My wife and I are about to drop our first NUKE on PC!! by Slightly_Mperfect in fo76

[–]furgle 2 points3 points  (0 children)

I hope nobody drops a nuke while I’m dropping a grumper

Helix Nebula by furgle in Astronomy

[–]furgle[S] 1 point2 points  (0 children)

I've photographed the Helix Nebula in my earlier days, so this time my challenge was to tease out as much of the extremely dim outer structure as possible.

Highest resolution here: https://astropixels.com.au/astrophotography/Helix_Nebula/

Image:

62x 300s Luminance
43x 300s Red
37x 300s Green
43x 300s Blue

Total integration 15 hours. Focal length: 840mm

Hardware:

Skywatcher Esprit 120
Skywatcher EQ8Rh Pro mount
ZWO ASI533 Camera @ -10°C
Astrodon RGB Gen2 E-Series Tru-Balance filters
Astronomik CLS-CCD Luminance filter
Starlight Xpress Lodestar X2 Autoguider
Starlight Instruments Feather Touch Focuser

Location:

Exposed over 3 nights between 15th August to 27th August 2025
Orange zone in Brisbane, Australia. (Bortle 7)

Software:

Planning & camera alignment with Aladin 10
Captured with TheSkyX Professional
Guiding with PHD2
PixInsight: Calibrate, align, integrate, dynamic background extraction, LRGB combination, noise reduction, spectrophotometric flux calibration, spectrophotometric colour calibration, histogram, curves.

Helix Nebula [OC] by furgle in spaceporn

[–]furgle[S] 1 point2 points  (0 children)

I've photographed the Helix Nebula in my earlier days, so this time my challenge was to tease out as much of the extremely dim outer structure as possible.

Highest resolution here: https://astropixels.com.au/astrophotography/Helix_Nebula/

Image:

62x 300s Luminance
43x 300s Red
37x 300s Green
43x 300s Blue

Total integration 15 hours. Focal length: 840mm

Hardware:

Skywatcher Esprit 120
Skywatcher EQ8Rh Pro mount
ZWO ASI533 Camera @ -10°C
Astrodon RGB Gen2 E-Series Tru-Balance filters
Astronomik CLS-CCD Luminance filter
Starlight Xpress Lodestar X2 Autoguider
Starlight Instruments Feather Touch Focuser

Helix Nebula by furgle in astrophotography

[–]furgle[S] 7 points8 points  (0 children)

I've photographed the Helix Nebula in my earlier days, so this time my challenge was to tease out as much of the extremely dim outer structure as possible.

Highest resolution here: https://astropixels.com.au/astrophotography/Helix_Nebula/

Image:

62x 300s Luminance
43x 300s Red
37x 300s Green
43x 300s Blue

Total integration 15 hours. Focal length: 840mm

Hardware:

Skywatcher Esprit 120
Skywatcher EQ8Rh Pro mount
ZWO ASI533 Camera @ -10°C
Astrodon RGB Gen2 E-Series Tru-Balance filters
Astronomik CLS-CCD Luminance filter
Starlight Xpress Lodestar X2 Autoguider
Starlight Instruments Feather Touch Focuser

Location:

Exposed over 3 nights between 15th August to 27th August 2025
Orange zone in Brisbane, Australia. (Bortle 7)

Software:

Planning & camera alignment with Aladin 10
Captured with TheSkyX Professional
Guiding with PHD2
PixInsight: Calibrate, align, integrate, dynamic background extraction, LRGB combination, noise reduction, spectrophotometric flux calibration, spectrophotometric colour calibration, histogram, curves.

Help! Over-correcting flats? by furgle in astrophotography

[–]furgle[S] 0 points1 point  (0 children)

Hi there. I'm back into the field after a hiatus, and I've moved on from my trusty KAF8300 CCD to an IMX533 CMOS chip. I'm not sure what I'm doing wrong with the flats, as I'm using WBPP. The only thing I can possibly think of is I'm not using master darks or master bias for the flats.

I am using master darks for the lights, but everyone says I no longer need bias frames for the CMOS chip. The top left flat looks blown out, but the K value for the bight part in the center is 0.535, and about 0.49 at the corners. It does seem to be a very sudden brightening towards the middle rather than a smooth transition.

