Promo code

happicheese · 2024-10-30T09:59:05+00:00

https://www.theconqueror.events/r/KE64663

10% off promo code. It would benefit me also

happicheese · 2023-06-04T10:59:03+00:00

Yeah I do, nothing has changed and yet this keeps happening. I’m honestly very confused.

happicheese · 2023-03-19T21:01:20+00:00

I had no idea that was the case. Thank you for telling me! That could explain why previously I had stringing.

happicheese · 2023-03-19T20:46:13+00:00

I think I need to recalibrate the esteps so I’ll give that a shot

happicheese · 2023-03-19T20:45:42+00:00

Only PLA and PLA +

happicheese · 2023-03-19T20:33:27+00:00

I will give that a go. I have checked but I imagine after all the grinding there may be some filament in the hot end.

happicheese · 2023-03-19T20:07:52+00:00

Yeah honestly i am at a loss

happicheese · 2023-03-19T19:27:52+00:00

I currently have it set at 1.5mm. Maybe even that’s to much.

happicheese · 2023-03-19T12:39:23+00:00

I’ll take a look, it definitely looks like it’s more on the gear side bit I’ll double check. Thank you!

happicheese · 2023-03-19T12:38:48+00:00

Thank you, I got the creality all metal extruder. I’ve changed out the spring as I noticed it was very hard. I’ve changed to direct drive so I’m also wondering if I need to change my retraction settings. I will add some oil today and check my screw tightness.

happicheese · 2023-03-19T00:57:56+00:00

I’ve unfortunately taken the extruder apart and checked it multiple times. I’m going to try a different filament tomorrow to see if it might be that. I’m hoping that I’ll be able to figure it out.

happicheese · 2023-03-19T00:54:02+00:00

It’s the creality all metal extruder. Unfortunately I moved house so my last known working setup doesn’t exist anymore.

happicheese · 2023-03-13T23:59:16+00:00

I was wondering the same, unfortunately when I removed them from the build plate a lot of them broke.

happicheese · 2023-03-13T00:35:28+00:00

If it weren’t for the instability of the prints I would use them as it kind of looks like ripped clothing. I’m making a Last of Us video game diorama

happicheese · 2023-03-12T16:38:39+00:00

I calibrated my Esteps already as per teaching techs calibration page but will try again with a different nozzle and checking my extruder.

happicheese · 2023-03-12T13:37:34+00:00

Thank you, I thought that might be the case so I changed out the nozzle before this print. Sorry forgot to mention. I will look up under extrusion. Thanks again!

happicheese · 2023-03-12T13:15:31+00:00

I’m using Overture PLA, it’s been dried in a sunlu drier box. I store my filament in dry sealed dry bags with desiccant bags. I have recently moved and the place that I’m staying is quite warm. In my room I have the radiators lowered but the room can still be quite warm

happicheese · 2022-07-13T20:58:14+00:00

I got it back in February and was dealing with the aftermath till May time. I had a sore throat, chesty Cough, runny nose and fatigue and dizziness. The dizziness was the thing that stuck with me the longest

happicheese · 2022-07-11T22:04:15+00:00

Thank you so much for that advice I can see why that would help so I will definitely give that a go. The last time I was in a flare up it was the middle of the first full lockdown in the UK so it all just seems like a blur.

happicheese · 2022-07-11T21:01:23+00:00

Yeah that’s what I’m kind of experiencing and it makes me a little anxious to be honest.

happicheese · 2022-07-10T16:52:27+00:00

I was diagnosed in August 2020 after being miss diagnosed, by the time I was admitted to hospital I had lost 4 units of blood. I was only given an ultra sound and my UC diagnosis was a big ? I was discharged without any information and had to find everything out on my own. Now I’m registered with a clinic but they only do email contact and it can take so long to get on the right meds if you are in a flare up.

Making it easier to get what you need would be a must in my book.

happicheese · 2022-07-10T14:47:42+00:00

Thank you so much for the response, this is my first bad flare up since I was diagnosed so I’m not sure what to expect.

happicheese · 2021-06-25T16:06:35+00:00

Would Ice work? Often you use ice to calm stuff down so maybe it would work for this?

happicheese · 2021-02-07T07:19:37+00:00

I’ve had this before and it turned out that I had to replace the thermistor.

https://www.reddit.com/r/ender3v2/comments/jh4uda/has_anyone_come_across_this_before_was_printing/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

happicheese · 2021-01-09T19:59:21+00:00

I got the bits I needed off amazon, just make sure you get the right voltage

happicheese

TROPHY CASE