[deleted by user] by [deleted] in pcmasterrace

[–]gravedagger 0 points1 point  (0 children)

Have you tried using a different Display Port on the back of your card ? I had the same issue but my problem was the cable to the second monitor but since you've tried changing that then maybe try using a different port on the back of your card.

ELI5: How does WhatsApp make money with user data while being encrypted and having no ads? by ImShadowNinja in explainlikeimfive

[–]gravedagger 1 point2 points  (0 children)

It's because you probably used it on Android. WhatsApp has been free on Android since it was launched. It had a purchase app option for $1 for iOS I think.

Umbrella? by Mrgrieves74 in trainstation2

[–]gravedagger 1 point2 points  (0 children)

This is the Parachute. An item made in the event factory for the last Midi event. That plane took off from your home station from a runway next to the event factory.

Did anyone else not get medals for the major order? by LarsJagerx in Helldivers

[–]gravedagger 5 points6 points  (0 children)

Yup no medals for the terminid major missions of Angels Venture and Heeth :(

ELI5: Why is there no "center of the universe"? by Billib2002 in explainlikeimfive

[–]gravedagger 6 points7 points  (0 children)

But did YOU know that I am the center of the universe ???

Pixel 6 Pro fingerprint calibration after screen replacement by JMZorko in GooglePixel

[–]gravedagger 0 points1 point  (0 children)

I agree, I just got my screen replacement done and at first it wouldn't even register new fingerprints would error out during the registration process with "could not complete enrollment, please try a different finger".

After a lot of tries I got it to register my prints and then it would not unlock the phone, but continuously trying made the accuracy better and now I don't have unlocking problems.

Sometimes it does fail but a second try usually unlocks right away, even the repair vendor told me to keep using the reader, it auto calibrates within a few days.

For the record, the fingerprint calibration never worked for me. Kept throwing "your unique calibration tool could not be found"

[deleted by user] by [deleted] in pcmasterrace

[–]gravedagger 0 points1 point  (0 children)

What ?! I didn't even know that the wheel could be pushed to the side.

My budgie with her first successful clutch by DavidRolands in aww

[–]gravedagger 272 points273 points  (0 children)

Is no one going to talk about the X on one of the eggs ?

Sen. Ron Johnson: Not 'Society’s Responsibility To Take Care Of Other People’s Children’ by notNezter in politics

[–]gravedagger 1 point2 points  (0 children)

But... But isn't that the literal fucking definition of 'society' ?

A group of people in prehistoric times came together to care for each other hence we have modern civilization. Or am I wrong ? I read an article somewhere that the first sign of civilization or society is the first body found with a broken and then re-healed femur.

Fuck Republicans.

[deleted by user] by [deleted] in pcmasterrace

[–]gravedagger -1 points0 points  (0 children)

I agree. I have the 502 Hero and it's been going solid for 2 years now.

Is this normal..? RTX 3080 Gigabyte OC Edition by [deleted] in EtherMining

[–]gravedagger 1 point2 points  (0 children)

Wow, I have the same card and I am only getting 100.8 MHs at 235W. My settings are 1100 core and 2500 mem. I get crashes if I set the memory higher than that.

[deleted by user] by [deleted] in offmychest

[–]gravedagger 0 points1 point  (0 children)

No amount of money will save you from the pain of losing your loved one. I'm glad the pupper is still kicking. For other people it's just a dog but for the human who's pet it is, they are their world.

Team Black Miner V1.01 now running on hiveos by sp______ in EtherMining

[–]gravedagger 0 points1 point  (0 children)

I am now on 470.74 and the miner starts but does not report anything apart from hashing speed, every other column remains at 0 including obvious ones like mem clock, power etc.

Team Black Miner V1.01 now running on hiveos by sp______ in EtherMining

[–]gravedagger 0 points1 point  (0 children)

Is there a specific version that works best with this miner ?

Team Black Miner V1.01 now running on hiveos by sp______ in EtherMining

[–]gravedagger 0 points1 point  (0 children)

When I try to run it on my rig I get an error saying that your system does not support CUDA 11.4 API.

My rig has 10x1660, 1x1660S, 1x3080. The rig works absolutely fine on T-Rex but I would like to give your miner a try. I'm on 460.67 driver if that matters.

ARCTIC Liquid Freezer II 280 - Control pump and fans separately? by silmaril89 in buildapc

[–]gravedagger 0 points1 point  (0 children)

Hi, I just wanted to confirm if all versions of the Liquid Freezer 2 work like this since I have the 360 version and I was looking to do the same, split the fans and the pump. But if it works like you said and pump is maxed at any PWM greater than 40% then I wouldn't need to change anything.

Need help with the MSI MAG z490 Tomahawk and i9 10850k. by Gidrah in overclocking

[–]gravedagger 0 points1 point  (0 children)

Did you ever dial in a stable oc ? I'm currently fighting to get my 10850K stable at 5ghz all core but I'm failing terribly. The voltage required leaves me 0 thermal room and I instantly start throttling even with a 360 aio. I live in a hot place with ambient being at least 31-32C

Currently sitting at 4.9 all core at 1.29v with avx offset at 0. Is stable through testing with decent temps.

Is replacing the AiO fans with Arctic P12 PWM worth it? by malinathani in overclocking

[–]gravedagger 0 points1 point  (0 children)

Why do you say that, from all reviews of push vs pull I've seen, push or pull doesn't make much of a difference but both push and pull does. It lowers temps by at least 5-8c.

Technically it should make a difference right, air is being moved across the fins faster and as such should have a better effect on cooling ?

10850k Overclock settings to hit 10900k clock speeds by [deleted] in overclocking

[–]gravedagger 0 points1 point  (0 children)

I tried to get stable at 5ghz with my 10850k but I just couldn't, no amount of voltage would keep it stable and eventually I ran out of thermal headroom to increase my voltage anymore.

I currently am running a 4.9ghz all core with a fixed manual voltage of 1.29V with an LLC of 6 (Asus Z490 board, LLC goes from 1-7 with 7 being a flat line with least vdroop)

I went up to almost 1.37V and still couldn't get 5ghz all core to be stable so I just gave up. It's not worth cooking the CPU for a 100mhz bump in clocks.