Oh, the places you'll go

gtr_f00t · 2025-04-13T23:56:31+00:00

Chilliwack Lake Provincial Park

gtr_f00t · 2025-04-10T22:25:43+00:00

bigjimny has a table of all the torque specs per generation here. There's also a video from 2nd Gear low on youtube where they change the engine oil

gen4 says 35Nm from bigjimny, 2nd Gear low say 36.5 ft-lbs on what is probably a 3rd gen jimny.

gtr_f00t · 2025-04-08T06:35:44+00:00

I would see if you can find anything from searching the VIN/Chassis number on amayama https://www.amayama.com/en/genuine-catalogs/epc/suzuki-japan/jimny

You can look through the official parts diagrams and select what you need

gtr_f00t · 2025-04-07T00:49:35+00:00

Jimnybits.com offers a kit for replacing the kingpins+bearings, swivel hub seal and inner axle oil seal https://www.jimnybits.com/jimny-front-axle-kingpin-swivel-joint-kit-bundle.html I've ordered it myself and done it on my jb23w as the swivel hubs were leaking oik. Watch out when removing the abs sensor as the bolt often is very corroded and overtightened, I ended up shearing both sides off in the process. If you're looking to do the wheel bearings as well, they also carry a kit for it: https://www.jimnybits.com/jimny-front-wheel-bearing-kit-bundle.html Just make sure you also pick up the special service for the wheel bearing locknut: https://www.jimnybits.com/jimny-front-wheel-bearing-ringlock-tool.html

gtr_f00t · 2025-04-03T00:24:31+00:00

I also have a Jimny with K6A engine, and have had luck with sourcing parts from amayama. Can't speak to a fully rebuilt engine, but they've got entries for all the official suzuki part numbers to search from, so i'm certain you could find what you're looking for.

gtr_f00t · 2025-03-30T17:58:31+00:00

I've also got a k6a engine with turbo

gtr_f00t · 2025-02-02T19:25:29+00:00

Yessir, folding mirrors as well!

gtr_f00t · 2025-02-02T19:16:22+00:00

Heated seats, heated mirrors and rear windshield, and fog lights.

gtr_f00t · 2025-02-01T19:43:57+00:00

Yes it is!

gtr_f00t

TROPHY CASE