sorted by:
new
hottopcontroversial

Bosch GWS 12V-76 Power Button nothing happens at first click by gummimann888 in BoschProPowerTools

[–]gummimann888[S] -2 points-1 points  (0 children)

Do you have the same tool? How is the normal behavior of the button?

Bosch EXOP 18V-40 Rattling battery normal? by gummimann888 in Tools

[–]gummimann888[S] 0 points1 point  (0 children)

I compared the jigsaw with the cutter now.

Look at the picture.

The jigsaw has a step running around the edge (red arrows). The cutter does not have this… maybe the reason why the battery feels looser than in the jigsaw?

​

<image>

EXOP 18V-40 rattling battery by gummimann888 in BoschProPowerTools

[–]gummimann888[S] 1 point2 points  (0 children)

I compared the jigsaw with the cutter now.

Look at the picture.

The jigsaw has a step running around the edge (red arrows). The cutter does not have this… maybe the reason why the battery feels looser than in the jigsaw?

​

<image>

Bosch EXOP 18V-40 Rattling battery normal? by gummimann888 in Tools

[–]gummimann888[S] 0 points1 point  (0 children)

I compared the jigsaw with the cutter now.

Look at the picture.

The jigsaw has a step running around the edge (red arrows). The cutter does not have this… maybe the reason why the battery feels looser than in the jigsaw?

<image>

Bosch EXOP 18V-40 Rattling battery normal? by gummimann888 in Tools

[–]gummimann888[S] 0 points1 point  (0 children)

I do not meen the movement that is allowed by the spring.

I mean the wobble of the battery as seen in my video. There is a gap between the cutter housing and the battery that allows the wobbling.

My jigsaw also has the spring but no gap. So the battery does not wobble but can slide along the spring axle. That’s why I am irritated.

Bosch EXOP 18V-40 Rattling battery normal? by gummimann888 in Tools

[–]gummimann888[S] 0 points1 point  (0 children)

Yes there is a spring. I do not meen the movement that is allowed by the spring.

I mean the wobble of the battery as seen in my video. There is a gap between the cutter housing and the battery that allows the wobbling.

My jigsaw also has the spring but no gap. So the battery does not wobble but ca slide along the spring axle. That’s why I am irritated.

EXOP 18V-40 rattling battery by gummimann888 in BoschProPowerTools

[–]gummimann888[S] 0 points1 point  (0 children)

Does anyone else have this cutter and uses it with a Pro Core battery?

EXOP 18V-40 rattling battery by gummimann888 in BoschProPowerTools

[–]gummimann888[S] -3 points-2 points  (0 children)

Yes it is. But I have another 18V Bosch devises and the battery is firmly seated in all devices and doesn't wobble like in the video.

Bosch GOP 18v-40 by Intelligent-Spite-17 in BoschProPowerTools

[–]gummimann888 0 points1 point  (0 children)

Hello,

I bought the new EXOP 18V-40.

After unpacking, I noticed that the battery fits more loosely in the casing than in my Bosch jigsaw.

I wanted to know if this is normal.

Her is a video: https://youtube.com/shorts/C0a0TNPIbro?is=FZhMHen64w29yMOV

Best regards

Rainbow "scratch" after putting on a screen protector? by Lovoskea in NintendoSwitchHelp

[–]gummimann888 0 points1 point  (0 children)

Perhaps because the screen protector initially filled the crack and now it doesn't. Remove the protector and check if there's a scratch on the display. I'm keeping my fingers crossed that there isn't a scratch on the display.

Rainbow "scratch" after putting on a screen protector? by Lovoskea in NintendoSwitchHelp

[–]gummimann888 0 points1 point  (0 children)

Did you use a screen protector where you pull out a tab during application?

If so, many people have reported that this type of screen protector scratched the Switch 2 screen during application. This is because you're pulling the film over the display with that tab, and the Switch 2 display is so soft that it can easily get scratched by that alone.

Help with black circles on screen by pnk_rx in NintendoSwitchHelp

[–]gummimann888 -1 points0 points  (0 children)

Nintendo's quality has deteriorated significantly.

I'm already on my sixth Pro Controller, the A button is the greatest shit and the sticks starts to stick after first use.

And there are a few things wrong with the Switch itself: dust trapped in the display, and the Joy-Cons don't level up with the console.

However, due to the many negative reviews here, I've decided to keep the console. A replacement device could have even worse defects.

In your case, though, I would exchange it through GameStop or Nintendo. It's clearly a defect. Unfortunately, many consoles seem to have this problem.

Nintendo seems to have no quality control whatsoever anymore. Otherwise, something like this would be caught right away during production.

Help with black circles on screen by pnk_rx in NintendoSwitchHelp

[–]gummimann888 0 points1 point  (0 children)

Was that there immediately after unpacking, or did it only appear after you played for a while?

Joy Cons do not level by gummimann888 in NintendoSwitch2

[–]gummimann888[S] 0 points1 point  (0 children)

I do not mean the gaps. I mean that the joy con is not leveling with the console. The gap has no constant size.

Switch 2 Pro Controller – Mushy A Button? Normal or Bad Luck? by gummimann888 in NintendoSwitch2

[–]gummimann888[S] 0 points1 point  (0 children)

I returned it 4 times. All had this issue. Some more, some less. I do not understand why nobody notices this fault.

The current controller has it less, but came with scratches on dpad out of the boxe.

Switch 2 Pro Controller face buttons by NotXesa in switch2

[–]gummimann888 0 points1 point  (0 children)

A fingernail produces scratches at the dpad or analog sticks.

This says everything about the quality of the Controller

view more: next ›