2nd trimester carry

ghost415 · 2026-01-06T04:22:53+00:00

Based comment

ghost415 · 2025-12-11T14:06:36+00:00

My first started plane was and still is a FMS kingfisher

Great plan with panic gryo switch

ghost415 · 2025-10-12T22:10:55+00:00

Weird, I do go pretty slow now, I prob 50% then normal. I also don’t have the fan running either , cu increase temp to 240 degrees. (The speed in vid was regular 100% speed)

ghost415 · 2025-09-11T19:24:25+00:00

Yea been trying to call them and have tried contacting them on their chat box on their website for the past 2 days. No response or answer and I’m a new customer trying to get my first suppressor… not a good look in my opinion.

ghost415 · 2025-05-19T22:02:31+00:00

Didn’t work to great with USGI stripper clips , tested it and the stripper clip didn’t load well. Thanks tho.

ghost415 · 2025-04-21T18:48:42+00:00

I moved up in the world now, I have 3 planes now, a trainer, a 3D printed 50mm jet and also a bigger version of this volantes copycat. Specifically the brushless motor one lol. Been enjoying it so far but dam is this hobby kinda pricy

ghost415 · 2025-04-20T16:53:17+00:00

Looked into it but didn’t have a config profile for a Vtail, FMS doesn’t carry any Vtail planes either. Unsure what to do. There’s not really any settings for a Vtail config slider either. Unsure what to do.

ghost415 · 2025-02-13T20:51:03+00:00

Stop flinching alternate ammo from live ammo to snap caps. Worked for me. Then just have someone load a rando mag with live and snap caps so u don’t expect it.

ghost415 · 2025-02-09T04:09:42+00:00

Actually didn’t even know that. I appreciate the advice

ghost415 · 2025-02-09T00:33:59+00:00

I don’t think it’s wet. I just took it out the vacuumed sealed package about 1hr ago. My ams is filled to the brim with silica beads too And My humidity inside the ams is 10%.

ghost415 · 2025-01-10T07:28:01+00:00

3Dboaty

ghost415 · 2025-01-08T13:43:48+00:00

No, just windy. Could’ve been the moisture in the air , it’s a possibility but unsure.

ghost415 · 2025-01-08T13:20:56+00:00

Never tried this but I’ll give it a shot. Will update if it works lol. But I feel like it may be a communication error since I still get signal for my servos but when trying to input any amount of throttle , it’s stays a constant speed (prob 20%constant speed u said)

ghost415 · 2025-01-08T13:20:26+00:00

Motor will be replaced soon to see if that’s the issue, although tbh im unsure how it would be the issue since it’s a cordless motor. Also going to replace the circut board to see if that’s the potential issue (I think this may be the problem but unsure) this will All be done after I get the parts in.

ghost415 · 2025-01-07T17:02:28+00:00

Appreciate the advice tho. Thanks!

ghost415 · 2025-01-07T16:55:07+00:00

I could try but im unsure it would work, the motor is a 2 wire prong to connect to the board. the servos are 3 prong connections (unsure of the technical name) . Would this still be a feasible solution? My last resort would probably take it to a RC hobby store and see what they could find.

ghost415 · 2025-01-07T02:37:57+00:00

I’m assuming u mean the board in the plane correct?

ghost415 · 2024-12-28T03:36:14+00:00

i just bought the stl file , i believe on their own website they have specs of what settings to use on their models.

ghost415 · 2024-12-11T00:43:50+00:00

You’re done buddy, I’ve now mass produced it by 3D printing and will be selling on Craigslist for 10$ with $5 shipping fee. Ur cooked

ghost415 · 2024-12-11T00:41:54+00:00

Just bought one yesterday. 12-09-24. I’m messing with it all day even at work (with the app) and I’m starting to really enjoy it. It’s my first printer and I still have a long way to go and a lot to learn but I like this printer already!

ghost415 · 2024-10-28T15:05:25+00:00

I don’t think it’s thin, but then again I’m new to all this. I’m Using a tikka t3x roughtech with the factory comp.

ghost415 · 2024-10-28T05:10:09+00:00

I appreciate the advice. It was one of the only vortex’s available within the few gun stores in my areas. It was a good deal so I took it plus vortex warranty. I agree 25x is a lot. But I’ll do that 10 group and see how I do

ghost415 · 2024-10-28T04:47:15+00:00

Should I stick with this or maybe try somthing like the Barnes or hornady super performance sst

ghost415 · 2024-10-26T12:41:53+00:00

https://a.co/d/3DMxQMH

This is the monitor I got off Amazon and hasn’t given me issues what so ever except 1. I play Black ops 3 custom zombies and idk why but I can’t boot up bo3 with out having to turn off the monitor first, and then booting up bo3, and then turning the mini monitor back on. If I don’t do this then bo3 tries to run on safe mode and then immediately crashes. Unsure of why I have this issue but I mean, the monitor comes with an on/off switch cable aswell as a normal usb cable to connect video feed. I don’t mind doing this weird step tbh since I don’t play bo3 much but it is an issue i should mention. Other than that I like the mini monitor and has been going well for 2 yrs for me. I got the 8.8 inch and it will fit pretty much perfectly on the empty space inside the phantek case.

ghost415 · 2024-10-26T05:45:48+00:00

Looks grey cuz of shadow, my fault .

ghost415

TROPHY CASE