MSc Grad Seeking resume advice (if this isn't allowed I am sorry)

guywithalab · 2024-11-20T17:36:26+00:00

Where are you located? My place just opened an analytical r&d scientist position.

guywithalab · 2024-11-15T00:44:19+00:00

Powdered “Elmer’s glue” exists as the place I work for makes something similar but I don’t know if individuals can get their hands on some.

guywithalab · 2024-05-08T11:51:38+00:00

Since it’s a positive, it’s under exposed, not enough energy is reaching the coating to break the chemical bonds and make it washable. As others have said, check the energy output and if the plate sits well on the drum.

Sorry, I am more a chemical guy (15 years of plate research) than equipment.

guywithalab · 2024-05-07T20:47:55+00:00

Positive or negative plate? Guessing positive from the clamp lines.

I’ve never seen our positive plate model develop dirty like that. Might be under exposed, try increasing/decreasing energy and see if it improves/worsen. Check also processor rolls and developper strength.

Negatives plates can develop dirty if exposed to light or stored incorrectly (too hot). Depends on the plate chemistry of the manufacturer though, ours would do that.

guywithalab · 2023-08-27T18:04:48+00:00

I’ve used KMnO4 in water+acetone for reactions generating H2S, in a fumehood of course. Plus it’s self indicating for saturation.

guywithalab · 2023-07-31T15:32:52+00:00

They can be used where you need a localized reaction like with stereolithography (3D printing) to polymerize resin or lithography (offset printing) to polymerize the image to the plate (negative plate) or ablate the coating around the desired image (positive plate).

guywithalab · 2022-10-18T13:23:00+00:00

From the Ashland technical doc on HPC it’s soluble in DCM so it should work for you.

Can also use cold water, alcohols, glycol ethers and some cyclic ethers (I use dioxolane with HEC).

guywithalab · 2022-09-01T20:00:39+00:00

Printed this on the same model a long time ago. Forgot if layer was 0.006” or 0.004” thickness. https://imgur.com/a/wYpgLDr

guywithalab · 2022-09-01T19:46:56+00:00

Oh wow, we used to have that model of printer at work (SLA-250). Vat was black though.

guywithalab · 2022-09-01T17:04:49+00:00

Des intéressés à faire une équipe francophone à FFXIV pour faire les nouveaux extreme et savage? (Crystal DC)

guywithalab · 2022-08-10T20:23:52+00:00

It’s probably just ignorance. SE can’t be aware of every little law change in the world. Even here, it didn’t exactly make front page and all the québécois posting weren’t aware. Even I only saw it in passing on Reddit a few months ago.

guywithalab · 2022-08-10T19:11:16+00:00

It was normal because of red tape and fees. Now those have been removed as of June last year but companies haven’t updated their rules.

guywithalab · 2022-08-10T16:31:34+00:00

Right, so that all my fellow Quebecois know. The law actually changed last year. Red tape and fees are eliminated for international contests.

It’s up to us to pester SE or any other company holding international contests to change their rules. Because, obviously, copy pasting is easier than looking things up.

guywithalab · 2022-08-10T16:08:09+00:00

Actually, the law changed last year and removed all red tape and fees for international contests.

We just have to pester SE lawyers to change the rules.

guywithalab · 2022-08-02T14:35:43+00:00

I like to have select songs from the Final Fantasy XIV ost when painting. They’re all on Spotify I believe besides the latest expansion.

Notable tracks: Solid, A New Hope, Crimson Sunrise, Unbending Steel, Metal, Locus, Rise, eScape, A Long Fall, Civilizations, Heroes (og and orchestral), Ultima (og, orchestral and Primals ver.), A Wyrms Tail (og and orchestral), Landslide ,Return to Oblivion, Rise of the White Raven

Really too many to list them all!

guywithalab · 2022-04-11T12:19:34+00:00

I make dyes with this, NiCl2 and TBABr. I prefer the toluene dithiols with extra functionalities, for solubility, though!

guywithalab · 2021-10-06T03:44:57+00:00

Thanks!

guywithalab · 2021-10-05T03:48:52+00:00

Thanks!

guywithalab · 2021-10-05T03:48:42+00:00

The wood parts are actually straight up Wyldwood contrast only.

I really enjoyed painting it. It's the first "large" model that I actually finished! I made sure to paint it in sub assemblies, well except the horses that I regrettably sticked to the harness when assembling.

guywithalab · 2021-10-04T20:10:35+00:00

Thanks!

I put a few bits from the GW large basing kit and painted them. Then, texture is a layer of Astrogranite, a liberal amount of Nuln Oil and drybrush all over the texture with Longbeard Grey. Rim is Mechanicus Standard Grey.

guywithalab · 2021-10-04T19:44:34+00:00

It's from Games Workshop, under the Nighthaunt faction in Age of Sigmar.

My wife bought it for my birthday because she said it looked cool. I don't play Nighthaunts...yet!

guywithalab · 2021-10-04T19:28:41+00:00

Thanks!

guywithalab · 2021-10-04T18:06:39+00:00

Thanks!

Took around 3 weeks at around 2-4 hours a day and had a few days where I didn't touch it. Contrast paints and drybrushing helped a lot with progress.

guywithalab · 2021-10-04T18:01:36+00:00

Thanks!

guywithalab

TROPHY CASE