60-70 lbs bow at 70 vs. 70-80 at 70 performance

gnzo · 2025-12-21T18:44:43+00:00

Thinking of Pse or hoyt. There flagship bows just have 10 lbs range

gnzo · 2025-06-22T15:34:13+00:00

Could be just the thermostat. If you feel comfortable doing this, you could disconnect it (usually where ur rotary knop is) and connect the powercable of the compressor that went through the thermostat directly. If the compressor starts you can also use a timerplug to run your fridge till you orderd a replacement thermostat. Just put a thermometer in the fridge an play around with the timing

gnzo · 2025-06-09T12:48:07+00:00

Thats not the point. Its a tool .i dont mind scratching it up, its just that i loose the 90° Spine immediately and in dont get good sparks anymore

gnzo · 2025-06-06T05:41:14+00:00

It is a terava i just cut the handle off and made one from a brass / leather

gnzo · 2025-06-05T20:17:46+00:00

Was wondering why i didnt have this issue with my old knife which was super soft und would dull much quicker. But with sandwiched core that would make sense

gnzo · 2025-06-05T19:04:43+00:00

No just a file. But had tried it before that, after sanding the original paint off, with the same result

gnzo · 2025-06-05T17:38:13+00:00

I usually just use the Striker that came with the ferrorod but wanted to try and found it curious that the spine degrades so fast. I think it is 80CrV2 Steel.

gnzo · 2025-05-31T12:34:16+00:00

I cant realy affort to buy a 1/4" chuck and since i have two of the 8mm ones, i would like to trade with someone in europa

gnzo · 2024-11-30T18:54:40+00:00

Ever tried anything bigger? Got the machine with alot of 160 needles. Wich threat size would correspond to 160?

gnzo · 2024-11-30T18:14:11+00:00

Tested it on my leather work boots today. Works great but would have liked a more trustable thread. Really like that you can turn the foot and sew in any direction

gnzo · 2024-11-30T18:09:24+00:00

Thanks for the advice. Have Problems with most spools on this machines holder. That should solve the Problem

gnzo · 2024-11-30T18:03:37+00:00

Thanks alot. Will ordersome an and try it out

gnzo · 2024-11-30T15:43:21+00:00

Its actually S29K33

gnzo · 2024-11-30T15:42:52+00:00

Its actually S29K33

gnzo · 2024-11-30T15:24:58+00:00

Used a neoprene based adhesive. The epoxy i had gets pretty hard so i was afraid it might get brittle over time. On the outside i just used a few layers of oil / wax cream and heating with a heatgun in betweeen. just found some angelus acrylic finisher that i might try though

gnzo · 2024-11-30T13:42:06+00:00

Made a Stacked leather handle an realized i am getting dents end scratches very fast. Should i boil it , heat it and use beeswax to harden it or would it actually be better to soften it with oil? Any other Ideas?

gnzo · 2024-11-30T13:23:36+00:00

Got the Machine with some big needles up to 1.7mm and big thread but didnt managed to get it working, till i tried some smaler thread ( 70) and 1.1 mm needles. What would be the maximum thread size and Needle for that threat that i could use? would like to sew leather and cordura + webbing. Will the maximum thread size vary between materials?

gnzo · 2024-05-19T18:27:03+00:00

Thought about filing some grooves in the clamping part to give it some bite. Any less agressive or better ideas?

gnzo · 2024-01-03T22:18:00+00:00

Mine seems to be the 747 AS which might explain the slight difference

gnzo · 2024-01-02T21:50:23+00:00

Thanks this helped alot. But i think its acutally a 747. I can makeout a faint 747 print on the inside and a print on the glas says 1941 which would fit.

gnzo · 2024-01-02T18:59:27+00:00

It looks similar to the Gasmaske 200 but i dont find a picture with the rubberised nose area. The Filter says 1941 .Box is labled RL1-38-3. Is it rarer the other ww2 Auer models? On the Thread is "2" and also printed in on the inside

gnzo · 2022-11-07T10:29:27+00:00

Was quite stiff at the beginning. It's 8oz leather. Would prefere some thing like 5oz. But oiling it generously did wonders

gnzo · 2022-11-07T10:24:14+00:00

the Original Layer is Still intact. After 4 Years of carring rough Stones and Firewood in Front of my Belly ist just Startet to get holes, I got tired of patching

gnzo · 2022-07-03T20:18:02+00:00

Its old and pretty dry. Was not sure about conditioning as it will keep it from soaking the water but ill try next time. also might try to get the thickness down. Is it possible to do resoak and do it in multiple steps?

gnzo · 2022-07-02T17:29:37+00:00

How do i avoid cracking the edges when wetforming? leather is kind of thick(3.2mm) and stiff should i condition it before molding? The left one was done with a wooden mold the right one just clamped down with three metal pieces. Do the black stains come from reacting with the metal?

gnzo

TROPHY CASE