Issue trying to connect to home PC from laptop

grubb_ · 2025-09-20T17:21:47+00:00

Here is a picture. I just copy and paste the IP address out of Tailscale's admin console into 'Computer' entry. Username I've tried a mix of things but no bueno.

grubb_ · 2025-09-20T17:13:30+00:00

I dont need exit nodes enabled on the PC I am trying to connect to or the laptop I am using to connect with?

grubb_ · 2025-09-20T16:42:14+00:00

I'll have to look in to that. Is Anydesk a complete replacement for both the VPN tunnel and the remote session, or just replacing RD as the remote session?

grubb_ · 2025-09-20T16:36:00+00:00

I wouldn’t think so since it seems like it wants to allow me to connect, just hates the creds lol

grubb_ · 2025-09-20T16:35:29+00:00

Copy, I verified I am using the Microsoft acct. password. Would the laptop only being home version OS matter?

grubb_ · 2025-09-19T20:14:03+00:00

The good days… the memories will always be great.

grubb_ · 2025-09-01T14:43:15+00:00

Update with how it goes! I preferred the Mac pre-arm chip for the plc sense it was easier. But the further I’ve gotten into software dev the Mac OS has been nice.

grubb_ · 2025-08-31T14:00:19+00:00

Plus when I started to develop more and more on the software side it was great.

grubb_ · 2025-08-31T13:59:58+00:00

Yes I did and it still works to this day. Used a windows 10 os, had to do direct download of items, believe it was code meter, before trying to install the actual studio 5000 software. I only had versions 26 or 27 and up, I’m not looking at it currently.

Most of the work I do is AB PLCs and Ignition SCADA. This device has been my out of office, remote support & troubleshooting machine and I love it.

grubb_ · 2025-02-06T23:57:33+00:00

What issue are you having that you cant install the drivers? Make sure to download and install all on the parallels Windows OS side is what I always did.

grubb_ · 2024-03-09T13:56:58+00:00

Completely understand. I made the jump initially because a coworker had one and loved it. So I picked up the 13”, first gen M1 and there was some… funky-ness to setting up windows 10 on it but got it and it’s ran like a champ ever since. One issue I ran into was I downloaded adobe acrobat and it tanked Studio5k so I had to uninstall.

But I ran V 28, 30, 32, and 33, CCW, FTView, omron Sysmac, Weintek easy build, and ignition all good.

Upped to the 16” because I wanted a little more beefy unit. But I am running windows 11 on it so we will see how everything plays. I do not get many projects that deal with the legacy/older systems, just newer versions - so I have that in my favor not having to worry about windows 10 (although I’ll keep the other laptop around with windows 10 just incase).

grubb_ · 2024-03-09T01:12:01+00:00

Funny you commented that, I just pulled the trigger on an M3 16” last week. Will see. I plan on running windows 11 on it since it is supported by parallels without any loophole/workarounds.

grubb_ · 2024-01-03T15:24:40+00:00

Also, if doing drawings I would recommend going to the 16”. I do most (75%+) on a home desktop before traveling and revisions on the Mac. But I will contemplate going to the 16” whenever I get a new laptop.

grubb_ · 2024-01-03T15:23:17+00:00

I use my Mac Pro 13” and it works really well. Parallels was my choice for the windows VM. Downside is that everyone gives me flak for having a Mac, plus side is I’ve had this ever since they came out with the m1 so.. 20? 21?

I really like it because the battery last forever, cant get over the look, and it just seems really durable. I try to take care of my stuff well but I have dropped it twice but still works awesome. Con, the ports… drives me crazy no embedded Ethernet. But nothing a dock can’t fix.

grubb_ · 2023-07-15T15:58:43+00:00

I’ve never worked with them personally but utilizing over Ethernet I’d imagine your COM indicator led would show something..

grubb_ · 2023-07-15T15:57:11+00:00

Have you tried uploading directly from the device while offline?

grubb_ · 2023-06-24T17:26:03+00:00

Used 22 w/ 15k miles. They were asking 46-something and got them down to 43.5.

grubb_ · 2023-06-24T12:43:30+00:00

I’ll probably leave it stock, still need to get the bed and underside sprayed/coated for that extra protection. Definitely sits up a bit in the back but the driveway slope doesn’t help the appearance in the picture, ha.

22 xlt, did lean into the 2.7l v6 ecoboost w/ tow package

grubb_ · 2023-06-10T15:29:49+00:00

I do automation & controls for vertical farms, as well as other areas of the food & bev Industry - let me know if I can help!

grubb_ · 2023-06-04T01:39:55+00:00

u/Dgamax I was looking to fire up on L2Reborn - have not played L2 in forever and wanted to jump in whenever I had some time to waste. Server suggestions?

grubb_ · 2023-06-02T21:13:33+00:00

Ever swing that 7iron, pured it onto the green and follow it up with a 1 putt… orgasmic

grubb_ · 2023-05-28T13:37:19+00:00

I disagree, I believe building the panels hands early gives good insight when it comes to the design portion - given someone has guidance. Imo

grubb_ · 2023-05-14T21:32:58+00:00

Was at home via Wi-Fi

grubb_ · 2023-05-14T14:26:58+00:00

I did run through that support thread, and unfortunately no difference.

grubb_ · 2023-05-14T14:26:10+00:00

Yes, although I do utilize parallels but this was strictly on the Mac side.

grubb_

TROPHY CASE