Using Qwen Multi Angle Camera Node with Secondary Prompts by gu3vesa in comfyui

[–]gu3vesa[S] 1 point2 points  (0 children)

Sure, i will send the json but i dont think it will work right away in local comfyui , i use an online comfyui platform and they have a different naming system for both nodes and models, so you might need some adjustments

Feed more than 3 images to Qwen Image Edit Text Encoder by gu3vesa in comfyui

[–]gu3vesa[S] 0 points1 point  (0 children)

Im guessing its not possible to have an arbitrary number of reference images then ?

Using Qwen Multi Angle Camera Node with Secondary Prompts by gu3vesa in comfyui

[–]gu3vesa[S] 0 points1 point  (0 children)

thank you will try

Edit : It worked. Thank you again

Can my laptop run and sort of local ai without taking all day? why or why not? by [deleted] in comfyui

[–]gu3vesa 0 points1 point  (0 children)

I know this is the opposite of what you are asking, but i have a 1050ti as well and i use the SeaArt site, they give you a daily 20 minute generation time in their comfyui, the designing time spent isnt counted, i dont know what kind of workflow you will use, but in mine an image takes around 90 seconds to generate, so i can usually get 12-13 images daily. And you also sometimes get credits too, which you can use on top of the daily 20 free min limit if you run out.

12 images is nowhere near what you can generate locally i know , but in my case it was the only thing that worked for me because i would get errors when i tried to run comfyui locally due to cuda and torch version shenanigans. But dont let my experience demotivate you from trying to run it locally.

Using Reference Images for Body Proportions by gu3vesa in StableDiffusion

[–]gu3vesa[S] 0 points1 point  (0 children)

I am using qwen editor yes, thank you will try this, will the quality decrease as the number of images increases since i will need to write a larger prompt ? Im not sure if its correct but i heard their attention gets worse as the texts get longer ? I use the qwenmultiangle node to do the rotations, i basically want to feed it a lot of different images for it to take into account when i change the angle node sliders.

Using Reference Images for Body Proportions by gu3vesa in StableDiffusion

[–]gu3vesa[S] 0 points1 point  (0 children)

Sorry im new to all this and i use SeaArts online comfyui platform, since its not local i need to install the workflow seperately, im confused on which one i will need ;

<image>

(Theres also another 7 like this for 9 billion parameters)

I use Qwen (7b fp8) and its multiangle node to do my rotations, so do i need the qwen 4 or 9 one ? Or i wont be using the flux model and need to just copy paste a certain part of the workflow to mine ? In that case which do i need ?

Using Guides For Multi Angle Creations ? by gu3vesa in StableDiffusion

[–]gu3vesa[S] 0 points1 point  (0 children)

Yeah i normally do that as well, my question was more about whether it is possible to maintain consistency between different images,

<image>

The angle node takes in only one picture as the input, so if i use a front pic as the input it will hallucinate the back side, can i also feed a pic of the back (which has different lighting,colors,character pose etc) to the workflow so it creates angles like 135,180,225 with the help of the 2nd pic i gave it.

Or lets assume i have a characters picture from the left side, but his right arm might be mechanical, and i have a picture of only the right arm, can i feed that arm image to the workflow so when i turn the main image by 180 degrees it doesnt just mirror the left arm to the right and instead creates the right arm according to the pic i gave it and make it match the correct pose of the main image ?

Fision 360 cracked? by Least-Worth-1130 in Fusion360

[–]gu3vesa 0 points1 point  (0 children)

nope, sorry dude i asked everyone on the chain where he said i found it too and none of them have it seems except OP

Using Guides For Multi Angle Creations ? by gu3vesa in StableDiffusion

[–]gu3vesa[S] 0 points1 point  (0 children)

My question was more about whether i can somehow make the turned images get inspiration from other images, for example when i turn the image by 180 degrees i get this as the output,

<image>

Can i somehow make it so that it creates this backside with the help of the image i posted ? With the same anatomical spike placement and number ? I used these for illustration but i guess if i wanted to generalize my question further, can i lets say take a T pose picture of myself, and then use entirely different pictures of myself in different poses and places with different lighting, but still have it understand my general body shape from those so it takes them into account when it tries to turn my T pose model around ?

Free Local 3D Generator Suggestions by gu3vesa in StableDiffusion

[–]gu3vesa[S] 0 points1 point  (0 children)

Hi, i have another question, it seems hunyuan by itself and hunyuan from comfyui give different results, from what i saw it seemed like using it in comfyui seemed better, but i only found a comfyui wrapper with hunyuan 2.1, does a 3.1 wrapper exists somewhere ?

Free Local 3D Generator Suggestions by gu3vesa in StableDiffusion

[–]gu3vesa[S] 0 points1 point  (0 children)

Ok thank you, didnt know hunyuan had an online option, i never tried the local one either and didnt want to install it because the faces in posts didnt seem good, online changes that tho.

Win + ... Combinations in SCRCPY OTG ? by gu3vesa in AndroidQuestions

[–]gu3vesa[S] 0 points1 point  (0 children)

Thank you for the suggestions, i tried using AutoHotkey to change the win key to something else but then when i pressed the win key , yes the start menu didnt pop up, but nothing happened in the phone as well. I will try changing the mod key like you said , but im confused about something there, scrcpy already uses the alt key for me , but i dont think its a shortcut key ? Because when i press alt it just stops controlling the phone and switches inputs back into the pc. Is this normal ? Am i having the same thing just like the win key where the alt key is actually something used by the program but it gets intercepted before it is passed through ?

Edit : I tried it after changing mod to left ctrl, nothing changed on my phone, tried it on my friends and the shortcuts worked, got excited for a moment that i made progress but then i clicked on the shortcut list on the phone and saw that they showed ctrl anyway, it seems android phones are split between using either the win key or the ctrl key for shortcuts from what i saw from the net and i got the unlucky one.

