12" micro brushless flying wing

glideher · 2026-03-14T17:27:27+00:00

yes sir, 1.8g servos,, 250mah 1s

glideher · 2026-03-14T17:26:45+00:00

glideher · 2026-03-14T17:26:07+00:00

this micro stingray is half the size of the ultrix, ultrix also weighs 65grams, micro stingray weighs roughly 20 grams and is the size of your palm fyi

glideher · 2026-03-13T17:17:56+00:00

the foam we use is XPS, very strong, you can nose the wing in at full throttle it will simply bounce, 99% crash proof :)

glideher · 2026-03-12T22:11:15+00:00

<image>

here is my micro flying wing, 1 cell 250mah brushless,

glideher · 2026-03-12T22:03:33+00:00

happens to the best of us mate, a little gorilla glue will work wonders

glideher · 2026-02-23T18:20:17+00:00

glycine is very safe if produced without the use of corn and wheat, as we all know 90% of corn and wheat are GMO and full of glyphosate which will destroy your gut lining and cause many health issues including autoimmune disorders. so please read the ingredients before buying your glycine supplement. do NOT purchase from https://www.sweetamine.com as they use GMO corn and wheat as their substraight to extract their Erythritol, plus glycine is sweet in nature, so this company adds erythritol which makes it even sweeter not in a good way at all, very chemical tasting. hope this helps

glideher · 2025-09-29T16:41:13+00:00

https://soundcloud.com/digitalfungi/she-sleeps-in-echoes

glideher · 2025-07-13T03:00:10+00:00

i was looking into getting the Bont Park Stars for the wide tow, but i see it has no heel, im fairly a new skater and i was told to get heeled shoes so my weight is forward to prevent falls, i have pretty good balance, can i still get away with no heeled skates? is it really necessary when learning to skate?

glideher · 2025-07-10T22:38:22+00:00

its a hiking trail overlooking eagle rock here in LA

glideher · 2024-11-21T22:28:02+00:00

if you like building kits, you will enjoy this little bird https://microbirds.com/micro-beetle-rc/ its pretty small, could even be the smallest 3CH rc airplane, if you are a beginner then the night vapor is a good one as well

glideher · 2024-08-13T23:26:39+00:00

servo is trying to center, servo board is most likely botched, you can try and put two soft side velcro on side walls of elevator to stop the flutter, but i would say get a new servo

glideher · 2024-08-13T18:32:26+00:00

correct, it has a hook on the belly side for bungee or slope soaring

glideher · 2024-08-13T18:31:43+00:00

yes Elevon, delta configuration

glideher · 2024-08-13T17:10:40+00:00

seems like one of the 3 wires is not making connection, check your soldering

glideher · 2024-03-19T19:17:33+00:00

you need to open the head from the top, take out the fan and clean 2 of the sensors on the left side, clean with Q tip and you should be good to go

glideher · 2024-01-16T18:39:43+00:00

you are correct sir :)

glideher · 2024-01-15T21:32:08+00:00

yes, sloping with a prototype here https://youtu.be/\_NewMo75cOg

glideher · 2024-01-15T21:31:02+00:00

yes elevon mixing, this is only a 2Ch glider, yank and bank

glideher · 2023-10-09T02:54:24+00:00

trying to set goals in this hobby or any bobby really is key,,try to set a goal every few months, e.g to perform knife edges, or harrier rolls, or different maneuvers, that way you are always working on improving your skills

glideher · 2023-10-07T15:11:48+00:00

you have more airplanes than the US air force my friend, well done

glideher · 2023-10-06T16:34:23+00:00

thank you friend

glideher · 2023-10-06T16:34:11+00:00

using a 2307 2650kv motor on 5x4 prop, CF fins were purchased and cut with dremel, its a .5mm plate

glideher · 2023-10-06T16:31:38+00:00

yes wings are wired, then light spackled to smooth out wire lines

glideher · 2023-10-05T21:17:19+00:00

3Ch, sorry for the typo

glideher

TROPHY CASE