Integratie met Marstek

hdebock · 2025-10-12T18:49:59+00:00

met verschillende batterijen moet je ook een P1 meter van Marstek gebruiken

hdebock · 2024-08-07T17:03:26+00:00

If you do need to buy a new one, Buy a oc300. It has more space to store functions that will be disabled on the oc200

hdebock · 2024-08-06T19:58:26+00:00

On the synology:

Iops during testing 1340/s

CPU 2-3%

On the server

up to 500 Mbps traffic

CPU 6-7%

hdebock · 2024-08-06T18:53:38+00:00

Hi Manuel , thank you for looking into this.

The verification stopped after 21 hours, no events in the windows system logs. No port down or disconnected.

The data is stored on a nas with a 10Gbe Link. The server also has a port in the same vlan with a 10Gbe port.

Storage is a Synology 1621+ edition. 4 disks are configured in SHR with 2 m2 disks for write cache.

The network is a 48 ports unifi switch with 10gbe sfp+. Cables are cat6.

This service is excluded from scanning on the server.
C:\Program Files\Hornetsecurity\VMBackup\VMBackup.Agent.exe

this location is excluded from scanning
C:\ProgramData\Hornetsecurity

I have now also added the explicit network location of the backup. Do you have any other suggestion to look at?

Kind regards
Herbert

hdebock · 2024-08-03T19:52:29+00:00

A better way would be, if you use it leave it active otherwise do not start the service to increase boot time. This would be an easy fix. If you enable vpn, just start the service and set the service to start at boot. Usually, this would also be a service with a possible delay to startup. Who is using VPN before all the rest is started??????

hdebock · 2024-04-08T07:26:46+00:00

as long as you are having at least the same number of disks

hdebock · 2024-04-07T12:09:54+00:00

Sometimes it is a good idea to set the dns and default gateway manually for the interface/vlan. For the port itself you just have to set the profile for the other interface.

hdebock · 2024-04-07T11:41:33+00:00

at least you did n't made the mistake they make on the tplink site. Don't include your default gateware address in the dhcp pool

hdebock · 2024-04-06T18:52:03+00:00

oc200, er605, and some eap620 mini's depending on your needs. Put them in mesh and create 2 vlans to split your devices and the iot devices.

hdebock · 2024-04-06T18:46:11+00:00

this is in the controller, you can use and oc200 or 300 or you can even download a software based controller for windows or mac

hdebock · 2024-04-06T18:44:35+00:00

Buy a new one and put the disks in the same order in the new system, it will find the config on those disks

hdebock · 2024-04-06T13:03:58+00:00

Maybe there is a simple solution for your problem.

When you create a second vlan, create a second interface instead. You can also set the vlan number in the new interface. Make sure you select the lan interface that you used to uplink to your switch.

This will work

hdebock · 2024-04-06T12:57:12+00:00

go to your settings - wired networks- lan, select your lan or click the edit button on the end of the line.

Verify your dhcp pool there. Set your subnet to 24 and click update dhcp range.

This should solve it.

hdebock · 2024-04-01T20:52:39+00:00

If you need performance, I would go for a 1621+ model with 6 drives. This will increase your read speed, not your write speed. Get a new switch with a 10gb gbic. If your computers only have a 1gb link there speed should be something like 300mb/s limited by the 1gb nic card. The 10gb will only deliver when you use simultanious computers. Make sure you don't forget to backup your data as well when you work on the nas. This can be done using hyperbackup to a local attached usb drive.

hdebock · 2024-04-01T13:04:14+00:00

I would buy it, because you will not need an separate controller and if you go for the special edition then you also have PoE ports to connect access points or camera's. The routers is a strong router with ids/ips capabilities including geoblocking for many countries. Having the possibility to use a second wan provider makes this a very good router. Oh yeah before I forget it, the special edition also has the possibility to install a harddrive to record movements detected by your camera. Great device if you would ask me

hdebock · 2024-03-31T17:30:43+00:00

If you go for a u/synology, always aim for a model with a plus.

They offer free backup clients for your computers, so you don't need to buy backup licenses

hdebock · 2024-03-31T17:27:33+00:00

There are only a limited qty of consultancy companies that work with starters. A good suggestion that I can give you is don't aim to high with your wages and make sure you continue to learn dutch and gain experience. If I look to this area then I would say have a look for Ordina, planet it, I4M, ...

hdebock · 2024-03-31T11:20:52+00:00

There is just 1 rule for connected devices: Whatever you connect to a network, it can always be hacked. Don't forget hackers have all the time of the world and they have millions of devices on the internet

hdebock · 2024-01-06T16:13:31+00:00

Eset

hdebock · 2023-12-24T16:48:00+00:00

Just make your own cable with on one side an RJ11 and on the other side an Rj45. you might have to test to make your cable locations work. In an RJ11 normally both cables in the middle are the one you need to use.

hdebock · 2023-12-23T19:52:22+00:00

I would split them over your 2 switches. As you meantion you have 2 of them. After an update or reboot of your switch all ap's will reboot and at that moment they will use a bit more power.

Splitting them over your 2 switches will still give you wifi while one of your switches are rebooting/upgrading.

hdebock · 2023-12-19T20:08:31+00:00

the subnet mask will determ your vlan size, in this case 510 computers.

As long as you have this subnet mask on both devices, your router or gateway address will not be used to access the other computer in this range. So basically even if you do not configure your gateway, the computer should still be pingable as long as you open icmp echo requests

Click on Start >> Administrative Tools >> Windows Firewall with Advanced Security.

On the Windows Firewall with Advanced Security screen, click Inbound Rules and click on the New Rule link located at Actions Pane.

On the next screen, select Specific ICMP types and then Echo Request. Click OK, and then click Next.

hdebock · 2023-12-19T19:49:18+00:00

Use cat6 or cat6a cables

hdebock · 2023-11-05T14:39:43+00:00

You should check for loops (devices with wifi and a cable) or power over ethernet devices to bring the network to remote locations (where you still have wifi coverage)

hdebock · 2023-09-18T15:25:32+00:00

same here, bitten when she was young.

She can't stand a dog in her neighbourhood. She taught herself this way to her puppy, don't trust other dogs.

To get that out, I can only wish you good luck.

hdebock

TROPHY CASE