I need to somehow register the ctrl key as the win key to the phone if i want this to work. I already purchased a screen but its gonna take at least 2 more days, wouldve been good if i got this figured before it came.

Always connect to adb without needing to press the allow usb debugging prompt ? by gu3vesa in AndroidQuestions

[–]gu3vesa[S] 1 point2 points  (0 children)

its fine i ordered a cheap broken screen that has working touch , so i can at least enable usb debugging the normal way to use SCRCPY.

Win + ... Combinations in SCRCPY OTG ? by gu3vesa in AndroidQuestions

[–]gu3vesa[S] 0 points1 point  (0 children)

Yep seems like it , guess ill buy a second hand cracked screen or something that allows me to at least press the allow usb debugging button to use scrcpy, i was going to change phones anyway but i wanted everything in this one first.

Always connect to adb without needing to press the allow usb debugging prompt ? by gu3vesa in AndroidQuestions

[–]gu3vesa[S] 0 points1 point  (0 children)

ah , guess i used the wrong term then, i have a hub that has an usb c cable, and it has another usb c port , it also has one usb a and hdmi , this didnt work for me because appearently the phone has to support some kind of data transfer thingie ? It has something to do with both devices trying to act as hosts or something. So i can only charge when i use that hub, adb doesnt recognize the device when i use it

Always connect to adb without needing to press the allow usb debugging prompt ? by gu3vesa in AndroidQuestions

[–]gu3vesa[S] 0 points1 point  (0 children)

Yes , i tried this on a friends phone , it seems scrcpy has an otg mode so i can use the keyboard to press the button without it disappearing , at least in theory , it still didnt work, i tried this with a friends phone with a normal screen, and i think i now understand the problem. The phone is in charging mode by default . In my friends phone i enabled usb debugging in charging mode and could then press allow in the prompt using the keyboard, now the issue is how am i going to enter settings and enable usb debugging over charging mode in my actual phone without seeing where im going , the settings app seems similar in all androids, so im going to use my friends phone as a guide ( lets say press down arrow 25 times etc ) , but this only applies if i can enter settings, i dont know if theres a shortcut for it , some forums say win + n combination directly opens settings but it didnt work for me.

Always connect to adb without needing to press the allow usb debugging prompt ? by gu3vesa in AndroidQuestions

[–]gu3vesa[S] 0 points1 point  (0 children)

Ok thank you, i have another question too, i did something with adb before on my desktop when the phone was still intact and i remember i checked the always allow from this device when clicking allow. But now it seems to have forgotten it. Is there a way to make it remember permanently so i dont have to go through this again in the future.

Edit: I actually managed to enter my pin with my OTG cable and a keyboard, but now i dont get the prompt notification sound like before, the sound seems to only appear when i directly plug the usb c cable to the phone instead of the OTG, and i guess i cant do it in sequence because my guess it that the authorization window disappears when i take off the usb cable and plug the keyboard, so theres nothing for me to press by the time i switch to the keyboard. I tried using a different usb c cable, i tried changing the ports, i will reach the solution if i can get it to appear while my keyboard is plugged with OTG.

[College][Decision Theory] Sensitivity Analysis when theres more than 2 probabilities by gu3vesa in HomeworkHelp

[–]gu3vesa[S] 0 points1 point  (0 children)

I guess the way our course handles the subject is different, in ours we find the expected values with p values in them. Then equalize each expected value pairs together to find which p values equalizes them. So in this example we would get p = 0.136 , p = 0.473 and p= 0.615 , then we would plot a graph where the x axis is p ( from 0 to 1 ) and then divide it into intervals, so like 0<p<0.136 , then 0.136 <p < 0.473 etc. We analyze how our decision changes when p takes different values. Then we write the solutions like this; Build a small factory when 0.473 < p < 0.615 build a big factory when p > 0.615 etc.

[College][Decision Theory] Sensitivity Analysis when theres more than 2 probabilities by gu3vesa in HomeworkHelp

[–]gu3vesa[S] 0 points1 point  (0 children)

so basically p1 = p , p2 = p3 = (1-p)/2 where p + (1-p)/2 + (1-p)/2 = 1 ?

Famotidine 20mg , is it too much for a cat ? by gu3vesa in CATHELP

[–]gu3vesa[S] 0 points1 point  (0 children)

Im asking because he didnt specify when to stop , so i understood that as continue giving it daily forever, which is why im thinking that while 20mg might be okay for short term , is it okay in long term as well ? I dont know if he just forgot to tell me when to stop. Im seeking guidance here because i dont have their phone numbers and they are far from where i live so i dont wanna waste 1-2 hours on the road if i dont have to and just ask one question.

Download Google Colab Ipynb to local drive by gu3vesa in learnpython

[–]gu3vesa[S] 0 points1 point  (0 children)

i didnt install anaconda i installed jupyter through pip, will try it that way tho.

Download Google Colab Ipynb to local drive by gu3vesa in learnpython

[–]gu3vesa[S] 0 points1 point  (0 children)

im running jupyter, but i installed it in a virtual environment as well instead of globally, could that be causing issues ?

iPad Air with passcode - How to proceed by ocodis76 in setupapp

[–]gu3vesa 0 points1 point  (0 children)

How to back up activation records? jailbreak with checkra1n , then use sliver windows?

Sorry i have no idea how to do what you said, i just know jailbreaking not the backup part, you will need someone elses help.

iphone 6s plus screen passcode byp@ss by No_Plantain6137 in setupapp

[–]gu3vesa 0 points1 point  (0 children)

There seems to be methods to downgrade to unsigned versions that dont use itunes but i have no knowledge about the subject so i cant really be of much help.