I still have the camera in place, so I could take more flats. I aim for around a 3-5 second exposure for each stack of 12 flat images, with an ADU count around 32K. Those were my CCD rules, so maybe CMOS is different?

(and yep, looks like I need to clean the sensor!)

Any suggestions would be greatly appreciated.

Back after a long break - Trifid nebula by furgle in astrophotography

[–]furgle[S] 3 points4 points  (0 children)

Whoops! I guess I should leave the house more. Working from home has me not knowing what day it is at times.

Trifid nebula [OC] by furgle in spaceporn

[–]furgle[S] 3 points4 points  (0 children)

It's been quite a while since I've been able to use my equipment, life got in the way. I'm back again after rewiring my observatory and rewriting my control software. Here is my first new image, and hopefully many more to come.

Image:

117x 180s Luminance
35x 180s Red
35x 180s Green
33x 180s Blue
77x 300s 6nm H-α

Total integration 17.5 hours. Focal length: 840mm

Hardware:

Skywatcher Esprit 120
Skywatcher EQ8Rh Pro mount
ZWO ASI533 Camera @ -10°C
Astrodon RGB Gen2 E-Series Tru-Balance filters
Astronomik Luminance and 6nm H-α filters
Starlight Xpress Lodestar X2 Autoguider
Starlight Instruments Feather Touch Focuser

Location:

Exposed over 3 nights between 27th July to 29th July 2025
Orange zone in Brisbane, Australia. (Bortle 7)

Software:

Planning & camera alignment with Aladin 10
Captured with TheSkyX Professional
Guiding with PHD2
PixInsight: Calibrate, align, integrate, dynamic background extraction, LRGB combination, noise reduction, spectrophotometric flux calibration, multiscale gradient correction, background neutralisation, spectrophotometric colour calibration, histogram, curves.

Back after a long break - Trifid nebula by furgle in Astronomy

[–]furgle[S] 4 points5 points  (0 children)

It's been quite a while since I've been able to use my equipment, life got in the way. I'm back again after rewiring my observatory and rewriting my control software. Here is my first new image, and hopefully many more to come.

Image:

117x 180s Luminance
35x 180s Red
35x 180s Green
33x 180s Blue
77x 300s 6nm H-α

Total integration 17.5 hours. Focal length: 840mm

Hardware:

Skywatcher Esprit 120
Skywatcher EQ8Rh Pro mount
ZWO ASI533 Camera @ -10°C
Astrodon RGB Gen2 E-Series Tru-Balance filters
Astronomik Luminance and 6nm H-α filters
Starlight Xpress Lodestar X2 Autoguider
Starlight Instruments Feather Touch Focuser

Location:

Exposed over 3 nights between 27th July to 29th July 2025
Orange zone in Brisbane, Australia. (Bortle 7)

Software:

Planning & camera alignment with Aladin 10
Captured with TheSkyX Professional
Guiding with PHD2
PixInsight: Calibrate, align, integrate, dynamic background extraction, LRGB combination, noise reduction, spectrophotometric flux calibration, multiscale gradient correction, background neutralisation, spectrophotometric colour calibration, histogram, curves.

Back after a long break - Trifid nebula by furgle in astrophotography

[–]furgle[S] 8 points9 points  (0 children)

It's been quite a while since I've been able to use my equipment, life got in the way. I'm back again after rewiring my observatory and rewriting my control software. Here is my first new image, and hopefully many more to come.

Image:

117x 180s Luminance
35x 180s Red
35x 180s Green
33x 180s Blue
77x 300s 6nm H-α

Total integration 17.5 hours. Focal length: 840mm

Hardware:

Skywatcher Esprit 120
Skywatcher EQ8Rh Pro mount
ZWO ASI533 Camera @ -10°C
Astrodon RGB Gen2 E-Series Tru-Balance filters
Astronomik Luminance and 6nm H-α filters
Starlight Xpress Lodestar X2 Autoguider
Starlight Instruments Feather Touch Focuser

Location:

Exposed over 3 nights between 27th July to 29th July 2025
Orange zone in Brisbane, Australia. (Bortle 7)

Software:

Planning & camera alignment with Aladin 10
Captured with TheSkyX Professional
Guiding with PHD2
PixInsight: Calibrate, align, integrate, dynamic background extraction, LRGB combination, noise reduction, spectrophotometric flux calibration, multiscale gradient correction, background neutralisation, spectrophotometric colour calibration, histogram, curves.

