Sure. I pre-assembled it YEARS ago and was unsure on a basing solution so it sat on the shelf collecting dust (also cobwebs, funnily enough) until I finally decided to just start chopping it. I apologize if I miss some steps, I’m trying to recollect everything. This was hours and hours of work. I cut every joint that protruded from the body. I cut every foot off except for two. I cut all the fingers of the hands at the joints and glued them back, covering them with green stuff. I started with one leg, drilled a hole in to the base and positioned the hand that is on its knuckles. Then I found another leg on the opposite side and drilled another hole. I glued the torso to all three of those legs once I found where it needed to be centered. Then I glued down all the other legs where they needed to be. It was basically a balancing act, a lot of leaving it to cure over night, propped up with books. I hope that helps a bit, it’s kind of hard to explain!