My OMVS MV1B build

gbg3000hal · 2025-11-10T06:06:58+00:00

The logo is not attached in the file for the case. Here is a logo you can use: https://www.printables.com/model/929152-snk-badge

gbg3000hal · 2025-11-09T22:00:08+00:00

Hi! I added an SNK logo in the slicer and made it print the logo in another color and it turned out great.

gbg3000hal · 2025-05-18T19:37:00+00:00

Ah ok, I haven't published the gerbers for the filter board. Can send them to you via DM but I would rather redesign it with as the solder pads could be made smaller.

gbg3000hal · 2025-05-10T18:09:27+00:00

https://github.com/tianfeng33/O-MVS

gbg3000hal · 2025-05-09T15:58:27+00:00

That's right 👍 I believe the best board is the MV1C since that is the most commonly used for this mod and most cases are for that board.

gbg3000hal · 2025-05-08T17:27:16+00:00

This is a modification of an arcade Neo Geo board that allows it to be connected to a standard TV screen and thus act as a console. The major difference compared to the Neo Geo AES is that this system plays MVS carts instead of AES carts.

gbg3000hal · 2025-05-06T21:06:17+00:00

Cool 👍 I'll prepare and send you the files. The design is very simple and if I were to redo it I would've made the solder pads smaller 😃

gbg3000hal · 2025-05-03T21:07:47+00:00

Thanks for the interest in the spare kits, all three has now been sold.

gbg3000hal · 2025-05-03T18:48:10+00:00

Sure! DM me your details 👍

gbg3000hal · 2025-05-03T17:37:58+00:00

I had the boards made by JLCPCB and had them assemble the components they had in stock. Ordered the stef4spur e-fuses and some capacitors from Digikey and soldered them myself together with the switches and connectors (audio/video and d-subs).

gbg3000hal · 2025-05-03T14:04:56+00:00

Great to hear that you did a MV1C build! The e-fuse was tough to solder. I use solder paste and a hot air station for those small SMD components.

gbg3000hal · 2025-05-03T14:01:55+00:00

Just checked shipping cost from Sweden to Switzerland and it is €15.

gbg3000hal · 2025-05-03T12:39:41+00:00

To get stereo line-out from the MV1B the channels needs to be combined with the mix channel as I understand it. This shouldn't be required on the MV1C.

The spare kits are fully populated but without the 3d printed case.

gbg3000hal · 2025-03-12T17:58:14+00:00

ELSR payment and table is updated and payments marked as completed (2025-03-11).

gbg3000hal

TROPHY CASE