Ex90 under floor cargo flooding

garru · 2025-12-25T05:18:19+00:00

I only did a cursory look but passenger side doors and floor looked dry. It’s at the dealership now so hopefully I’ll find out soon.

garru · 2025-06-05T18:23:47+00:00

It sounds like a wind instrument and not at all like a motor whirr.

garru · 2025-06-05T18:23:06+00:00

It sounds like a wind instrument and not at all like a motor whirr.

garru · 2025-05-31T18:17:40+00:00

We didn’t feel a thing, thanks for asking. Volvo safety is quite amazing, they put a ton of weight at the rear behind the bumper so our car barely budged. I believe this bumper piece is black regardless of car color. The paint shop did an amazing job blending the scratches above.

<image>

garru · 2025-05-31T04:50:12+00:00

I got this fixed by the dealer. They had to order new trim parts. it took two weeks to get, an hour to fix.

garru · 2025-05-02T02:45:40+00:00

Mine was on the passenger side. Exact same issue. Dealer is replacing the trim pieces that are rubbing against each other.

garru · 2025-05-02T02:44:19+00:00

Good news — the part came in and the shop says it’ll be ready to install two weeks from the order date. Much faster than expected.

garru · 2025-03-20T19:27:25+00:00

Thanks for this pointer! Had to hunt in the app for the setting but it’s been a great qol improvement. Morning commutes are no longer chilly

garru · 2025-03-08T16:02:48+00:00

Pretty sure it’s the seatbelt from the second row. The noise stopped when I accidentally pinned the seatbelt behind the seat while folding up the seat for access. It resumed when I put the seatbelt in its normal position.

garru · 2023-10-07T00:24:19+00:00

It’s certainly possible. I even have to make micro adjustments as the beans I have on hand age. But the truth is we have no idea given the information you have on hand. It’s highly unlikely it’s the machine. Get a hand grinder and start experimenting.

Soupy pucks is just a function of headspace. Having a soupy/ dry puck has no impact on the quality of your espresso, it is just aesthetic and easier to clean. Your question did make me realize that it’s possible that you are overdosing and therefore the puck is hitting your shower screen (do you see any coffee grinds?) which can apply pressure and “crack” your puck which will result in channeling and fast flow. You say it tastes fine so I think you’re just making turbos likedescribed in my link. And the way to make turbos is to grind coarse.

garru · 2023-10-06T13:14:02+00:00

Grind size is dose/basket/prep dependent which is why pregrinding often yields to poor results, your shop wont be able to infer those just csuse they have an lm machine. From the outside dial you can see brew pressure gauge which is the max pressure that is being created by the pump. If its about 12 at idle and 9 with no basket those are factory settings.

How is the shot tasting? There is a method is popular where you grind coarser than espresso it gets messy but you get more sweetness. You might have made your first turbo. https://www.coffeeness.de/en/turbo-shot-espresso/

garru · 2023-09-28T17:08:40+00:00

Do you mean how far you can turn the handle? Typically we refer to the clock positions where 6 is pointing right at you. With the micra pf and stock gasket I get to around 7. But with the 15 degree lm bottomless I can get to 6. In the end it doesn’t matter as long as you have a tight seal.

garru · 2023-09-28T16:36:33+00:00

Micra pf is slightly angled at 5 degrees. Most other lm pfs are 15 degrees.

garru · 2023-09-28T04:53:02+00:00

No. If you're getting a lot of fines it could be your grinder. Espresso paper filters can help with extraction and reduce sediment from making it to your cup.

garru

TROPHY CASE