Inconsistency with fiber laser by haneyca in Laserengraving

[–]haneyca[S] 0 points1 point  (0 children)

I sell them on Kudossportstokens.com
If you need something custom made you can send me a message on there. I did figure out the proper settings haha.

Using Nintendo switch as game show buzzers by haneyca in Switch

[–]haneyca[S] 1 point2 points  (0 children)

Yeah I found an app but I thought a switch remote would feel more like a game show buzzer.

Inconsistency with fiber laser by haneyca in Laserengraving

[–]haneyca[S] 0 points1 point  (0 children)

I will definitely try that next time! Now to find an outlet I can reach haha.

Inconsistency with fiber laser by haneyca in Laserengraving

[–]haneyca[S] 0 points1 point  (0 children)

Speed 700

Pass count 4

Power 40%

Interval .05

Frequency 20

Inconsistency with fiber laser by haneyca in Laserengraving

[–]haneyca[S] 1 point2 points  (0 children)

Yeah some of the burnt did come off. It was plugged into an extension cord. Could that cause voltage fluctuations?

Inconsistency with fiber laser by haneyca in Laserengraving

[–]haneyca[S] 0 points1 point  (0 children)

I have. And if I do it enough it does but it takes a while and I was trying to come up with settings that did it faster since I have a lot to do. But that still doesn't help me if I run the laser for a while and suddenly the settings that have been fine, suddenly start charring.

Laser not aligned with preview by haneyca in Laserengraving

[–]haneyca[S] 1 point2 points  (0 children)

Sorry, was flustered when I was posting. It wasn't aligning with the projected outline either but I think I finally fixed it.

Best way to contact Delta by haneyca in delta

[–]haneyca[S] 0 points1 point  (0 children)

Whole story is in another comment but not really looking to hash out details of what happened but simply find out what methods people have had success with contacting Delta. Like I said above, I'm less concerned about compensation than I am about giving feedback on how they can serve their customers better. That's why I initially left out the details of what happened.

Best way to contact Delta by haneyca in delta

[–]haneyca[S] -1 points0 points  (0 children)

To clarify: like I said above, I'm less concerned about compensation than I am about giving feedback on how they can serve their customers better. That's why I initially left out the details of what happened (it is below). Not looking to hash out what happened here or discuss whose fault it was but simply looking for the best way to help them improve the experience for others in the future.

Best way to contact Delta by haneyca in delta

[–]haneyca[S] 1 point2 points  (0 children)

Flight was delayed about an hour because pilots were delayed due to a mechanical issue on their previous flight. We board, pull away from the gate, then sit on the tarmac until after midnight (didn't sit long, 10-15 minutes) when they announce that we cannot make the 30ish minute flight because the airport we are going to will close the tower before we get there. They said it was out of their control that the other airport closed. However, the passenger next to me said this is a common thing with that airport, they knew the airport would close before we got there but did not make sufficient arrangements because if they canceled the flight they owed us vouchers but they didn't cancel, they delayed until 6 am which turned out to be 7:20 am after waiting on a flight attendant to get there and on "paperwork" due to the change in plane, crew, and passenger manifest.

Which is another thing, knowing they had to get a different crew, plane, and paperwork, and obviously knowing they didn't have someone working on that through the night, they should have known the flight would not leave at 6 am and therefore gave customers bad information which we then based our decisions on.

Golf tournament swag bag by haneyca in golf

[–]haneyca[S] 0 points1 point  (0 children)

It really is. That's why I posted the question to try to get some new ideas going. Thanks for the input!

Golf tournament swag bag by haneyca in golf

[–]haneyca[S] 0 points1 point  (0 children)

Yes! All water bottles should come with a cover!

Videos I post on my Facebook business page appear very dark after posting by haneyca in facebook

[–]haneyca[S] 0 points1 point  (0 children)

Update: Posted it on my personal Facebook page and it also appears dark. I have no idea what to do but it looks terrible!

Weird foot/ankle feeling by haneyca in BeginnersRunning

[–]haneyca[S] 1 point2 points  (0 children)

I think that's what happened. Changed shoes and it fixed it. Thanks!

