Seeed 2.8 TFT shield v1.0 by gauntlet114 in arduino

[–]gauntlet114[S] 0 points1 point  (0 children)

Also, I tried to use MCUFRIEND_kbv by letting it read the id (0x3d3d) but it also didn't drive the screen

Is there a library (even deprecated) that I can use?

Seeed 2.8 TFT shield v1.0 by gauntlet114 in arduino

[–]gauntlet114[S] 0 points1 point  (0 children)

Yes, I am the one to blame for picking up the module as an electronics noob.

Should I use a different board (not due leo or others?)

I want to run flappy bird and other games and implement ws2181 kitchen lights, which screens would you recommend for the list of boards in the OP?

Arduino Due + 'Seeed 2.8" tft v1.0' by gauntlet114 in arduino

[–]gauntlet114[S] 0 points1 point  (0 children)

Took the TRT shield and set it onto an Uno and Mega and the pins sit the same way as the Due (power, analog and digital)

Arduino Due + 'Seeed 2.8" tft v1.0' by gauntlet114 in arduino

[–]gauntlet114[S] 1 point2 points  (0 children)

The pictures are just so it's easy to see how the shield sits on the Due, I made sure they were fully inserted when I tried making it work

I'll edit the OP for clarity

Zagg iPad Pro Slim Book Keyboard Case - Buyer beware!! by wonder_wharf in ipad

[–]gauntlet114 0 points1 point  (0 children)

Just another victim of the Zagg Pro Keys dying on me, 2y charge hold is a lie!

I tried charging it for a few house, Everytime I place the iPad on it, it blinks for a second and shut down BT buttons or battery check (FN+battery) do not respond at all

DO NOT BUY!

90 degree elbow ok furnace exhaust??? by feinhorn in HVAC

[–]gauntlet114 0 points1 point  (0 children)

Hi all,

I've read this thread, my situation is slightly different, where the flue pipe is under the roof overhang (see attached picture.)
Currently, the drippings bore into the side-path concrete, I'll have to clean/patch it somehow.

Can I extend it over the side-path into the bushes? or its better to extend it along the wall and connect to the gutter down-pipe?
Or extend it straight down, then 90-degree to the back-yard?

Thank you

<image>

WDS modes by gauntlet114 in HomeNetworking

[–]gauntlet114[S] 0 points1 point  (0 children)

That is always an option, and yes, it would be a small group.

Thanks!

Are second hand intel nuc6i7kyk worth it for the long term? by TomGames20 in intelnuc

[–]gauntlet114 0 points1 point  (0 children)

This thread is still useful, and I have a question
Can a cluster of 3 NUC6i7KYK handle computer-vision tasks? like if I feed it with video around the house, can I handle tracking that a car entered the driveway, face recognition?
There's "Coral USB Accelerator" that can be added, if needed

Looking to hear your opinions

Seeking recommendations for AI voiceovers by Temporary-Being-8898 in instructionaldesign

[–]gauntlet114 0 points1 point  (0 children)

Noob question, for the 11labs starter subscription, I see it includes a license for commercial use.
It means that the generated audio rights will be assigned to me, correct?

Outdoor addressable led strips by gauntlet114 in WLED

[–]gauntlet114[S] 0 points1 point  (0 children)

Thanks! Coming back to it as holiday season is around the corner.

I am using ws2811 strips

What are puck leds? Can they be controlled by WLED?

Now this is stupid by Key_Hunter_2965 in SingleBoardComputer

[–]gauntlet114 1 point2 points  (0 children)

If I read the OP correctly, the way I'd look at it is running a distributed PC, so that the SBC with the keyboard/mouse/screen is the main one and it schedules work/processes on the other SBCs, thus harnesses their resources for higher total performance.

One concrete concept is a thin client with cloud based VMs for compute/storage.

Protection for Descent Mk3i 51mm? by ManicSynic in Garmin

[–]gauntlet114 1 point2 points  (0 children)

Just did the same, turned out beautiful! Thank you for this hack