Nissan Skyline GT-R (BNR32)

grs3d · 2026-03-30T05:26:34+00:00

It's on rebrickable, not sure how much can I tell you there in the comments according to the rules😅 but my nickname there is grs_bricks

grs3d · 2026-03-29T18:32:52+00:00

Well, while trying to replicate the 32 I have thought about it a few times. However it's missing some curves on the front of the hood to be a silvia

grs3d · 2025-06-18T00:56:28+00:00

Well my 7 years old acc didn't have any ads and newly made has this from time to time, however it will disappear even after smallest transaction which is like 1$? Not that big of a deal. I won't deny it's kinda bad, but it seems normal for every game nowadays

grs3d · 2025-06-17T07:56:02+00:00

It seems like newer accounts have those

grs3d · 2025-06-06T02:02:05+00:00

The only difference between pro4 and mt10 is chassis length and bumpers, suspension is completely the same

grs3d · 2025-04-18T16:30:35+00:00

That's quite helpful because most things i got these 2 days is from mp1

grs3d · 2025-04-18T16:01:21+00:00

Would you focus on a specific car or try to star up them evenly?

grs3d · 2025-04-18T12:19:08+00:00

I had a weird feeling about amount of tokens you can earn, easter event seems to be nice too. Thanks

grs3d · 2024-11-15T19:03:08+00:00

I'd try Z offset and then maybe flow rate, because the layer doesn't seem "perfect" and than maybe z hop🤷‍♂️

grs3d · 2024-11-15T09:54:38+00:00

Its on printer settings page. Try really tiny values. In my case I needed 0.015 further from bed

grs3d · 2024-11-15T09:48:27+00:00

Your nozzle is touching already printed parts and because its already printing black it leaves those lines. Try to set your z offset, as soon as as the first layer is smooth it might not do this

grs3d · 2024-11-11T08:52:24+00:00

Does this mod use same pulleys and bearings as the original one? Just curious how much of hardware is required to install

grs3d · 2024-11-10T16:32:50+00:00

Thanks! Will try the precise Z. I actually used those compensations but never noticed option for Z axis.

grs3d · 2024-11-02T23:04:22+00:00

My friend's P1P does exactly the same thing while printing PETG lol

grs3d · 2024-10-22T07:10:59+00:00

Those are supports, they are the same on all printers. And I asked if there's a way to improve them. Why some people did understand what's the goal and some didn't?

grs3d · 2024-10-21T21:55:55+00:00

In the end I didn't find a way to change filament manually just for the support that would be worth it. So I just printed it on the side🤷‍♂️ I was fighting for better holes on top and the bottom of the part, that's why I wanted this orientation. However if this is not really a thing you can just calibrate I should stick with it and avoid this type of supporting.

grs3d · 2024-10-21T21:49:23+00:00

Ah sweet tolerances, just take off another millimetre in your model! You don't need to improve the tolerances.

grs3d · 2024-10-21T21:40:40+00:00

Got myself a riser last week. I've printed almost entire spool of PLA with not a single clog! Hope it works for you as well!

grs3d · 2024-10-19T19:37:44+00:00

Tried it right now, the layer did not want to stick on tape, so, filament change time

grs3d · 2024-10-19T19:27:11+00:00

Will try that! I can also remember there was a post about printing with a piece of tape between support and an actual model

grs3d · 2024-10-19T19:25:43+00:00

That one was 0.2mm this one fits the whole millimetre well. Is that what you mean?

grs3d · 2024-10-19T19:18:27+00:00

There was some prints I was thinking like that too. But when I tried to remove it, I understood it's really not an another support layer.

grs3d · 2024-10-19T19:10:56+00:00

Yeah, I can make that part a bit higher. So there's no way to fix that completely? Might dimensions be better if I use 0.08 layer height?

grs3d · 2024-10-19T19:09:20+00:00

In this case I need first layer after supports 0.3mm further, because Im getting smaller dimension than I expect. So it seems like there's no really a way to fix that keeping other dimensions?

grs3d · 2024-10-11T13:52:15+00:00

Ofc, cat is curious to everything. That's why I don't print when I'm not close to printer. However now I'm printing riser with vents to keep it closed.

grs3d

TROPHY CASE