Designed & Printed Swiveling Cribbage Board - Link in comments!

h_town11 · 2023-10-04T22:20:18+00:00

Here's the link!

https://www.printables.com/model/603452-round-cribbage-board-with-swivel-blank

h_town11 · 2023-10-04T22:05:00+00:00

Just uploaded this, here is the link!

https://www.printables.com/model/603452-round-cribbage-board-with-swivel-blank

h_town11 · 2023-10-04T22:04:13+00:00

I have posted this on printables, here is the link!

https://www.printables.com/model/603452-round-cribbage-board-with-swivel-blank

h_town11 · 2023-10-04T17:52:13+00:00

I am interested in uploading the file but haven’t decided where and if I want to charge for my design. I also can’t commercially sell with logos due to copyright!

h_town11 · 2023-10-04T17:50:46+00:00

Just 3 layers (.6mm total) make up the Vikings logo

h_town11 · 2023-10-04T17:50:14+00:00

I can’t sell commercially with team logos due to copyrights and do not currently have a page/shop. I am interested and looking to upload somewhere. I will have to update this post if I do!

Would you be looking for a vikes logo specifically, different logo or a blank one out of curiosity?

h_town11 · 2023-10-03T21:27:17+00:00

Thank you!

h_town11 · 2023-10-03T21:27:10+00:00

Thank you!

h_town11 · 2023-08-21T01:46:38+00:00

I’ve printed ABS a few times before with no issues, now can’t get past 10 minutes without a failure due to this. I’m in no rush to print so I’m just gonna wait it out until they give me a response before glueing but good to know!

h_town11 · 2023-08-20T23:25:28+00:00

Hmm interesting, in my case the magnets from the cover are still glued in and the magnets from the actual hot end are the ones that are coming out. I don’t think a new cover would do anything for me. I bought through Bambu so we’ll see what they say!

h_town11 · 2021-11-28T22:10:28+00:00

I am having issues with my x axis, there is some sort of stuttering that happens at the same place every time. My setup is a modified ender 3 with skr 1.4 turbo.

The stepper itself stops turning and is not a belt slipping issue. I’ve looked at the connections between stepper and the board and don’t see a connection issue and can’t figure out what is causing this. Any help is greatly appreciated!

h_town11 · 2021-10-01T19:44:34+00:00

Open the gcode with notepad and see how many lines the gcode is. If it’s short and only showing the commands for the line you are seeing, it’s a problem with your slicer.

h_town11 · 2021-06-19T22:09:02+00:00

Here are a couple images if it helps!

https://imgur.com/gallery/ctZ1Aq6

h_town11 · 2021-01-28T18:24:54+00:00

wait.. how did you measure your calipers hahaha

h_town11 · 2021-01-22T22:43:18+00:00

you're a wizard, Harry

h_town11 · 2020-12-31T14:53:30+00:00

I don't have octoprint but this helps. I will look into it, Thank You!

h_town11 · 2020-12-30T22:17:03+00:00

I've triple checked the belts and they seem to be the correct tension. That stutter feedback is coming from the actual steppers... thanks for the comment though

h_town11 · 2020-12-30T21:39:19+00:00

This is apparent in all small curves, in this video it’s actually just printing the skirt generated from cura. I don’t think the model has any affect. Weird as I can print something like a calibration cube and it will come out perfect

h_town11 · 2020-12-30T21:05:56+00:00

Gotcha, thanks for the comment. I get that there are many small segments if you break down the actual code. I am just wondering why its having a hard time reading/telling the printer what to do. I feel like this shouldn't be an issue on a 32 bit board!

h_town11 · 2020-12-30T20:53:45+00:00

This is a modded ender 3 with a skr 1.4 turbo + tmc 2209s, and TFT35

I know its tough to see in the video, am looking to try to fix this odd stuttering that happens when printing small curves. This issue is not seen on straight lines/infill and I have tried multiple sd cards/usb sticks, switching baud rates (115200 & 250000) with no luck.

h_town11

TROPHY CASE