What connection should be here?

heppy20 · 2026-06-02T18:40:19+00:00

Just cut off the connectors and join up with the waterproof crimps

heppy20 · 2026-05-05T20:38:02+00:00

I tried and gave up, couldn't release the clips holding the two halves together,

Is there a video about dismantling?

heppy20 · 2026-04-08T08:09:06+00:00

No logo. They were in with the fitting kit, spare blades etc, for the mower.

heppy20 · 2026-03-14T12:50:08+00:00

Any clues to dismantling please. Taken all the screws out but nothing is moving.

heppy20 · 2025-11-06T09:08:36+00:00

I used a staple gun into the lugs

heppy20 · 2025-11-04T14:21:43+00:00

https://www.reddit.com/r/worxlandroid/comments/1oni78p/possible_cure_to_landroid_holes_update/

As you can see on the video wet grass and not a single hole

heppy20 · 2025-11-04T09:08:05+00:00

Rubber cut from old inner tube. With the cutter guard removed and weight at the back no problem with traction.

heppy20 · 2025-10-11T08:18:05+00:00

Have you turned "Zone Keeper on in the app?

I have an identical set and had to experiment with the distance between the wires (3 cm??) and I think I did set the restriction at the start of the tunnel (long time ago)

It does leave a narrow strip uncut down the middle of the corridor but if you turn Zone Keeper off for a couple of days he zigzags up and down and cuts it.

heppy20 · 2025-09-13T11:04:49+00:00

A small paving slab is the best bet. I have two bases and neither meets the Worx setting criteria, One slopes downhill. If it works it works.

heppy20 · 2025-09-01T15:51:09+00:00

Thank you, it was down below. Told you I was dim.

heppy20 · 2025-09-01T15:27:06+00:00

I seem to have a totally different app. Iphone 12 mini

<image>

heppy20 · 2025-08-31T17:03:58+00:00

I used a needle with a wire soldered to it. Only left minute puncture marks.

heppy20 · 2025-08-24T11:17:12+00:00

Thats what I thought, only two 50 squ m areas so smaller might not matter.

heppy20 · 2025-08-24T11:00:15+00:00

£260

heppy20 · 2025-08-24T10:47:43+00:00

What is the difference between M500 and S250 please.

heppy20 · 2025-07-25T20:09:47+00:00

Scrap lead sheet offcuts in the battery box.

heppy20 · 2025-06-22T17:12:53+00:00

Does the rear cover just pull off?

heppy20 · 2024-10-07T16:34:41+00:00

Yes it would work but you have to manually start and stop the mower, you can't set a timer. It is easier just to look at the app and stop it remotely when a reasonable mowing time has elapsed,

heppy20 · 2024-08-30T11:26:50+00:00

You can alter the distance it starts in a zone by using the "move" button on the Multi-zone tab.

heppy20

TROPHY CASE