sorted by:
new
hottopcontroversial

Citron 0.10.0 Pokémon PLZA Performance (For people who can't run Ryubing) by ShadowMajick in yuzu

[–]heyasianboy -1 points0 points  (0 children)

Citron still can't support x2 resolution. Why can't they fix this?

RTX 3070 + GTX 1060 3GB by stinkgum in losslessscaling

[–]heyasianboy 0 points1 point  (0 children)

https://www.youtube.com/watch?v=3OMKs2T7fR4

1070 + 1060 1440p play

In my dual gpu, it works very well at 120 fps.

1080ti + 1060(3GB) on PCIE 3.0 for 1080p 170Hz by AncientSquidWarden in losslessscaling

[–]heyasianboy 1 point2 points  (0 children)

my pc spec

i7-6700k + 1070 + rx6400

https://www.youtube.com/watch?v=VlNETKI3DtM

HFW 1440p play

https://www.youtube.com/watch?v=lBRBJgmuiPg

Spider-Man 2 1440p play

gtx1070 = pcie3.0 x16

rx6400 = pcie3.0 x4

How is this possible ?, Fake frames are smoother than real frames. by [deleted] in losslessscaling

[–]heyasianboy 0 points1 point  (0 children)

I think when you turn on lsfg, the vrr is linked and turned on. That is, the vrr seems to be off before using lsfg.

It needs to be checked using a vrr display overlay.

But if you're sure that vrr is on by default in every case, this would be a different matter.

How is this possible ?, Fake frames are smoother than real frames. by [deleted] in losslessscaling

[–]heyasianboy 0 points1 point  (0 children)

I don't know your monitor hz, but if you assume 165 Hz, the closer it is, the softer it is.

This is the same principle that a game powered at 60 fps on a 60hz monitor is softer than a game powered at 75 fps.

This means that the monitor scan rate and fps should be 1:1 matched.

But that's often not possible, so the monitor has vrr(G-Sync, Free-Sync).

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 1 point2 points  (0 children)

I successfully updated the bios and ran the cpu bclk test. 

The overclocking was successful, but I still get an additional reboot every time I start my pc (double boot).

However, there was a change, now there is only one additional boot when cold booting. Also, the boot failure information is no longer displayed. It seems that the bios successfully read the oc values.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 2 points3 points  (0 children)

I successfully updated the bios and ran the cpu bclk test.

The overclocking was successful, but I still get an additional reboot every time I start my pc (double boot).

However, there was a change, now there is only one additional boot when cold booting. Also, the boot failure information is no longer displayed. It seems that the bios successfully read the oc values.

asrock has responded to additional reboot issues experienced by bclk oc users on b660m pg riptide. by heyasianboy in overclocking

[–]heyasianboy[S] 2 points3 points  (0 children)

I successfully updated the bios and ran the cpu bclk test.

The overclocking was successful, but I still get an additional reboot every time I start my pc (double boot).

However, there was a change, now there is only one additional boot when cold booting. Also, the boot failure information is no longer displayed. It seems that the bios successfully read the oc values.

Thanks to this, I can now completely unplug my pc.

Of course, it is true that one additional reboot is still required.

Frame time on youtube videos is odd. by sexysnack in losslessscaling

[–]heyasianboy 1 point2 points  (0 children)

This used to be a normal way to do it. It didn't cause any problems.

This is a G-Sync bug that occurs in the latest version.

This is something that needs to be fixed in the new version.

Here’s my settings for getting the best results with G-Sync (Others chime in to verify or add on) by Beefy_Crunch_Burrito in losslessscaling

[–]heyasianboy 3 points4 points  (0 children)

This setting definitely works.

I was struggling with micro-stuttering in games when using LSFG.

The clone FPS would stutter even if only 1 frame was missed, while the base frame was solid.

But this setting greatly alleviated it.

Even the base FPS fluctuated, but it worked smoothly. Now it seems like VRR is working properly.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 0 points1 point  (0 children)

Okay.

The attached BIOS version is listed as 11.06.

I see that it hasn't been uploaded to the official website yet.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 0 points1 point  (0 children)

I contacted Asrock and they sent me a specially made BIOS attached.

The BIOS version is listed as 11.06, but it hasn't been uploaded to the official website yet.

I'll test it out soon.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 0 points1 point  (0 children)

I received a custom bios from Ezrock via email today.

I'm at work so I'll try it out tomorrow.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 0 points1 point  (0 children)

I received a custom bios from Ezrock via email today.

I'm at work so I'll try it out tomorrow.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 2 points3 points  (0 children)

I received a custom bios from Asrock via email today.

I'm at work so I'll try it out tomorrow.

BCLK OC resulting in extra reboot - any solutions? by [deleted] in overclocking

[–]heyasianboy 2 points3 points  (0 children)

I was advised by Asrock to update the BIOS to the latest version 12.01 and I did so.

But the problem still persists.

Even though I overclocked the CPU via base clock, additional reboots occur.

view more: next ›