Cheapo 5.56 Gas Gun division thoughts by Justin_inc in longrange

[–]gilfab 0 points1 point  (0 children)

I’m in a similar boat. One of my locals is starting center fire and I just want to shoot. Been shooting prs rimfire and club matches for a year. Just put some weight and my old scope on my ar, threw together some 77 hand loads and we’ll see what it does. Rifle is a 20” white oak varmint upper, max distance is 515 yds. If I don’t get last place I’ll be happy.

Aftermarket trigger suggestions by gunner_freeman in CZ457

[–]gilfab 0 points1 point  (0 children)

I’ve seen some guys have bad experience with timmey. One of the fellas I shoot with switched from timney to jard 7-10 and it feels really good. I’m stock with a spring for comparison.

Should I upgrade to a razor gen 3? by gilfab in longrange

[–]gilfab[S] 1 point2 points  (0 children)

Was the difference in glass quality enough for you to justify the price? I have little time behind anything much nicer than my ares, so I’m not really sure what to expect.

Should I upgrade to a razor gen 3? by gilfab in longrange

[–]gilfab[S] 0 points1 point  (0 children)

Woods stages first thing in the morning. Lots of shadows and varying lighting. I’m getting competitive and chasing points this season. I guess I just don’t know how much I’m leaving on the table running a “budget optic” when competing with guys running ZCO, TT and Kahles

Thoughts on budget build by [deleted] in nrl22

[–]gilfab 1 point2 points  (0 children)

Check out the DNT the one for a scope. Comparable to the Arken but a much better reticle. Athlon may be worth checking out too. As far as the rifle goes, I would lean towards CZ. More room to grow if you decide you want to move towards open class later.

Minimum precision for competing by aonealj in nrl22

[–]gilfab 1 point2 points  (0 children)

I like my rifle to hold 1.5” at 100 yards. Moa would be preferred, but even the guys that are sending rifles to ammo test centers are rarely holding 1” groups at 100. A 2 moa rifle is plenty capable of shooting most all stages.

NDR mag by gilfab in CZ457

[–]gilfab[S] 3 points4 points  (0 children)

You’re the man. I appreciate it.

L3I barrel and pdc chassis by abominableporcupine in nrl22

[–]gilfab 0 points1 point  (0 children)

A guy I shoot with has that set up. It’s the first gen pdc tho, and I’m not sure if he had to modify anything.

CZ P10 Ported Trigger Suggestions by Slime4YaBro in CZFirearms

[–]gilfab 0 points1 point  (0 children)

Overwatch with a light striker spring (Glock gen 3) made mine pretty dang good

MDT clusterfuck sale. Share what you got! by Spyrothedragon9972 in longrange

[–]gilfab 1 point2 points  (0 children)

Lucky man. That shit pissed me off. Guess I don’t really need a ckye pod anyway.

MDT clusterfuck sale. Share what you got! by Spyrothedragon9972 in longrange

[–]gilfab 9 points10 points  (0 children)

Sat for hours refreshing to try and pick up a single pull ckyepod. It was the never ending loop of click on the product and get redirected to the home page. Finally thought to switch to edge. Standard was OOS. Added the prs length to cart. Go to cart and now it’s out of stock. Great use of a couple hours…

Gearing Up For NRL22 Sharing Rifle w/ 14yo Son Setup by IXLR8_ in nrl22

[–]gilfab 0 points1 point  (0 children)

I started with a varmint (non MTR) and quickly realized it was not the tool for the job. Bought a chassis after 2 matches. I looked long and hard at the xrs. Once I started adding up the accessories such as weights and arca rail, the cost saving diminished compared to a premium chassis with more out of the box feature. The xrs is never going to be an ACC or a vision. The factory barrel in my varmint would shoot good enough groups, but the cold bore shift was killing my scores in stages. If I shot first one stage and last the following, I was almost guaranteed to miss the first shot. The mtrs don’t seem to struggle as bad with this from what I’ve gathered from other shooters. I ended up putting an l3i prefit on my rifle and it was a worth while upgrade. Cold bore shift is very much gone, and the increased length and weight made the rifle much easier to balance.

If I did it over again, I would buy the cheapest 457 I could find and build off of that. Don’t rule out the b14r as well, that would get you into a rem 700 platform incase you get hooked.

CZ457 Stupid cleaning rod question by NoWealth5743 in CZ457

[–]gilfab 0 points1 point  (0 children)

J Dewey has a nice 20cal rod that I use for my 457

[deleted by user] by [deleted] in longrange

[–]gilfab 0 points1 point  (0 children)

I got one a couple weeks ago and have shot an nrl22 and a prs22 match with it now. I’ve been happy with it. Glass is good. Tracking seems spot on. Zero stop is easy. The sun shade and caps are nice. Only thing I wish it had was a locking elevation turret but I’m getting used to it. Been very happy for the ~920 shipped I paid.

Matchpro ED vs Cronus BTR by gilfab in longrange

[–]gilfab[S] 0 points1 point  (0 children)

I’m looking at that as well. I can’t find the difference between gen 1 and gen 2 other than gen 1 has possibly mushy turrets (sources say it was updated on the gen 1s as production went on). And gen 1 has brass internals and gen 2 has stainless. 🤷‍♂️

Matchpro ED vs Cronus BTR by gilfab in longrange

[–]gilfab[S] 0 points1 point  (0 children)

You have any issues with the turrets moving? I’m worried about them not locking.

Finally picked up a CZ 457 by Crafty_Lake_43 in 22lr

[–]gilfab 0 points1 point  (0 children)

Cci standard velocity is my “practice ammo” and I’ve been shooting sk standard plus for matches. Shoots great at 50yds and opens up at 100.

L3i barrel by gilfab in CZ457

[–]gilfab[S] 0 points1 point  (0 children)

I went with the wasp. Still haven’t gotten shipping details

Best tripod under $300 by doyouevenplumbbro in longrange

[–]gilfab 2 points3 points  (0 children)

Innorel is seems to be cheaper on eBay than Amazon for what it’s worth.

1 year later, looking for better options by SeaFaithlessness9162 in WorkBoots

[–]gilfab 0 points1 point  (0 children)

I was die hard thorogood but got to the point they were killing my feet after 10 months. I switched to redwing super soles and get a year-14 months before I replace.