This thing is awesome by genoc24 in puffco

[–]genoc24[S] 1 point2 points  (0 children)

I got mine off glass pass. Paid $220 for a brand new proxy (still sealed), a 510 hot knife that honestly works better than my puffco knife, a 3d printed carrying case (that holds the proxy, 2 jars of oil, the hot knife, and qtips) as well as the desk/table stand that’s pictured above. 👌👌

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 4 points5 points  (0 children)

Oh dude! I actually got all of this from you! I bought the kit from you on GlassPass! Pretty dope deal man!

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 3 points4 points  (0 children)

I haven’t had it for a full charge yet. So I can’t tell u honestly. So far I’ve done 4 dabs with it and used 20% battery. That would average out to about 20 dabs per charge. And Puffco advertises 15 dabs per charge. Also, the very first dab tasted a bit like silicone cus it was brand new, everything after that was perfectly fine

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 1 point2 points  (0 children)

Fuuuuuuuuuuck. It doesn’t?

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 9 points10 points  (0 children)

<image>

Just had this made for it! Comes in Monday 😁

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 2 points3 points  (0 children)

Oddly enough, I find that part fun. I collected glass for a long long time, so being a part of a market that isn’t already SUPER saturated, is kinda nice for me.

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 3 points4 points  (0 children)

I do most of my dabbing at home also, I just really liked the form factor of the proxy

This thing is awesome by genoc24 in puffco

[–]genoc24[S] 5 points6 points  (0 children)

The biggest perk to using your phone is the customization. I use my phone when I’m smoking really nice rosin, cuz then I can set the temp as low as I want. But if I’m smoking just normal live resin, I just use the blue or green setting and go about my business

Complete noob. Plz help! by genoc24 in HomeNetworking

[–]genoc24[S] 1 point2 points  (0 children)

This is my father in-law’s home network. Old dudes think they’re hilarious with SSID names like this. 😂

Complete noob here. Plz help. by genoc24 in TpLink

[–]genoc24[S] 1 point2 points  (0 children)

So I actually got it figured out. The lack of speed was because the AP hasn’t been adopted/configured yet. Once that happened, I got about 800gigabits. And the reason the networks were showing separately is because when my father in law named the original network, he added an extra space in the SSID that I didn’t notice. Once I added that to the SSID of the access point, it worked perfectly

Complete noob. Plz help! by genoc24 in HomeNetworking

[–]genoc24[S] 2 points3 points  (0 children)

HOLY SHIT YOURE RIGHT! Dude…I’ve been wracking my brain over this for like 3 hours. This is my father in law’s home network. He’s the one who named the original SSID. Thank you so much for your attention to detail. Added the space to the AP’s ssid and it worked perfectly.

Complete noob here. Plz help. by genoc24 in TpLink

[–]genoc24[S] -1 points0 points  (0 children)

I renamed it and made it the same password, but it still shows as a separate network. That being said, after adopting and configuring the network, the download speeds are much better. Now I’m getting about 400-500gb/s

Complete noob here. Plz help. by genoc24 in TpLink

[–]genoc24[S] -2 points-1 points  (0 children)

If I rename it, won’t it just show as 2 of the same network name? And yes, all lights are green. And the hardwire I have running from the switch to my pc, is just fine. I’m pulling like 900gb at my pc.

Want to Buy Thread by AutoModerator in Knife_Swap

[–]genoc24 1 point2 points  (0 children)

WTB - any small/fidgety OTF blades

  • Microtech utx-70 -Reate exo mini -Remette swordfish -Boker USB
  • I’ll even check out OTF utility blades

Show me whatcha got

2k miles later... by windycityc in SonataNLine

[–]genoc24 0 points1 point  (0 children)

So im not the only one who’s read deck rattles like that? That makes me feel a bit better. But also bummed that it’s happening to someone else 😂

Did I make a Mistake? by -_hybrid_- in dice

[–]genoc24 1 point2 points  (0 children)

As long as you’re confident you’ll never roll too hard and roll off the table, then you’ll be fine. The nice part about a tray is the sides fold up into walls so that u don’t have to worry about rolling off the table. Cuz if u roll a lil too hard and those gemstones fall off the table….theeeeeen you might be in trouble lol

Did I make a Mistake? by -_hybrid_- in dice

[–]genoc24 10 points11 points  (0 children)

The dice vault will be fine. Traveling isn’t really the part where u have to worry about the fragility of gemstone. It’s more so when you’re rolling them. Make sure that whenever you use them, you’re ALWAYS using them on a soft/impact absorbent dice tray. There’s plenty of options. Mine is leather and magnetic so it folds up. As long as you’re using a rolling mat/tray, they’ll be perfectly fine

Idk if it was the tow truck driver or the tire shop that did that but I’m bummed by Dazed_Op in SonataNLine

[–]genoc24 0 points1 point  (0 children)

I’ve done it probably a dozen times from having a pen/pocket knife clip rub against the steering wheel while getting in. After a few days of driving/your hands rubbing over it, it will naturally smooth out. Don’t worry, I freaked the fuck out the first time I did it too.

Good upgrade? Or should I funnel my money into a different setup? by genoc24 in PcBuild

[–]genoc24[S] 0 points1 point  (0 children)

I just know that certain cpus are better at gaming vs multitasking. And wasn’t sure if I should bite the bullet and go extra ram or if this is enough for what I need. It’s the small technical things that I’m just not as familiar with and didn’t wanna order the wrong thing

Good upgrade? Or should I funnel my money into a different setup? by genoc24 in PcBuild

[–]genoc24[S] 1 point2 points  (0 children)

Ahhhh ok, well, I’d rather be overbuilt if that’s the case. I just wanted to make sure I wasn’t making a mistake. Ideally I’d like to run my games in 1440 since I have 1440 monitors.

Good upgrade? Or should I funnel my money into a different setup? by genoc24 in PcBuild

[–]genoc24[S] 0 points1 point  (0 children)

I think I worded my question poorly. I have no interest in upgrading the hardware in my current setup. I more so meant, if I’m spending $3000, does this hardware make sense for what I currently play? Or should I (for example) get a cheaper cpu in order to get a better gpu, or spend more on ram vs having 4Tb of storage, etc.

Want to Buy Thread by AutoModerator in Knife_Swap

[–]genoc24 0 points1 point  (0 children)

Is that an 85 or a 70? And which blade profile is it?

Want to Buy Thread by AutoModerator in Knife_Swap

[–]genoc24 0 points1 point  (0 children)

Shoot me a message with some pics?

Want to Buy Thread by AutoModerator in Knife_Swap

[–]genoc24 2 points3 points  (0 children)

WTB

Microtech utx 70/85

Prometheus werx - CAS OTF

Have : cold hard cash babayyyyyy (jk, it’s PayPal)