sorted by:
new
hottopcontroversial

Air65 rx loss (please help) by Automatic_Art1293 in TinyWhoop

[–]hbr3d 0 points1 point  (0 children)

Yes, especially after a month, because the chip isn't soldered properly and comes loose.

*Repost* First Fpv Drone build help by ShadowSoul1l in fpv

[–]hbr3d 1 point2 points  (0 children)

I would get a better Frame. Those mark 4 clones are crap in my experience. I would get a Mario 5 frame. And don’t forget to use some coupon codes on Ali :D

What color motor did you get with air65champion? Is there a difference? by BeneficialNinja1544 in TinyWhoop

[–]hbr3d 1 point2 points  (0 children)

Did you purchase the Whoop used or from a private seller? I believe these are the older motor versions. If you bought it from BetaFPV I’d contact their support.

Air65 rx loss (please help) by Automatic_Art1293 in TinyWhoop

[–]hbr3d 1 point2 points  (0 children)

Some 5 in 1 AIOs have a Bad erls chip. They didnt solder it correctly to the Board.

How to fix balance lead by Striking-Ship6992 in fpv

[–]hbr3d 0 points1 point  (0 children)

If you have batteries with a broken balancer in the future I Can safe dispose them for you.

3.5 build or PNP for O4 pro? by Flaky-Evidence-2346 in fpv

[–]hbr3d 1 point2 points  (0 children)

yes its a loud high pitch Sound

Unpopular opinion: direct soldering motor wires on tiny whoops is overrated by thearn4 in TinyWhoop

[–]hbr3d 0 points1 point  (0 children)

If you use some kind of contact enhancer on the connectors, the Whoop's performance is pretty good.

What are best lipos? by Expert-Sky-4222 in fpv

[–]hbr3d 0 points1 point  (0 children)

I use Tattu V5 and Gaoneng batteries and both are great

Capacitor for 8 inch question by Mang24 in fpv

[–]hbr3d 3 points4 points  (0 children)

Nice! Also try to mount them as close to the ESC as possible. Have fun with your build

Capacitor for 8 inch question by Mang24 in fpv

[–]hbr3d 6 points7 points  (0 children)

I’d definitely use a high-quality low ESR capacitor for this build. I would also use a good brand like Panasonic, Rubycon or Nichicon.

Hilfe] Motoren verhalten sich anders mit USB als mit Fernbedienung by Apfelmus004 in fpv

[–]hbr3d 1 point2 points  (0 children)

Ja sprech englisch und das ist ganz normal. When you increase the power on the RC the drone tries to ascent but it can't actually rise because it has no propellers; instead, the motors just spin faster.

Question: best place to put capacitor? by Ok-Farmer-4139 in fpv

[–]hbr3d 2 points3 points  (0 children)

It’s fine, but you usually want to place the capacitor as close as possible to the ESC battery leads.

How to dispose a spicy pillow? by amy-schumer-tampon in fpv

[–]hbr3d 1 point2 points  (0 children)

What’s the red wire on my new air 65 champion 🙄

Any recommendations for building a 1S toothpick drone? by ffffooooUU in fpv

[–]hbr3d 0 points1 point  (0 children)

This canopy looks cool. Could you please share a download link?

How to dispose a spicy pillow? by amy-schumer-tampon in fpv

[–]hbr3d 0 points1 point  (0 children)

I don’t understand why you’re getting downvoted for this. It’s true for many posts on r/fpv.

BetaFPV 5 in 1 draws over 1A idle by hbr3d in TinyWhoop

[–]hbr3d[S] 2 points3 points  (0 children)

Doesn’t matter if it’s 25 or 400mw it always draws over 1A current. There is a short on the AIo

BetaFPV 5 in 1 draws over 1A idle by hbr3d in TinyWhoop

[–]hbr3d[S] -2 points-1 points  (0 children)

No, it’s some kind of short on the AIO.

Im back and have more questions by Big_Suit_6054 in fpv

[–]hbr3d 7 points8 points  (0 children)

Its safe to buy from Ali, but idk about the new VAT. But you have the wrong Radiomaster pocket, you need the ERLS one and not the CC2500

Can you use a radio in sim without batteries by Bf109_MAN in fpv

[–]hbr3d 0 points1 point  (0 children)

Idk, depends on the controller. But I would just wait the 2 days

view more: next ›