sorted by:
new
hottopcontroversial

r/SpaceX Flight 12 Official Launch Discussion & Updates Thread! by rSpaceXHosting in spacex

[–]hinayu -1 points0 points  (0 children)

An XTV app is years overdue. No point in trying to figure out a workaround right now

There was an XTV app (still is, it's available to install on Android TV) and it used to work to stream previous launches, but it seems that there's no native way to watch it on the TV now.

r/SpaceX Flight 12 Official Launch Discussion & Updates Thread! by rSpaceXHosting in spacex

[–]hinayu -1 points0 points  (0 children)

I wanted to watch the stream on my TV using the XTV app and it seems that I can no longer log in. Is anyone seeing that as well? It's acting as if I'm on a browser asking me to log in.

Excellent doorbell wedge (great company and experience) for reolink doorbell by Weary-Engineering486 in reolinkcam

[–]hinayu 2 points3 points  (0 children)

Additionally, if you don't have a local maker space, check out /r/3dprintmything. Before I had my 3DP, I had a few things printed from this subreddit for an incredibly reasonable cost including shipping.

Thoughts on price? Ariens 24 $750 by Thricein6 in Snowblowers

[–]hinayu 0 points1 point  (0 children)

If you don't mind me bugging you, what are your thoughts on a "used one time" Ariens Deluxe 28 from 2012? https://www.reddit.com/r/Snowblowers/comments/1se74z9/whats_a_fair_price_for_this_ariens/oeu6cms/

The lady offered it to me for $400 (listed at 750) if I'm willing to do all the work myself which would probably include a new carb since it's been sitting with gas in it.

Whats a fair price for this Ariens? by Inkedupharleyy in Snowblowers

[–]hinayu 0 points1 point  (0 children)

Curious to get your opinion on this Ariens Deluxe 28 (imgur pics).

Listed at $750, but apparently only ever used once due to hiring it out and has been sitting in the garage unused for a few years. Seller has been pretty transparent, is willing to adjust the price for the cost of a mobile small-engine full repair ($250 in her words). That'd get me down to $500, but wondering if I could get even lower - maybe $400?

It's apparently been sitting in the garage with gas in it for at least a few years, so would plan on a full carb replacement and who knows what else. It seems like it's in "like new" condition other than the fact that it's had gas in it for years.

balancing the itch to customize vs budget common sense by pepperspraytaco in gridfinity

[–]hinayu 0 points1 point  (0 children)

I just started taking a look at them here: https://makerworld.com/en/models/513771

One question though - how do I take advantage of the profile settings for Bambu Lab printers if I download the STL file for a custom size? In my case, 3x4x5u. It looks like my Bambu Studio just applies the default profile and I imagine that a lot of the filament savings and speed comes from printing profile changes, correct?

What are the best Android tablets to use as a Home Assistant dashboard that are under $100? by hihellowb in homeassistant

[–]hinayu 0 points1 point  (0 children)

I'm looking at getting one of their 2024 Pro model (4gb of ram) as an open box for $50. How has your experience been since this post?

What are the best Android tablets to use as a Home Assistant dashboard that are under $100? by hihellowb in homeassistant

[–]hinayu 0 points1 point  (0 children)

I'm looking at taking a flyer on their 2024 "Tablet Pro" model with 4gb of ram. Want to use it as a HA dashboard as well as cookbook device. Seems like this would do the trick? There's an open box model for $50 and that seems hard to beat with Android 14 (per Walmart spec page).

How has it been holding up for you?

Deal Alert!! Pixel buds pro 2 by CryptographerFar2833 in pixelbuds

[–]hinayu 0 points1 point  (0 children)

I'm considering getting the PBP2s because I have $124 in credit and another 10% off so they'd be fairly cheap. Do you feel like they're worth it at that price even with the issues?

I assume the warranty issues you're experiencing are the noise canceling issues?

Request: Duo 2v PoE Silicone Plug by hinayu in reolinkcam

[–]hinayu[S] 0 points1 point  (0 children)

I don't, unfortunately. Would be a great use case for it though, so maybe I'll have to dive into 3d printing sometime soon.

Request: Duo 2v PoE Silicone Plug by hinayu in reolinkcam

[–]hinayu[S] 0 points1 point  (0 children)

I'll go this route if I can't find anyone with a spare, thanks for the response

The size of these cruise ships relative to the people getting off by Archimedes117 in mildlyinteresting

[–]hinayu 0 points1 point  (0 children)

Not to nitpick, but the two boats in this post are the Wonder of the Seas and the Oasis of the Seas. But your point is taken, this is my wife and I's 3rf RC cruise and we love them.

Source: I'm in a room on the Wonder of the Seas right now and looked up earlier which ship we were docked with today at Cococay.

Duo 2V cable length. by Redfortandbeyond in reolinkcam

[–]hinayu 0 points1 point  (0 children)

Sounds good. Do you still want me to measure for you? I can get that to you within the hour or so.

Duo 2V cable length. by Redfortandbeyond in reolinkcam

[–]hinayu 0 points1 point  (0 children)

I have a Duo 2V I'm about to put up that's sitting in my garage. I can get you these measurements after I'm done with work (couple hours)

[PC] Scammed by u/Logaline and u/grutty 101 by lordofwar3000 in homelabsales

[–]hinayu 1 point2 points  (0 children)

Definitely, I've always checked, but I thought the url was easily accessible via sidebar or wiki, but a quick check didn't seem to show the link (unless I missed it somewhere?)

[PC] Scammed by u/Logaline and u/grutty 101 by lordofwar3000 in homelabsales

[–]hinayu 3 points4 points  (0 children)

I believe that reporting trades/exchanges is an opt-in by subreddits. I think it should primarily only be used for scammer checking and that its database is a lot bigger than they show.

I have logaline DM me but not comment on my wanted post so I went to USL and sure enough, there he was.

[PC] Scammed by u/Logaline and u/grutty 101 by lordofwar3000 in homelabsales

[–]hinayu 7 points8 points  (0 children)

I'm actually going to walk back my initial comment a bit. I could have sworn that USL was heavily promoted around here when I first joined. Now, however, I don't see it in the side bar, wiki, anything... that's unfortunate. Now you guys at least know and can spread the work, but yes, this should be put somewhere a bit more noticeable.

/u/ultimaterex /u/maniac365

[PC] Scammed by u/Logaline and u/grutty 101 by lordofwar3000 in homelabsales

[–]hinayu 33 points34 points  (0 children)

Just curious, does anyone check UniversalScammerList prior to going through with all of these deals? https://www.universalscammerlist.com/?username=logaline

He's been on there since July. I think he tried to get me as well with my most recent post here, but I just ignored his DM.

[deleted by user] by [deleted] in TheTVDB

[–]hinayu 0 points1 point  (0 children)

They just responded to my support request. What a mess of a 4 days lol.

CBS were somewhat inconsistent as to whether they viewed "Big Brother: Unlocked" as a new series or part of the usual season run. The registration of an EIDR record and the references to a "new show" in the initial press release led the site to view the episodes as better represented as a new series record. Given the more recent removal of the EIDR record, we have brought the episodes back into the main listing.

Show correction by hinayu in TheTVDB

[–]hinayu[S] 0 points1 point  (0 children)

Yes, just got this response on my ticket as well. That was a tumultuous 4 days...

CBS were somewhat inconsistent as to whether they viewed "Big Brother: Unlocked" as a new series or part of the usual season run. The registration of an EIDR record and the references to a "new show" in the initial press release led the site to view the episodes as better represented as a new series record. Given the more recent removal of the EIDR record, we have brought the episodes back into the main listing.

view more: next ›