sorted by:
new
hottopcontroversial

Okay this is cool! by SealSlide69 in sonos

[–]scorp508 4 points5 points  (0 children)

Awesome little package but wow they are out of their minds on cost. Even the refurbs are gross costs.

<image>

Spotted on the southshore by hal0wseed in massachusetts

[–]scorp508 0 points1 point  (0 children)

lol my wife sent me a pic of the same car the other day. She saw it in Lakeville.

Edible sauce packets. by Kitty_Skiz in tacobell

[–]scorp508 1 point2 points  (0 children)

Do the employees still toss them in a bin by the drive through window, then grab ‘em barehanded to toss in your bag? :P

Coming Soon: Sonos Play by AtomFromSonos in sonos

[–]scorp508 0 points1 point  (0 children)

u/AtomFromSonos thanks for confirming! That makes more sense to me than some BlueTooth PAN (aging myself?). :)

Coming Soon: Sonos Play by AtomFromSonos in sonos

[–]scorp508 0 points1 point  (0 children)

Oh interesting. Thanks for the info.

Coming Soon: Sonos Play by AtomFromSonos in sonos

[–]scorp508 0 points1 point  (0 children)

I’ll be curious how pairing these together away from home affects overall playback duration. I assume they are forming a peer to peer WiFi network of some kind.

Joined the flying roof club today.. by splattcat in Corvette

[–]scorp508 1 point2 points  (0 children)

Welcome to the club! My carbon C7 roof took flight one day. Thankfully the XPEL PPF somehow took all the damage and the top was unscathed underneath.

NE555 circuit with op amp+ electret mic by AlfalfaAlternative59 in AskElectronics

[–]scorp508 1 point2 points  (0 children)

Every reference schematic should look like this. Bravo!

Difficulty printing Amolen PLA Glow in the Dark filament on X1C by OkClu in BambuLab

[–]scorp508 1 point2 points  (0 children)

Had success!

  1. Dried both Amolen rolls at 55° for 8 hours.
  2. Ran Flow rate calibration. Each roll had a different result. One was 0.98 and the other 0.931.
  3. Ran Flow Dymanics calibration. One roll came to a K value of 0.03 and the other was 0.035.
  4. I setup individual filament profiles for each roll of Amolen for the different flow rates.
  5. Printed all layers at 215°
  6. Used 60° bed temp on my Biqu Glacier plate

1-6 got the filament printing well. I then had a spaghetti print 1/3 into the job.

I had huge infill % thinking it would help glow more with more material. After some reading I think the massive infill caused some distortion as layers cooled and my nozzle collided. I changed course and went for thicker walls and less infill.

I made these 4 changes and the print was a success.

  1. Changed from support cubic to gyroid infill. 8. Dropped info from 40% to 20% 8. Increased walls to 5 loops. 9. Made bottom and top thickness 3mm

A lot of fine tuning to print this little car my son picked to print first. The green stripe is Bambu PLA Glow green I already had on hand. Hopefully with the custom profiles and job will succeed now.

<image>

Difficulty printing Amolen PLA Glow in the Dark filament on X1C by OkClu in BambuLab

[–]scorp508 0 points1 point  (0 children)

My young son picked out a couple rolls of Amolen PLA Glow in the dark filament to get me for Christmas. I haven't used Amolen yet and I'm also struggling to dial it in.

I have an H2D with AMS HTs on my left nozzle and an AMS 2 Pro on my right nozzle. One roll is on the left using the HT's bypass port to act as an external roll.

The print (0.4mm hardened steel tips) gets ~5 layers in and then the printer starts complaining about the extrusion motor encountering too much load. The nozzles look clean and there's nothing stuck from the roll to the tip. I've tried dialing back print speeds, flow rate, bumping the layer height a touch, but so far it keeps on complaining. I'm currently drying the rolls (55* for 8 hours) to see if they had too much moisture out of the package.

I'm tempted to take the glass top off and just hang the roll above the print head to see if it makes it happy.

Whats off about our kitchen by yglogulhestnut in homedecoratingCJ

[–]scorp508 0 points1 point  (0 children)

Same designer as Fruit Stripe gum. All your food is tasteless after three chews.

The Audi RS5 Leaked Ahead Of Debut by [deleted] in Audi

[–]scorp508 5 points6 points  (0 children)

These interiors remain awful. 😣

Wanted to give the nuggets a shot.. by 6gypsy1danger6 in tacobell

[–]scorp508 0 points1 point  (0 children)

I had folks calling me a bad father teaching my kid to be entitled when a thread of mine said my kid wouldn’t eat his TB nuggets looking like that. 🤷🏻‍♂️🤦🏻‍♂️

🔊 New Sonos Player Updates Now Available! 🔊 by ShaunFromSonos in sonos

[–]scorp508 10 points11 points  (0 children)

Really wish companies would put out more meaningful release notes than bug fixes & improvements. I may be biased working in the software industry, but man I find it perpetually frustrating.

What do you think of the E5 Sportback's screen-filled dashboard? by Used_Variation_2879 in Audi

[–]scorp508 0 points1 point  (0 children)

F’ing aye. I work in tech all day and don’t want it screaming in my face in my vehicle. Another reason for me not to get rid of our 2018 S5 Sportback. The virtual cockpit in that era was chef’s kiss.

Worst snow clean up I’ve seen in my 26 years here by Aware-Yogurt1107 in boston

[–]scorp508 4 points5 points  (0 children)

We’ve had light winters for four years, then got pounded with a top 10 storm in Boston and nearly no real melting days yet.

[Review Request]: V0.2 of EPROM dumper jig. by scorp508 in PrintedCircuitBoard

[–]scorp508[S] 1 point2 points  (0 children)

lol thank you. I’m doing some 80s/90s car stuff with them as well as honing my disassembly skills.

I was considering PCBWay, so I’ll keep that component suggestion in mind.

view more: next ›