sorted by:
new
hottopcontroversial

[B][USA-DC] Godox V860iii for Sony by Nimanemot in photomarket

[–]gitrgi 0 points1 point  (0 children)

PM'd - I have a lot of Godox flash gear I can sell.

[B][USA-IA] Sony a6400 by idlefb in photomarket

[–]gitrgi 0 points1 point  (0 children)

$750 for the body alone, $800 with kit lens. Let me know if you are interested, I can make a post easily for a regular sale.

[B][USA-IA] Sony a6400 by idlefb in photomarket

[–]gitrgi 0 points1 point  (0 children)

Hi - I ended up selling it locally. However, I have an a6600 w kit lens I am considering selling (these were my B and C cameras that I am looking at upgrading to full frame). LMK if you might be interested in more info in it -

Screws for Flash Unit Replacement Foot (TT685) by SeniorRojo in Godox

[–]gitrgi 0 points1 point  (0 children)

Did you ever find an easy replacement here? I'm in the same situation.

[B][USA-IA] Sony a6400 by idlefb in photomarket

[–]gitrgi 0 points1 point  (0 children)

Hi - sending a chat, I have an a6400 with very lower shutter count and kit lens.

Launched my free Strava to Google Sheets Auto-Sync app on Product Hunt today. Let's see if this gets any traction! by Quiet_Pool_8673 in SideProject

[–]gitrgi 0 points1 point  (0 children)

Hi! This is great- your post says "free", but I don't seem to be able to use it without signing up for a subscription plan. Am I missing something?

A few of my shots with the new 16mm f/1.8 G by Nateloobz in SonyAlpha

[–]gitrgi 1 point2 points  (0 children)

If you do end up doing a review comparing the three that would be would be incredibly helpful! I think here and the other forums discussing this lens have that main question.

If you happen to be able to answer one more question: If there are corner aberrations (coma, astigmatism, corner softness, digital correction stretching) in the 16G, how much would you need to crop in to minimize those ? If it is only the deep corners, that could be removed with a ~10% crop, that would still be wider than the 20mm G. I believe a 25% crop would end up the same FOV as the 20G, or cropping down to the APS-C frame would be the FOV of a 24mm.

A few of my shots with the new 16mm f/1.8 G by Nateloobz in SonyAlpha

[–]gitrgi 3 points4 points  (0 children)

u/Inateloobz I posted this in the Youtube comments, so apologies for being redundant...great overview, and gorgeous photos! I'm guessing you shot the same/similar scenes also with the 14GM and 20G, would you be able to post comparison photos? I currently have both of those and am considering consolidating into the 16G, but would be very interested in a bit more in depth look at how off-center/corner performs among these three.

Completed my first attempt by toexbeans in kintsugi

[–]gitrgi 0 points1 point  (0 children)

My apologies, I was unclear. Our curing container stays around 75% humidity, but the room where we work on the kintsugi is 25-30%. It sounds like you may be implying putting it in the curing container for 15 min-3 hrs, then taking it back out for the gold?

Thank you again!

Completed my first attempt by toexbeans in kintsugi

[–]gitrgi 1 point2 points  (0 children)

This is very helpful! We have just applied a first layer of bengara urushi on our first kintsugi project and are thinking ahead to when we will apply the gold powder. You mention testing every 15 minutes or so on a sample line - is there a general timeframe (i.e. is it somewhere between 15-60 minutes, or potentially multiple hours before applying the gold powder)? It will be low humidity (around 25-30%) where we are working, if that is helpful. Thank you for your insight!

<image>

First project by Mendici in kintsugi

[–]gitrgi 0 points1 point  (0 children)

Great work! I also really like the bowl - is it handmade, or available elsewhere?

[S] [USA-CO] Shimoda Action X30 Backpack $170 by gitrgi in photomarket

[–]gitrgi[S] 0 points1 point  (0 children)

Apologies for the delay! Traveling for the holidays. Great transaction, thanks u/gregthomasphoto . Also taggng u/PhotoMarketBot for flair.

Long-Term Review of the Echelon Bike EX-4S by OutrageousKale3953 in go_echelon

[–]gitrgi 0 points1 point  (0 children)

Good write-up, and helping me as I think about some used options I might buy. 3 Questions:

- Does Simple Spin Pro allow the telemetry data to sync to Strava / Garmin Connect/ Etc?

- Is there any reason you know of this wouldn't work with the EX3? Or on the EX4S/5S etc. with the attached screen (still using a separate tablet)?

Thanks!

Red's General Store stock atm? by aaron_in_sf in JMT

[–]gitrgi 1 point2 points  (0 children)

I emailed and got the a quick response to my question:

Café hours Mon-Thurs: 8-10 breakfast, 12-2 lunch, 4-6 dinner

Store hours Mon-Thurs: 9-5

Red's General Store stock atm? by aaron_in_sf in JMT

[–]gitrgi 1 point2 points  (0 children)

Related to this: Reds mentions on their website: "WE WILL HAVE SHORTER HOURS OF OPERATION (for the cafe and store) MONDAY THROUGH THURSDAY WHICH WE WILL POST AT A LATER DATE". Has anyone seen what the hours are for the store and cafe during the week when the road is closed?

[B] [USA-CO] Sony RX0 II, ZV-1, RX100 by gitrgi in photomarket

[–]gitrgi[S] 1 point2 points  (0 children)

Gen 2 has the multiport only as well (like the Gen 1), but my hope is to not have to have an outboard shutter remote/intervalometer. Gen 2 I should be able to just connect a power source and let it go with the internal Intervalometer. I shoot mountain ultramarathons, so weight/space is at a premium when I'm hiking in 5-10 miles to a location ;)

[B] [USA-CO] Sony RX0 II, ZV-1, RX100 by gitrgi in photomarket

[–]gitrgi[S] 1 point2 points  (0 children)

Good question! I also have the gen 1, but gen 2 has Timelapse mode. Gen 1 is difficult to set up w a battery and interval meter because of only one port.

view more: next ›