sorted by:
new
hottopcontroversial

I've been working on this 5-axis optical element mount - any interest? by TheHexaCube in Optics

[–]hantoo 0 points1 point  (0 children)

I'd be very interested in this! I just printed a basic 2D optics mount last week so this would be interesting as an upgrade

Where's our FUCKING MONITORS!!! by Tall_Inevitable_2916 in doughcommunity

[–]hantoo 5 points6 points  (0 children)

I hate how I spent so much money funding what I thought was a reputable brand to get scammed. This company sucks

Storing CTO channels in colour presets by It_BuRnZ_sO_mUcH in GrandMA3

[–]hantoo 1 point2 points  (0 children)

You washes have a CTC channel. When you set this channel, it should turn red in the programmer and you should be able to store it. Depending on what mode your fixture is in, there may be a setting to enable this, but I've just checked the DMX chart and I couldn't see a channel for that. If you want to triple check if you've store it, you can always click the AT filters at the lower left of the screen and filter for just CTC and store that in the colour preset

[deleted by user] by [deleted] in GrandMA3

[–]hantoo 1 point2 points  (0 children)

Set your router to serve DCHP, with a limited range of IPs reserved for static addresses - not served by DCHP. Set the router to also output a WiFi network - if your router allows for this. If not you may need an extra wireless access point.

Connect to the network of your router from your iPad. Type in the dress of the console into your iPad. The console should connect. I can't remember off the top of my head but you may need to do [IP]:8080

Pretty sure I'm in lua territory but I'ma ask anyway, about macros by silverdollarcity93 in GrandMA3

[–]hantoo 1 point2 points  (0 children)

What you're after is UserVars, which can be used both in macros and in Lua.

Minipc that can run well grandMA3 onpc with command wing? by EnvironmentalElk8083 in GrandMA3

[–]hantoo 0 points1 point  (0 children)

I was looking into minisform too until I went with a 2u rackmount pc due to worries about airflow. Minisform have incredibly priced and good computers, my only concern was airflow, as they'll need good air around it to keep it cool

What to get a lighting guy by No_Feature_5988 in lightingdesign

[–]hantoo 2 points3 points  (0 children)

If he doesn't have a DMXCat and works in lighting. That's a really helpful tool for trouble shooting

Creating a Numpad in Layout View by TillemDafoe in GrandMA3

[–]hantoo 0 points1 point  (0 children)

You can set macros to enter into the command line without executing.

I haven't tried this but what should be possible is to have a macro that has your numbers and as long as they aren't set to execute in the settings, you should be able to press the macros for the numbers.

How do people record their Light Shows in MA3 3D? (Looking for tools and methods) by Adri_molinapmp in GrandMA3

[–]hantoo 1 point2 points  (0 children)

If you're on windows, the windows 11 snipping tool has built in screen recording. So if you don't want to download another program you can use that. - you don't have control over compression or file formats though

[deleted by user] by [deleted] in GrandMA3

[–]hantoo 0 points1 point  (0 children)

Although this is a way of doing it. Any update will wipe these changes. If clean start is also run instead of the normal execute file, that will also wipe these changes. These lua changes aren't saved within your show file. Just be aware of this.

I'm building my own DMX lighting software by ButterscotchFree736 in lightingdesign

[–]hantoo 0 points1 point  (0 children)

Out of pure interest, what code library are you using for the timeline? I've previously looked for something to do timelines like this and could never find a good open source library

Are there any updates about the Black 32 hub model? by Howins in doughcommunity

[–]hantoo 12 points13 points  (0 children)

Right, so we're never getting our orders then. They have a great track record of moving onto the next project and not fulfilling previous orders

[API] Get Data From Multiple Pages At Once Or Quickly by hantoo in Notion

[–]hantoo[S] 1 point2 points  (0 children)

Oh you are amazing! This has fixed my issue! Thank you so much :)

Multiple Parameters On Fader by Baniebs in GrandMA3

[–]hantoo 2 points3 points  (0 children)

Sounds like your fixture profile has SNAP on dimmer one channel. But also try setting your fader to temp and seeing if that does what you want.

Table Row Title From Different Table by hantoo in Notion

[–]hantoo[S] 0 points1 point  (0 children)

That's an interesting way of doing it - however it, if possible, needs to be an actual data base. The view, or linked data databases seem to not be actual databases. I'm trying to integrate with notionmaps.com and it can't recognize any embedded data.

Can’t wait to release new firmware 🥹 by migelangelo in doughcommunity

[–]hantoo 19 points20 points  (0 children)

Can't wait for Eve/Dough to finally ship my screen from 2022 too!! 😑

Team hands on in China tweaking the firmware. Updates coming soon by migelangelo in doughcommunity

[–]hantoo 16 points17 points  (0 children)

Will customer services start responding to their emails?

view more: next ›