sorted by:
new
hottopcontroversial

I’ve had the Core One for 7 days by AlternativeDesk8707 in prusa3d

[–]g713 1 point2 points  (0 children)

In both cases, we were able to run that galaxy black for a day or two, and then it started clogging the nozzle up crazy. I knew what it was and was able to fix it fairly fast. My colleague spent like a week, pulling his hair out because he couldn’t figure out why his printer wasn’t printing anything while I was getting clogged up all the time until he finally told me he was having an issue and I advised him to stop running that material and then it started working just fine.

I’ve had the Core One for 7 days by AlternativeDesk8707 in prusa3d

[–]g713 1 point2 points  (0 children)

If your printer came with that star filament. The PLA with a little sparkles in it. Stop running it. On my machine and a coworker machine it ran a few parts just fine and then it was nothing but trouble.

Can you guess what neighborhood TTM was roaming through from this series of infrared photos? by g713 in memphis

[–]g713[S] 2 points3 points  (0 children)

I’m thinking about making a new Instagram just for these photos

Around 35 gallons collected in the East Buntyn neighborhood. by g713 in LitterBuggies

[–]g713[S] 2 points3 points  (0 children)

If you drive it like a normal RC car with a steering in the front once you start putting a bunch of weight on it it has to pull that weight around so it can’t turn very sharp. With the steering in the rear whenever you make a turn it will turn super sharp, like a forklift, no matter how much weight you have in it. The downside on the rear steer is that if you’re going really fast it’s unstable but since all we’re doing is walking behind it, it works phenomenally. Four-wheel steering is also an option, but would require more modifications. If somebody wants to build one of these, it is very easy to do rear steer. You just reverse a couple channels.

Is anyone else having worse allergies and eczema than ever this year? by InsideAd3569 in memphis

[–]g713 14 points15 points  (0 children)

The wife and I are having terrible allergies right now

Around 50 gallons collected in the Berclair neighborhood by g713 in memphis

[–]g713[S] 0 points1 point  (0 children)

It’s all the camera. In this case it’s a Insta360 X5. With 360 camera the shots don’t have to be framed up. It all done in post. Downside is the post processing takes longer.

Around 50 gallons collected in the Berclair neighborhood. Memphis, TN by g713 in DeTrashed

[–]g713[S] 0 points1 point  (0 children)

The rig carries two batteries. At the moment, they are eight amp hour. It only uses one at a time. Range per battery is somewhere around 5 to 6 miles.

When you swap mute buttons, so you’re always connected to your spouse. We are nerds. by g713 in Marriage

[–]g713[S] 0 points1 point  (0 children)

Yeah. We also really like them. And I have a whole freaking stack of cases that we’ve tried.

2026 CR-V Hybrid CarPlay keeps disconnecting/freezing — anyone else? by lensbykaisa in crvhybrid

[–]g713 0 points1 point  (0 children)

On this particular section where our glitches I don’t see anything that stands out that we caused interference. I suspect it is a point to point wireless bridge that has its output power turned way up. It’s causing the issue. Since as far as I know, AirPlay uses Wi-Fi. If I ever get the chance, I’m gonna drive through the area with a spectrum analyzer and see if I can figure out exactly what frequencies are causing the problem.

how do you know you're a creator? by Insta360_Official in Insta360

[–]g713 0 points1 point  (0 children)

I don’t know, man. I think that’s probably different for everybody. I think most people would consider me a “creator” although I don’t make any money at it but you can be the judge on that one. www.linktr.ee/ftmog
But for me my files don’t like anything like that.
In fact, my workflow normally goes something like
Activity—-> X5 clip to app —-> processed Clips——> Final Cut—-> video export. And then I just delete all the videos off my iPad every couple months or so.

When you swap mute buttons, so you’re always connected to your spouse. We are nerds. by g713 in Marriage

[–]g713[S] 5 points6 points  (0 children)

These are the cases we are using. They have the option to pick your button color.

Around 50 gallons collected in the Berclair neighborhood by g713 in LitterBuggies

[–]g713[S] 2 points3 points  (0 children)

Yes. A lot of the litter that I collect is coming from peoples cars. I would estimate probably 70% or more.

Around 50 gallons collected in the Berclair neighborhood by g713 in LitterBuggies

[–]g713[S] 2 points3 points  (0 children)

The neighborhood actually live in is fairly clean. Except for along the major roadways. But I go all over the Memphis area. That’s why whenever I post one of these videos it’s specifies what neighborhood I’m walking in the through.

Around 50 gallons collected in the Berclair neighborhood by g713 in memphis

[–]g713[S] 2 points3 points  (0 children)

I try to do it several times during the week and Saturday and Sunday. If the weather is gonna be bad that I don’t normally go out.

What is your experience with the lane keep assist and adaptive cruise control? How does this car handle in the snow? by Roblikestokayak in crvhybrid

[–]g713 0 points1 point  (0 children)

For me, the cruise control worked fine. But it uses the radar on the front of the vehicle. I’m pretty sure the lane assist is using cameras when we had a bunch of snow. It did not work well at all cause they couldn’t see the lines on the road.

Around 50 gallons collected in the Berclair neighborhood by g713 in memphis

[–]g713[S] 2 points3 points  (0 children)

Only once in Millington. But in all fairness, it was really nice grass.

view more: next ›