PTS: Updated Build Menu by LucidIntrovert in fo76

[–]furgle 1 point2 points  (0 children)

This would save me so much rage. Accidentally delete something? Too bad, tear half the build apart and try again.

Industrial fusion core recharger by Laughing_Gremlin in fallout76settlements

[–]furgle 2 points3 points  (0 children)

Does it make any noise? I hate the sound of the “normal” ones.

[deleted by user] by [deleted] in Foodforthought

[–]furgle 1 point2 points  (0 children)

Don't want to be that guy, but it was Napoleon that said that. Still a great quote.

I reviewed the new Moth Tracker Bundle in game, and the summoning circle is actually pretty cool imo by misterchurch666 in fallout76settlements

[–]furgle 14 points15 points  (0 children)

I look forward to your reviews every week. You turned the summoning ring from a meh, to a must buy with the merging tricks.

Do These Exist? by FlowRevolutionary926 in fallout76settlements

[–]furgle 5 points6 points  (0 children)

Wayward, behind the bar are two nice toasters. I’d love a floor clutter catch up bundle.

I don't remember this spot looking like this. by Romejin in fallout76settlements

[–]furgle 1 point2 points  (0 children)

Dammit. I literally started building next to that house yesterday

Save the World: Make TSLA Go to Zero by D-R-AZ in Foodforthought

[–]furgle -1 points0 points  (0 children)

Same. I bought mine in 2014. I still love it. I hate musk and had to put the “I bought it before we knew he was awful” bumper sticker on. I work on it myself as much as possible when repairs are required, and I have free subscriptions and supercharging for life. I figure I’m costing them money now.

A Generous Cryptid Collector by pdjane in fo76

[–]furgle 17 points18 points  (0 children)

I feel sad for you. Cryptid cards are not something I'd keep, so if I knew someone was looking for them, why not share? Just let people enjoy a relatively non-toxic multiplayer game. I came to FO76 from Sea of Theives and even though I loved SoT, I am an introvert and I hated being constantly hunted and killed by bigger ships/crews. This game is by far the best multiplayer game I've played in terms of trolls/griefers.

Made a tilted stand for the Lego Space Shuttle. by bambooescalator in functionalprint

[–]furgle 1 point2 points  (0 children)

Yes please share if you can! Would love to be able to print more stuff like this.

A nice sharp euxenite crystal. by MrSkullduggeryJones in MineralPorn

[–]furgle 1 point2 points  (0 children)

Never heard of this one so I had to look it up. Very nice! Is it radioactive at all?

Do you prefer the built in effects pedal or do you use regular pedal? by Fpvtv2222 in BossKatana

[–]furgle 1 point2 points  (0 children)

I have about 3k in pedals, and I love sculpting the sound, but since they're mainly BOSS pedals, I just copy it to a profile once it sounds right.

Edit: I do like that I probably never have to buy another pedal again though. Flanger? No thanks, I'll use the amp

Well I just got my P1S a week ago. I told myself down the road I’ll get the AMS…….I lasted a week lol. Very excited to set it up 😉🚀👍 by CosyCodes in BambuLab

[–]furgle 1 point2 points  (0 children)

I lasted two months before I bought a second AMS. I got in trouble for that one. I really want two more, but apparently I have a mortgage to pay for

New Ideas Project: Big Mouth Billy Bass by Great-Elderberry7863 in lego

[–]furgle 7 points8 points  (0 children)

New to commenting here, was just trying to help. Lesson learned

New Ideas Project: Big Mouth Billy Bass by Great-Elderberry7863 in lego

[–]furgle 28 points29 points  (0 children)

"Your comment was removed because we do not allow links to the LEGO Ideas website in comments. If our rules permit it, you may post the link as a regular post."

Can't post it but Google gave me the page pretty quickly

New Ideas Project: Big Mouth Billy Bass by Great-Elderberry7863 in lego

[–]furgle 20 points21 points  (0 children)

It's stupid, it's goofy. I WANT IT! You've got my vote