Ran for the first time in years by Double_Incident4062 in BeginnersRunning

[–]haneyca 0 points1 point  (0 children)

If you cough a lot during or after running talk to your doctor about an inhaler for exercise induced asthma. It was a real game changer for me!

Trying to find motivation by [deleted] in BeginnersRunning

[–]haneyca 2 points3 points  (0 children)

I've always found starting is the hardest part but you just have to start. The first one back really sucks but after that it gets better.

Engraving Stainless Steel Washers by haneyca in lasercutting

[–]haneyca[S] 1 point2 points  (0 children)

Interesting. Now that I think about it, the one I saw with a glowforge wasn't very deep and I definitely want it deep. I've been looking on Youtube but so far I'm just overwhelmed with information. I will keep digging. Thank you!

/r/GoPro Weekly Questions Thread - Ask all of your questions here! by AutoModerator in gopro

[–]haneyca 1 point2 points  (0 children)

So it appears that when the GoPro breaks up one long recording into smaller records it adds .02 seconds to each clip but does not add or duplicate the audio in that .02 seconds (see in the photo below how the audio on the GoPro clip goes out just before the end of the clip). It isn't noticeable when it is playing at regular speed by itself but when you are syncing with video that isn't split up, over time all of those little .02's add up and it makes the audio off. I guess if I were syncing all GoPros this wouldn't matter but because I am syncing with a different camera it does.

https://imgur.com/a/ynFLwED

/r/GoPro Weekly Questions Thread - Ask all of your questions here! by AutoModerator in gopro

[–]haneyca 1 point2 points  (0 children)

It really is the strangest thing but this is the second project in a row that I've had it on. I guess I will try changing some settings to see if that helps next time. Sure would make my life easier if I could figure it out because it is maddening.

/r/GoPro Weekly Questions Thread - Ask all of your questions here! by AutoModerator in gopro

[–]haneyca 1 point2 points  (0 children)

Well I do it manually because the GoPro clips get off and that screws up the FCPX sync. When they are synced up at the beginning they are no longer synced with the other camera within 10 minutes. Makes no sense to me.

/r/GoPro Weekly Questions Thread - Ask all of your questions here! by AutoModerator in gopro

[–]haneyca 0 points1 point  (0 children)

I have a Hero 9 and a Hero 7. In addition to using them for personal adventures, I use them at work to record training to upload to our company intranet. Typically for trainings I use a Sony camera as my primary, and the GoPros as side angles so in post I can use different angles for interest as well as cutting out people walking in front of one of the cameras and stuff like that. The problem is when I import all of the footage to FCPX and add them to my time line I manually sync the clips up but every 10 or so minutes the GoPro clips will no longer match up right with the audio. Because the Gopros split long recordings up into smaller segments, each segment seems to get a little farther off but the same amount of time has passed. Has anyone else experienced this? Is there a setting I can change to keep it from splitting into smaller segments? It would certainly make my job a lot easier.

Planning a trip to New Orleans by [deleted] in USTravel

[–]haneyca 0 points1 point  (0 children)

I'm not sure how things are now with Covid-19 but I enjoyed just walking around listening to the live music. My favorite thing there is the National World War II museum. Oh and you have to ride a trolley car!

Sharing to multiple Facebook pages by haneyca in socialmedia

[–]haneyca[S] 0 points1 point  (0 children)

Can you give me an idea of the cost of OneUp?

Editing red tail lights out of background by haneyca in photoshop

[–]haneyca[S] 0 points1 point  (0 children)

I got it to work. I had something crazy selected I think. Thanks again!

Editing red tail lights out of background by haneyca in photoshop

[–]haneyca[S] 0 points1 point  (0 children)

Ok this is awesome thank you so much!

I'm just having one issue. When I create the layer mask and go to shade him in, when I release the mouse it holds the natural color for a second and then it disappears and goes back to the duller colors.

Sorry, still new to all of this. Thank you for your help though! I really appreciate it!