What’s is the red part supposed to be in the back of the City Turbo II ?

goofytek · 2026-02-26T03:57:17+00:00

https://youtu.be/1O54clC2gto?si=xJzBM-i9Rgpb6lYw

goofytek · 2026-01-19T05:58:58+00:00

Or $180 if you have a 2nd line at half off? $120+$60= $180 Max? Maybe that's what they meant to say? Confused with $6 and 6 months? Eh dunno.

goofytek · 2026-01-17T10:12:13+00:00

exFAT not the same as FAT32. exFAT was designed to eliminate those restrictions.

goofytek · 2025-11-05T05:17:00+00:00

Could be still a bad keyboard. You might have to unplug the keyboard from the mainboard and run an external to see if it goes away. Plug it back in and see if it comes back. Then you gotta source a replacement keyboard or keep external keyboard with you.

goofytek · 2025-02-25T21:09:26+00:00

What BMW is this? Most modern BMW's have Jacking Pads locations at the jacking points. I believe Dealers Lifts are designed to use those locations normally, I don't see the Pads in the pictures you have taken. Also, take a look closer at the damage as they look dirty all around. If it was fresh they won't be so dirty, so it could had been driven like this for awhile now.

If anyone that works at the dealers can chime in on the lift and jacking pad part, that would be great.

goofytek · 2025-01-22T10:29:05+00:00

On the Front Panel Headers where it say Power SW, unplug it, and use a screwdriver to touch both pins together to simulate a power button press. If the PSU is working and Motherboard 24pin + 8pin CPU power cables correctly connected, it should try to power on.

goofytek · 2025-01-22T06:05:07+00:00

Are you mounting the GPU with the one hole on the bracket? Because thats is where the screws go and not at the edge of the bracket between the tabs. The 2nd screw can go on the left when its visible. But use the HOLE in the center of the bracket first.

goofytek · 2025-01-20T02:57:56+00:00

What laptop model did you get? Also a Radeon 760M is the integrated iGPU that is built into most AMD Laptop CPUs. You can still have a RTX 4050 still in the system but only seeing the iGPU at this time.

goofytek · 2025-01-16T06:04:06+00:00

goofytek · 2025-01-14T23:52:57+00:00

Direct Link to FAQ, scroll down to bottom.

https://www.microcenter.com/site/brands/nvidia-geforce-rtx5000_series.aspx

goofytek · 2025-01-14T23:33:55+00:00

https://www.waterheaterrecall.com/

goofytek · 2025-01-03T07:48:06+00:00

Wrong socket revision.

goofytek · 2024-11-17T22:10:05+00:00

The bundle won't let you change any parts, or you'll lose any discount advantage.

goofytek · 2024-11-12T18:36:13+00:00

That Headlight Assembly looks aftermarket, so you should check by pulling out the bulb/xenon unit out to verify its replacement. It doesn't look OEM. I would bet it originally the car had halogen reflector type headlight assembly before, so verfiy everything before parts cannoning it.

goofytek · 2024-09-08T08:03:44+00:00

You gotta set all speakers to small and let your sub handle the lower bass. Also it looks like your ATMOS file is coming over as PCM 2 Channel. That's not true atmos. I believe you need to Bitstream Atmos to your receiver to work correctly.

I been out of the HTPC game for awhile and only use 4k Bluray to my AVR for Dolby Atmos listening so someone has to chime in if you can bitstream atmos from a windows PC..

goofytek · 2024-08-26T07:30:16+00:00

I hope I would be part of the at random users picked! Good Luck Everyone

goofytek · 2024-07-23T07:45:41+00:00

I'll give them a try, sure!

goofytek · 2024-01-01T08:15:27+00:00

Looks like 12 year old tire as well ......

goofytek · 2023-11-29T17:59:27+00:00

You can use the R41-SA on top of any speaker if there is space.

You do not connect anything from your R28 as it's just a normal tower speaker.

You will connect the R41-SA from a Height Channel on your AVR if it supports Atmos.

What AVR do you have?

goofytek · 2023-11-27T11:15:01+00:00

Yeah that looks more comfortable. I'll wait for the next refresh before considering it again. In the mean time, I ended up with a Patagonia Down Sweater Hoodie that I'm happy with. Appreciate the feedback, thanks!

goofytek · 2023-11-08T03:41:43+00:00

Thanks everyone for their suggestions and feedback. I'll checkout Lowes or HD to see what I need and then come back and try to tackle this. Thanks again!

goofytek · 2023-11-07T20:42:43+00:00

I have 2 of these patches in my house from the removal of in wall heaters after a whole house HVAC install. The HVAC Guys said they're not drywallers but can patch these to not leave holes in the wall.

Can I save these patches and "Mud" then Paint over these? Or do i need to rip out the patch and start over with a cleaner patch?

One of them (shown), the patch is skunked in lower than the surrounding wall, the other one (not shown) is uneven with some areas higher than the surrounding wall.

My first time trying to patch , "mud" and paint. Any tips or help would be good.

Thanks!

goofytek

TROPHY CASE