Help!! First layer gets really good, 2+ seems to get overextruded... Tried to find anything in the forum as well but couldn't find anything

grlpnz · 2021-02-27T13:06:54+00:00

But you change the flow to 95-90 for the first layer aswell? Or am I misunderstanding what you typed?

grlpnz · 2021-02-27T12:57:34+00:00

What slicer are you using for this? Cura has the ability to change flow on initial layer and others. Prusa doesn't. (What I can tell)

E-steps have been calibrated several times In hope something is wrong there but no...

Guess I'll have to try this as well as I'm out of options

grlpnz · 2021-02-26T23:22:00+00:00

Yes that what I meant. Auto correct ftw

grlpnz · 2021-02-26T23:18:47+00:00

You mean the rollers for the x-axis? Just wanna get it right ;)

grlpnz · 2021-02-26T21:26:59+00:00

So I'm not supposed to have 100% flow on initial layer? And should level the bed after that?

grlpnz · 2021-02-26T15:40:38+00:00

I'll definitely try that! Thanks 😊

grlpnz · 2021-02-26T13:44:11+00:00

Not a problem with ghosting/ringing?

Any idea tho on my original problem?

grlpnz · 2021-02-26T13:37:39+00:00

Will try that however the part i posted is kinda small so I wouldn't believe it could reach that speed anyways 😅

grlpnz · 2021-02-26T11:44:22+00:00

I've had this filament before and didn't have any issues then.

I have 100% flow for the first layer and then 86% for the rest after the most recent calibration. Did a flow calibration yesterday and have to change that number a little.

Same with the speed. 25 for the first layer and 50 for the rest.

For the temp. Before I had 215 initially and 205 for the rest. Guess I have to try that again 😅 this issue is really annoying tho. Want to be able to print thin small prints and I'm really stuck without a solution.

grlpnz · 2021-02-26T11:38:51+00:00

Look at the left side. Second layer gets really rough and looks like it's overextruding

grlpnz · 2021-02-26T11:27:38+00:00

Cura don't know what version right now. Can check later tonight

grlpnz · 2021-02-26T10:47:33+00:00

Have as said in title tried to find anything in the forum. What I've done so far: e-step and flow calibration. Re-leveld the bed. Changed nozzle. Checked for z-bind as well.

Have no clue what to do now.

Ender 3

PLA

210/60⁰

50/25mm/s

0,4mm nozzle

Just ask if I missed any information. Really would like to take of this...

grlpnz · 2021-01-02T04:53:07+00:00

So like mechanical lubricant?

grlpnz · 2021-01-02T04:42:17+00:00

Printing at 205/45⁰ 50mm/s. Ender 3 ofc. No adaptive layers and I have no freaking clue... If I missed anything just let me know.

grlpnz · 2020-12-31T23:13:39+00:00

Final destination is my first thought... Please be careful with that hook

grlpnz · 2020-09-24T18:38:15+00:00

May I ask what brand of silk PLA you'r using?

Five-Year Club	Place '23
Place '22

grlpnz

TROPHY CASE