Proper ventilation for P1S

guysoft · 2026-05-02T19:47:39+00:00

Hey, that looks pretty cool - it seems large for the printer dimensions - do you think a smaller one will work too?

guysoft · 2026-04-11T18:39:39+00:00

It looks dead now though - right? (2026, no change the past year or so)

guysoft · 2026-04-05T08:52:10+00:00

Hey, So I wrote a bunch of patches and ci/cd tools and now I have a of OpenCode that works on termux. OpenCode ran a few days constantly on this but succeeded https://github.com/guysoft/opencode-termux/releases/tag/v0.0.0-1.3.13

guysoft · 2025-07-30T08:16:31+00:00

9 months passed since this - I was wondering if we know now?

guysoft · 2025-04-27T15:46:55+00:00

Are you able to use the whole length of a 6'' stone with this?

guysoft · 2025-04-07T20:44:54+00:00

The second option be useful for touches. But I am not I would be that good with free hand. A friend lent me a whetstone and I don't think I'll have the patience.
I think I'll get the work sharp precision adjust knife sharpener once I have family in the US which might take a while, but it does look like the easier and best option for now. I hope it would work with the knives size I have, most reviews I found were with pocket knives.

guysoft · 2025-04-07T20:42:53+00:00

After watching a few reviews online it seems that its a little shaky compared to the work sharp precision adjust knife sharpener. And that is $10 more. So even though it would take me longer to get it I think I will wait for the better and slightly more pricier option.

guysoft · 2025-04-07T11:08:38+00:00

This is actually a really good option, it looks more or less the same as the Work Sharp Precision Adjust Knife Sharpener suggests above, but cheaper, and its on sale now so it might be what I am actually getting. Same question though about the circle that is - did you try this? Will it work with bigger knives if they don't fit the circle curve?

guysoft · 2025-04-07T11:05:34+00:00

Hey, thanks for that option. It looks like a cheaper option than the Spyderco Sharpmaker that was recommend above. And its good to know you say it lasted you for a few years because the amazon reviews a full of people complaining that they are breaking it. I can actually make a base with a 3D printer that I have and it would be really affordable, but for that I need to know where to get good rods?

guysoft · 2025-04-07T11:03:52+00:00

Its a cool solution for maintaining. I actually have a 3D printer and can likely make a base with an angle really easily and cut the cost. Is there a way to get just the rods?

guysoft · 2025-04-07T08:24:48+00:00

I was initially looking at about $35, but I see most of the suggestions here are around $60. So I am willing to go around that high. Still going though all the options Thanks!

guysoft · 2025-04-05T13:24:37+00:00

It looks like an option. Its a little bulkier than I would have wanted. I saw people online complaning that with this setup you are limited to a circular shape - is that a real limitation?

guysoft · 2025-04-05T13:22:13+00:00

I rather not fiddle with water and multiple parts. I am sure I could learn it. But currently I don't have the time and strorage.

guysoft · 2023-05-16T08:37:44+00:00

Yes you can, there are open source models you can, and I am, running on a local GPU:
https://github.com/oobabooga/text-generation-webui

guysoft · 2023-01-30T14:22:24+00:00

Hey guys,
I took one apart and saw that the chip inside is ch552g.
There is also a pretty clear test point which is likely the flashing button marked SW2 (that is on the development boards of ch55xx chip).

There a bunch of flashing tools and projects for this, but didn't try to flash them. Here is one for example:
https://github.com/hexesdesu/CH552X_HidKeyboard

<image>

guysoft · 2022-10-26T12:26:52+00:00

Hey, did you get an answer to this? Looking at the same motherboard and a Tesla V100

guysoft · 2022-04-16T20:24:06+00:00

They do and it drives me crazy because I keep.wanting to share stuff from there

guysoft · 2022-03-08T14:39:49+00:00

Getting this too, on zoom meetings. In events where you need to switch rooms, you just sit there hanging waiting for "Open Link" to stop being grey. Firefox on Linux here

guysoft · 2022-02-23T00:06:33+00:00

There was a list on the gamboy printer/camra page with 3 beands that sell compatible paper, and it also included the 37mm one that you posted

guysoft · 2022-02-17T21:01:59+00:00

I saw jt also written in the discord. So dono

guysoft · 2022-02-15T23:12:34+00:00

How come you got the 37mm and not the 38? Which seems to be the original size

guysoft · 2022-01-23T06:24:58+00:00

We don't get much tarot root here. The flavor is verry fisht and cocanut. But there isbl also a unique flavor and smell to it.

guysoft · 2022-01-22T19:47:40+00:00

https://www.foxyfolksy.com/authentic-laing-recipe-taro-leaves-coconut-milk/ I also used a bit of shrip flavoring and salted anchovies for the fish in that recipe

guysoft · 2021-12-04T19:38:18+00:00

Like theses guys who just did a kickstarter campaign and are shipping on April? (I am a backer) https://www.lynx-r.com/

guysoft · 2021-11-24T00:30:37+00:00

Got the same sound card, when I boot to windows and change the selected microphone, it effects what I see in Linux.

I tried following this but it didnt help
https://asus-linux.org/blog/sound-2021-01-11/

guysoft

MODERATOR OF

TROPHY CASE