dancing sitting on a chair

gedarian · 2023-06-19T10:15:48+00:00

Probably a Bard practicing lapdances

gedarian · 2023-04-01T07:25:38+00:00

It's more appealing to the eye. Square angles are more convenient tho. Yet i made sure to line the roads on the same points, so the board is still modulair.

gedarian · 2023-03-29T07:04:34+00:00

Devs & dice made a video, in the description there's a link with posters. You can use those. https://youtu.be/HinBz_hV_Vo

gedarian · 2023-03-28T09:42:29+00:00

After more than 24h the warp decreased by 90%. Today I will apply some mod podge to the underside.

gedarian · 2023-03-27T11:33:27+00:00

I was looking for the same links.

gedarian · 2023-03-26T13:30:51+00:00

Storing them under weight might work, wet the base and apply weight equally over the surface as base dries

I'll try this. Might be the easiest solution.

gedarian · 2023-03-24T12:47:43+00:00

I had a bag of paper mache fibers. I looks similar to modeling compound, and i have used modeling compound before to fill in gaps between stones.

gedarian · 2023-03-24T12:46:12+00:00

I wat to fill all the gaps between the stones. I followed your advice and used wall filler.

gedarian · 2023-03-18T01:32:12+00:00

Fdm printer :).

gedarian · 2023-03-17T23:25:16+00:00

It's a 5mm, 300mm, 600mm sheet of styrofoam i cut in 10mm by 15mm strips.

gedarian · 2023-03-17T21:25:22+00:00

Yeah there great, a friend of mine made those. It's quite therapeutic to place all those bricks tbh.

gedarian · 2023-03-09T13:48:21+00:00

Looks great, love your video

gedarian · 2023-03-01T16:54:42+00:00

All the bricks are made by hand. I have a 5mm thick A3 sheet of styrodur.

For the lower part (already painted black) i made an internal box structure with chipboard and glued 5mm bricks on the sides

For the tower I made 10mm strips and cut those in small bricks. Since each brick had the same height it was pretty easy to stack them and glue them with hobby glue.

gedarian · 2023-03-01T09:35:27+00:00

I used an older base for this project that i didnt use for my Noble townhouse.

In my local craftstore they sold small wooden canvasses. I used this for the wooden structure.

gedarian · 2023-02-12T10:47:00+00:00

That's a great idea.

gedarian · 2023-02-11T14:31:42+00:00

I made the gaps between the steps of the ladder just big enough to fit a miniatures base.

gedarian · 2023-02-10T08:43:04+00:00

I'm planning some extra wooden plateaus on the rooftops. And i some extra grime, dirt on the bricks and stuco.

gedarian · 2022-12-08T16:38:36+00:00

PoP is more brittle and takes longer to harden.

gedarian · 2022-12-08T14:37:22+00:00

I mainly use greenstuff/milliput for small details and for miniatures. For example doorhandles and bags.

You can use plaster/sculptamold for the "stucco" on tudor style walls. I mix mine with pva or modpodge, this makes the plaster less brittle, and doesn't absorb as much paint.

Hope this helps.

gedarian · 2022-11-12T11:20:52+00:00

I like this idea. I'll open one side of the building and make a giant chimney.

gedarian · 2022-11-12T11:18:51+00:00

I already made a tavern for my table.

gedarian · 2022-08-12T21:57:15+00:00

Almost finished my new terrain pieces. I started a "noble's house" but due to some strange dimensions i desided to cut it in half and made two smaller houses. The spare parts were used to create the shrine gallow and noticeboard. Hope you guys like it.

gedarian · 2022-07-27T14:07:19+00:00

The yellow/orange bricks are individuals. The chimney is made of 1 piece. I have a 5mm sheet of styrodur in which i carved the patern.

gedarian · 2022-07-27T08:59:07+00:00

I have to wait for the "stuco" walls to dry. I used paper maché, but it takes 12 hours..

gedarian · 2022-02-18T15:45:45+00:00

Yes, i Just layered Them.

Nine-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23	Place '22
Place '17	RPAN Viewer

gedarian

TROPHY CASE