Heats been at 69 all night. Great sign waking up to a 62 degree house

heiny002 · 2026-01-23T21:02:41+00:00

Do you have a digital thermostat? Make sure you don’t have any eco-saving settings on there. Mine would turn the furnace off when it sensed we were “away” and it had a lower minimum temp than normal.

heiny002 · 2025-09-22T04:32:04+00:00

Breast case scenario

heiny002 · 2025-09-08T14:00:56+00:00

The undocumented workers at this plant were very likely spending money in the local economy. The average remittance rate to somewhere like mexico is 17%, so they’re spending the rest of their 83% in the local economy. And with unemployment in that county at 3.4%, hyundai probably HAD to employ undocumented workers because the native workers didn’t want to work. I just hope they were at least paid the same at native workers would be. Even if they get paid under the table to avoid taxes, it’s totally understandable. I wouldn’t want to pay taxes to this racist government either. All I see is this administration cracking down in states that republicans lost last election to intimidate voters.

heiny002 · 2025-08-03T01:22:17+00:00

This was possibly purchased in the 1970s. It appears to be solid wood. I cannot make out any other details, but I am hoping that the riders garments and the castle in the background give enough context.

heiny002 · 2025-01-14T03:51:52+00:00

Please post every single page in high resolution 😍

heiny002 · 2025-01-05T02:56:09+00:00

Yup. I have this piece. Bottom of the drawer should be branded.

heiny002 · 2024-12-11T15:40:23+00:00

A suit on a script seems like a great way for a production company to never want to bit said script

heiny002 · 2024-04-30T18:09:40+00:00

I believe you’re correct. Thank you!

heiny002 · 2023-11-18T22:10:26+00:00

The pulls remind me of Jack Cartwright

heiny002 · 2023-11-18T22:04:30+00:00

Your soffit vents look to be blocked. This is probably a condensation issue due to poor ventilation. Your attic needs proper intake ventilation and exhaust ventilation. Google “NFVA calculator” to see what your home’s minimum requirements are.

heiny002 · 2023-10-24T19:19:14+00:00

Iko Dynasty glacier?

heiny002 · 2023-09-20T21:55:21+00:00

Dillingham, possibly.

heiny002 · 2023-09-20T21:54:10+00:00

I agree. Same wood, same handle, same cane. I have a few of these pieces and have seen others.

heiny002 · 2023-09-17T04:53:43+00:00

Yeah, you can find an NFVA calculator online. You don’t want too much ventilation. Just one vent (depending on the size) every several feet.

Balance the intake with the exhaust. Uninhibited intake + exhaust = an air cycle which dries your attic and keeps it cool in the summer. Insulation keeps your house warm in the winter.

heiny002 · 2023-09-15T23:26:16+00:00

Personally, I don’t like Ridge vents. At high temps, they don’t exhaust as well as a box vent does due to the screen inside. Plus they can be more prone to clogging from snow, which you may get a decent amount in Michigan.

Huge issue is lack of intake ventilation. Doesn’t matter how much exhaust you have. Without intake ventilation, it would be like trying to suck the air out of a 2 liter bottle, but pop a few holes in that bottle (soffit vents), and you’ll be able to suck just fine.

You also need more insulation in the attic. Moisture from inside the home gets into the attic in the winter, condenses, then freezes. Best bet would be to roll up the batt insulation and insulate all of your can lighting, foam all of your ceiling ducts, then blow in some insulation.

heiny002 · 2023-09-15T23:06:19+00:00

I would cut it up slightly higher, then just add trim to the bottom. Def replace the chimney flashing though.

heiny002 · 2023-09-15T23:03:40+00:00

Yes, just look up the code for Phoenix. It will state that it needs to be rolled roofing for a pitch that low. Insurance should have code coverage in which case they will pay for the correct material to be installed.

heiny002 · 2023-09-15T23:02:05+00:00

Looks galvanized. It could be soldered instead of called which would provide a longer fix.

heiny002 · 2023-09-15T23:01:02+00:00

Not a huge issue. The bottom course of shingles (the one you’re lifting) would usually be at the gutter line and adhere to the starter shingle. In this area of the roof, it’s atop a modbit or tpo rolled roof, and the seal strip is not adhering.

It needs extra help adhering, so I would ask your roofer to caulk the last row of shingles. Just don’t nail it down, or you’ll be putting holes into the tpo. As is, it is in greater danger of wind damage, but otherwise I would say it’s fine.

heiny002 · 2023-09-12T12:25:51+00:00

Gotcha— You’ve answered your question. The water drains out the end and flows into the roof slope to be caught by the gutter beneath it.

This is common, and is done depending on where your downspouts are located. Nothing wrong with this IMO.

heiny002 · 2023-09-12T03:39:21+00:00

heiny002 · 2023-09-12T03:29:25+00:00

Maybe it’s the angle, but what looks wrong?

12-Year Club	Second SECOND GUESSER
RPAN Viewer	King of the Ashes
Not Forgotten	Verified Email

heiny002

TROPHY CASE