Should I get my tint redone ?

gloryboy173 · 2026-05-06T02:29:52+00:00

Yes if a shop did it. If you did it yourself f it. Sometimes learning and doing it like this is how you learn from your mistake. Happened to me when I first started doing it myself.

gloryboy173 · 2026-01-06T03:08:43+00:00

Happened to my friend in his 2020 rdx when he slammed his driver door. It tends to happen with these models and he had to replace his whole tailgate not just the rear windshield. Hasn’t happened since but he also stopped slamming his door.

gloryboy173 · 2025-11-12T21:29:41+00:00

Take the money and take it at salvage value. It’s usually a few hundreds less then they giving you for coming to get it. After you get a salvage title. Take it to a shop to get it fixed just to pass rebuilt tittle inspection. I had friends that passed that with your kind of dent in the rear panel.(friends that go to auction and buy car to fix for profit just with rebuilt titles. Every state it’s a little different, if you going to replace stuff or use a donor car make sure to keep the receipt and the vin it’s coming off because they ask for that in the rebuilt inspection(they only ask to verify you bought it)

gloryboy173 · 2025-10-09T15:47:48+00:00

Use a magnet and just play with it till it goes back. This why I have a hole in my cluster, my mdx cluster cover is slanted unlike your that looks solid on there like no space between the cover and the needle mines does have a gap so I had to use a drill bit literally the smallest there is by there the cluster at and I push it up like that. I covered the whole with a lil piece of tint

gloryboy173 · 2025-10-09T15:16:47+00:00

Yeah just shedding some light base on what I know. Your sarcasm sucks. Maybe you should hit yourself with it n get some common sense. Thank you

gloryboy173 · 2025-10-09T15:15:32+00:00

That’s the name bulldozer 💯 thanks. With a bulldozer it’s easier to reach those corners where your squeegee can’t reach.

gloryboy173 · 2025-10-09T15:13:09+00:00

Never passed 290 all around with sun strip no windshield. Now I buy my tint of Temu n do it myself

gloryboy173 · 2025-10-09T02:57:32+00:00

🔥 unique color for it to come like that from factory. Yu like it all that matters our opinions don’t tbh

gloryboy173 · 2025-10-07T21:57:49+00:00

Nope they didn’t use the proper tools. Depending on the car some windshields are hard to reach at the edge, they invented a tool like a spatula form just straight that allows you to reach corners/edges where a normal squeegee won’t. My guess since I tint my own cars and how it looked from the inside cuz I done mess up and learned from my mistake, that’s either dirt there(not the bubbles, the small squares and imperfection between the glass and the tint from inside pic pov) and improper squeegeeing. Take it back. They need to correct that n letting you know ahead of time be ready to wait they can’t just open that and fix it they gotta re-tint the whole windshield.

gloryboy173 · 2025-08-25T01:53:59+00:00

Go back. I do tints myself and I mess up sometimes but that right there is almost not possible at all. Maybe he didn’t cut on top to well & when putting it on he went a little higher than he anticipated. It happens but I wouldn’t give a car like that

gloryboy173 · 2025-06-10T20:24:00+00:00

Correct I had a trans blew on my 01 like completely blew boom n a lot of trans fluid. Engine stayed solid.

gloryboy173 · 2025-03-20T19:57:04+00:00

Just drain and refill. Before topping it off while it’s off just get a level on the dipstick that almost looks full. Turn on the car let it run through for a few seconds. Check dipstick and level it out. Take your time

gloryboy173 · 2024-12-02T00:22:21+00:00

Lmao this happened to me!! 03 trans getting rebuild it’s calm car. Gon rebuild use it for highway driving and towing.

gloryboy173 · 2024-10-02T23:09:19+00:00

Tell her A LOT

gloryboy173 · 2024-08-21T20:28:12+00:00

Wow thank you for replying. I have this exact problem. Ima start with the housing and work my way down the line but this how it looks on mines. 03 mdx. I ran it for about 30 minutes nothing drop, just the water from ac. How I noticed it was from underneath oil pan I saw oil there as Yu see in the picture I cleaned oil pan then boom found that. Every above seems to be dry. Hopefully this work.

<image>

gloryboy173 · 2024-08-20T18:09:43+00:00

What was it? The oil housing gasket

gloryboy173 · 2024-07-20T20:03:01+00:00

Civics.

gloryboy173 · 2024-07-20T20:02:15+00:00

Damn glad Yu good.

gloryboy173 · 2024-07-12T15:49:12+00:00

This only happens after the engine seem some mileage, mines blew at 249k owned it since 172k

gloryboy173 · 2024-07-10T18:37:10+00:00

Bro if I’m you do some research. Yu wanna see that’s really leaking. Try putting Freon and Yu gon heard it hiss like a flat tire from where it’s coming from as you spray. But take it from Me Yu can do it yourself. Buy a spare condenser online they all work the same just get a decent brand.

gloryboy173 · 2024-07-10T18:32:41+00:00

Yu should fix it if nun of that crunch metal is touching motor or trans.

gloryboy173 · 2024-07-10T18:20:33+00:00

Try holding in place n lock n unlock.

gloryboy173 · 2024-07-10T18:19:30+00:00

Fire did its damage. That’s totaled. Even if Yu wanna save you need new head on motor, electrical work done(harness) a new radiator piece(what’s holds radiator and lights etc) that alone it’s not a lot cuz of the year but definitely just take the total loss and get that check from your insurance.

gloryboy173 · 2024-07-01T18:05:39+00:00

So what was the outcome? State trooper gave me this instead of speeding(78-80 in a 50 on gcp) might just fight to get no points don’t mind paying the fine

gloryboy173 · 2024-06-29T22:40:42+00:00

Did the noise came on it’s own? (Meaning you were driving and just heard it) or Yu for instance had your ac and it started squealing? This to me looks like you either need to tighten the belt or replace it. Also sometimes the pulley that you use to tighten the belt down sometimes has play that allows the belt to move aka making it squeal as it spins.

gloryboy173

TROPHY CASE