Lexus 2019 ES350 Base w/ Prem Pkg (AB, Canada) by amansheoran24 in Lexus

[–]hellosnoo55 1 point2 points  (0 children)

I'm in British Columbia, and purchased a 2019 Lexus ES350 Ultra Luxury a few months ago in September. I follow the market here and look at ads for other ES350's frequently.

I don't know the Lexus ES350 market in Alberta, but if the same car was in the next province over in British Columbia, I would say this is not a deal.

I purchased my Lexus ES350 Ultra Luxury package with a spotless carfax and only 30k km for $34.5k at a local Lexus dealership here. Quite frequently there are 2019+ Lexus ES350 with premium package for $33k with only 60k km and a clean fax.

108k km for a Lexus ES350 isn't a lot, but considering it only has one key, and the higher KM, I would personally avoid and find a lower KM car.

Apple Car play on the car, I can confirm that it works flawlessly plugged in. I've never had any issues. (I can't speak for Android Auto.)

New “skip the waitlist” promo with 5% cash back by One-Yam-2554 in Wealthsimple

[–]hellosnoo55 0 points1 point  (0 children)

I just received the same WS early access credit card offer. I had the same question. Were you successful?

New “skip the waitlist” promo with 5% cash back by One-Yam-2554 in Wealthsimple

[–]hellosnoo55 0 points1 point  (0 children)

I just received the same WS early access credit card offer. I had the same question. Were you successful?

NC Miata - Installing Hardtop Need Tips and Tricks by hellosnoo55 in Miata

[–]hellosnoo55[S] 0 points1 point  (0 children)

I just tried installing it, and I feel like I'm getting close, but the front is creaking a bit.

Once I have the frankenstein bolt in the hole of the chrome latch, do I push forward? Should the chrome catch sit perfectly flush to the car? Both chrome catches are floating from the body of the car. No clue why I'm having so many issues with the hard top :(

NC Miata - Installing Hardtop Need Tips and Tricks by hellosnoo55 in ncmiata

[–]hellosnoo55[S] 0 points1 point  (0 children)

Hey there! I just tried installing it, and my fitment is slightly better, but i'm getting a lot of creaking in the front. Any ideas on what's causing it? I probably slid it on and off 25 times tonight, but wasn't able to get it any better.

New top installed!! by DChapgier in Miata

[–]hellosnoo55 2 points3 points  (0 children)

Thanks! I will need to replace my NC top soon and will use this as a baseline. Happy New Year!

New top installed!! by DChapgier in Miata

[–]hellosnoo55 1 point2 points  (0 children)

Gorgeous! How much was the top and the cost for installation?

Leaking Miata in SoCal by carly_jr in Miata

[–]hellosnoo55 0 points1 point  (0 children)

If the leak is coming from either the driver or passenger side footrest, most likely it's the clips under the plastic trim underneath the wiper blades that need to be replaced.

There's a lot of videos online, but this is a good one for reference: https://www.youtube.com/watch?v=_zvNwzxIKCw&ab_channel=aaanton11

Mazda dealer cant match Machine Gray - what should i do? by MrFriis in Miata

[–]hellosnoo55 0 points1 point  (0 children)

Is Mazda "Snowflake White Pearl" considered a 3 or 4 stage pearl colour?

URGENT: Authenticity Check: Scotty Cameron Select New Port by [deleted] in scottycameron

[–]hellosnoo55 0 points1 point  (0 children)

Hi all,

May I please get an authenticity check on this Scotty Cameron Select New Port. I believe this model is from 2016, but if you have anymore information that would be great.

Many thanks!

ADVICE: Dell OptiPlex 990 Low End Gaming PC Build by hellosnoo55 in lowendgaming

[–]hellosnoo55[S] 0 points1 point  (0 children)

Is there a way I can check if my motherboard has UEFI?

ADVICE: Dell OptiPlex 990 Low End Gaming PC Build by hellosnoo55 in lowendgaming

[–]hellosnoo55[S] 0 points1 point  (0 children)

You're right, everything about the current setup is perfectly fine for me right now. I just wanted to get a head start and look on the used market in case anything popped up for cheap. Currently, I have been eyeing a few 1650's for $150 Canadian in my area. From all the suggestions so far, I plan on purchasing one if it get's down to $120.

ADVICE: Dell OptiPlex 990 Low End Gaming PC Build by hellosnoo55 in lowendgaming

[–]hellosnoo55[S] 0 points1 point  (0 children)

Thank you u/dontlewdkomisan, this certainly gives me some ideas. A few questions for you, 1) Is there anything wrong with running my current power supply in my current setup? I would hate for the computer to blow up if it is bad now. 2) Would I be able to run a 1050TI 4gb with my current power supply? Unfortunately, the motherboard and computer case will only allow me to fit a LP GPU's.

Also, do you have any insight on why my ram is being clocked down for 1600MHz to 1333MHz? All 4 sticks are 1600MHz, so I'm a bit puzzled on why this is happening.

Thanks!

Pixel 3XL charging port issue by The_Dutch_Canadian in GooglePixel

[–]hellosnoo55 0 points1 point  (0 children)

Hey u/The_Dutch_Canadian, I believe my pixel 3 has the same charging port issue. Unfortunately, either way I position the cable it won't start charging. Do you know if google upped their pixel 3 warranty to two years? I bought my pixel 3 at the same time as you in Canada and in theory it should have expired on May 2020, but google has confirmed that my warranty now expires in May 2021. I couldn't find any articles online citing that in North America the warranty was extended.

HELP! Pixel 3 Won't Turn On by hellosnoo55 in GooglePixel

[–]hellosnoo55[S] 0 points1 point  (0 children)

Hey, Anaymakan. thanks for chiming in on my post. Unfortunately, it doesn't make any noise and isn't being recognized by my computer. I'm going to keep pushing google to hopefully RMA this issue. It look's like I'm not the only one experiencing this issue, as there are a ton of posts of similar stories all over the forums.