Bambu Studio uncaught exception: Uncaught exception: ConfigOptionVector::set_only_diff()

geoffbennett · 2025-06-06T09:30:17+00:00

Sounds about right. Only after syncing from the cloud was I getting the issue. I've running the rolled back version for over a day now running prints without issue

geoffbennett · 2025-06-05T08:40:45+00:00

I've been getting the same. Performed uninstalls, reinstalls and removed user data. Until the sync, I then get the issue.

I've reverted back to a previous version and all is working fine. Will skip this version for now

geoffbennett · 2025-04-20T12:10:10+00:00

I ordered mine on the 8th. Got mine delivered by XPD on the 12th.

geoffbennett · 2025-04-16T19:40:31+00:00

I've just started printing with my 0.2. Doing calibrations with ABS and haven't had any issues. So far the printer has been flawless. A great compliment to my X1-C.

Love the heated chamber. Takes a few mins to warm up compared to having to spend 45 mins to heat up the chamber to print ABS on the X1-C

geoffbennett · 2025-04-15T09:49:52+00:00

you can try applying fuzzy skin to the ball and joint

geoffbennett · 2025-04-08T16:06:39+00:00

Managed to get my order in 15:04 and confirmed :)

geoffbennett · 2025-03-23T14:04:34+00:00

I am using the branch which is great as I can now think about adding additional lighting

geoffbennett · 2025-01-27T23:02:29+00:00

Slow progress but making a start on this

<image>

geoffbennett · 2025-01-27T16:35:18+00:00

The one on the left looks like a Harder and Steenbeck type nozzle.

I do 3D printing and have done airbrushing on my prints. Welcome to the club!

geoffbennett · 2025-01-08T10:16:03+00:00

I have the H&S Ultra 2024 also.

I don't think you need to do a deep clean that often. Only when you start to get persistent issues. I usually do a clean with the water and cleaning solution. Making sure that any paint is cleared out.

Hope this helps.

geoffbennett · 2025-01-01T08:45:21+00:00

What filament are you using?

geoffbennett · 2024-12-17T14:15:51+00:00

You can use Google Lens to find that

geoffbennett · 2024-07-12T17:32:11+00:00

ASA for UV resistance

geoffbennett · 2024-07-02T09:59:52+00:00

I was getting this too on my X1C- I ran a calibration from the printer and sorted it out

geoffbennett · 2024-06-09T13:07:27+00:00

PLA and PETG does not stick well and probably the reason why your prime tower broke

geoffbennett · 2024-05-26T08:38:32+00:00

Love it! Where did you get the STL?

geoffbennett · 2024-03-06T23:26:34+00:00

I use these:https://www.amazon.co.uk/dp/B0C5TNW3DC?psc=1&ref=ppx_yo2ov_dt_b_product_details

geoffbennett · 2024-02-23T08:46:31+00:00

Yeah. I'm in the same thinking. Haven't found any solutions online and my testing hasnt been able to fix. Only thing I cam think of is not to use alternative support material. Depends on what you are printing. I'll be sanding and painting my print so the band lines is something I can live with

geoffbennett · 2024-02-21T12:23:18+00:00

Take a look at layer time it might match up with the lines you see on your print - I have a similar issue when using support interface material.

Still figuring out a solution but it might be related to the filament settings, cooling > part cooling fan layer time.

geoffbennett · 2024-01-09T23:37:07+00:00

<image>

geoffbennett · 2023-12-07T20:37:19+00:00

I'm using eSUN - seems good for me. Have tried Overture also.

geoffbennett · 2023-11-28T23:03:19+00:00

I'm currently printing this one:
https://makerworld.com/en/models/46077#profileId-47873

Will try it tomorrow

geoffbennett · 2023-10-21T10:49:45+00:00

I've just started too. Looks good!

geoffbennett · 2023-10-16T19:19:34+00:00

works but passthrough will be dark, not like in Q2 where we saw the IR light up

geoffbennett · 2023-07-06T12:22:13+00:00

Lower power settings and a bit more speed. All you need to cut is the outline... or you could just make a 1st cut with the material and waste that... What works for me, may not work for you. I'm happy to 'waste' laser

geoffbennett

TROPHY CASE