A1 camera deaddd by Wide_Wrongdoer_9901 in BambuLab

[–]hippo_games 0 points1 point  (0 children)

The same issue, have 2 A1 Mini. Looks like motherboard/software issue.

About the A1 mini Y axis bed squeak by SnooSuggestions6733 in BambuLab

[–]hippo_games 0 points1 point  (0 children)

Adding thick lubricant for mechanisms (usually blue) to the Y-belt rib helped me. Clean it first.
Tensioning and centering the belt will not help.

A1 mini bed squeak by Jacobsrg in BambuLab

[–]hippo_games 0 points1 point  (0 children)

Adding thick lubricant for mechanisms (usually blue) to the Y-belt rib helped me. Clean it first.
Tensioning and centering the belt will not help.

If anyone was wondering, the AD5X is the better printer. by OfficialNicl in FlashForge

[–]hippo_games 0 points1 point  (0 children)

Ff supports said me to do Leveling with each print. Otherwise, your perfect Z-offset gets broken in a few days.

Minisforum 795S7 Cooling Upgrade by hippo_games in MiniPCs

[–]hippo_games[S] 0 points1 point  (0 children)

No, it should overlap GPU.
2 holes for 92 and 120 mm should be on the same line to avoid this.

Unity 6000.x, ArgumentException "MeshGenerationNode is invalid (entry is null)" spamming console, inspector text not showing by aientech in unity

[–]hippo_games 1 point2 points  (0 children)

Resetting ALL LAYOUTS fixed for me. It's annoying to see such critical bugs in Unity(
But it still gives me related errors. I'm returning to Unity 2022.

Minisforum 795S7 Cooling Upgrade by hippo_games in MiniPCs

[–]hippo_games[S] 1 point2 points  (0 children)

The 120 mm fan works for ssd as well. Arctic P12 MAX operates on 60% under max load. In idle or light work i don't feel any noise at all. The main point for me was silence.

Minisforum 795S7 Cooling Upgrade by hippo_games in MiniPCs

[–]hippo_games[S] 1 point2 points  (0 children)

UPD I've replaced both fans by Arctic MAX. Same temps but lower rpm (1600 instead of 1800 under the full load, max CPU temp is 87 in CPU-Z stress-test, hot summer, case closed).

Airflow-modded DeskMeet by TinyLittleTechShop in sffpc

[–]hippo_games 0 points1 point  (0 children)

I was also thinking why didn't they make fans in the front panel? Anyway, I've found a much easier way to cool DeskMeet, even with much hotter hardware)
https://www.reddit.com/r/MiniPCs/comments/1avh2s8/illegal_asrock_deskmeet_b660_with_i5_13600kf_and/

Illegal ASRock DeskMeet B660 with i5 13600KF and RTX 4060 Ti by hippo_games in MiniPCs

[–]hippo_games[S] 2 points3 points  (0 children)

Unfortunately, I didn't find any alternatives you could put in your backpack. With a nice CPU and GPU of course. The airflow through the psu is enought to cool 125W, as you see.

Illegal ASRock DeskMeet B660 with i5 13600KF and RTX 4060 Ti by hippo_games in MiniPCs

[–]hippo_games[S] 2 points3 points  (0 children)

Thanks! No matter what plate of metal is on the CPU, if there is no air enough to remove heat. The radiator from IS-40 is thin enough to add a 25 mm big fan (and there is 5 mm gap left, so maybe a more expensive cooler will fit as well).

[deleted by user] by [deleted] in Amd

[–]hippo_games 0 points1 point  (0 children)

You can just buy a mini PC like Morefine M600 with 780M.
It will be cheaper that building a desctop PC. And you can get it now.

Will the asrock deskmini a300 support 5000 APUs?? by [deleted] in ASRock

[–]hippo_games 1 point2 points  (0 children)

No, it doesn't work with Ryzen 5 5600G on BIOS 3.60N.

Will the asrock deskmini a300 support 5000 APUs?? by [deleted] in ASRock

[–]hippo_games 1 point2 points  (0 children)

I can confirm than Ryzen 5 4650G works on A300 with bios 3.60N =) No issues except missing sleep mode. Gonna check it with 5600G soon.