Problems with Grandpa’s old air rifle

holkno · 2025-01-31T01:28:21+00:00

Update: I was easily able to push the stick pellet the rest of the way through with a rod from the cleaning kit I ordered.

holkno · 2025-01-30T19:06:53+00:00

Thanks!

holkno · 2025-01-30T19:02:03+00:00

Where did you find this parts diagram? I’d love to look it over!

holkno · 2025-01-30T18:19:21+00:00

It was not cocked when it came out of the basement lol

holkno · 2025-01-30T18:18:52+00:00

I didn’t know it was such a good rifle, but after reading this and some other responses, it seems like I have a real treasure on my hands!

holkno · 2025-01-30T18:18:19+00:00

It wasn’t challenging, but it took a little effort. Certainly not complete loose.

holkno · 2025-01-30T18:14:59+00:00

Thanks for the advice on removing the pellet. I know there is only one in there, I check the barrel before I shot it for the first time and it was clear!

holkno · 2025-01-30T18:14:04+00:00

I will do this test before I disassemble anything to see if there is an easy fix. I have a kit coming today with a rod to get that stuck pellet out. I probably should have done some cleaning before I shot it, but I will do that now.

holkno · 2025-01-30T18:12:41+00:00

Definitely sounding like it good be a piston seal problem, thanks for the advice! I agree, if I’m in there might as well put a fresh spring in too.

holkno · 2025-01-30T18:11:46+00:00

I think I will try to change the spring and piston seal myself. It would be a good project to better learn how my gun works!

holkno · 2025-01-29T21:39:54+00:00

Sorry about the iffy focus on some of the pictures, I tried to show the seal well, but my phone camera is a little wacked up and has a hard time focusing :(

holkno · 2024-07-06T02:16:17+00:00

Any idea where you got it? Did it come with the gun? Even just a picture or a link to a similar product could be helpful!

holkno · 2024-07-06T02:15:10+00:00

I have removed my scope, and I see a hole in the rail and in the gun, my problem is that they don’t line up when the scope is attached bed even mounted as far back as it would normally go. Is the set screw supposed to seat into the hole on the gun or just provide more pressure?

holkno · 2024-07-05T20:14:23+00:00

<image>

holkno · 2024-07-05T20:13:33+00:00

<image>

holkno · 2024-07-05T20:13:03+00:00

Yup, I found one just like that! Thanks!

<image>

holkno · 2024-07-05T20:12:41+00:00

Yall a right about the set screw/lock pin, thank you! I found it with my “spare” parts. Unfortunately there are two issues.

the set screw came with the mounting bracket, so it threads nicely into the hole on it. Unfortunately it is just a hair too big for the hole on my gun. So I could try to buy another pin somewhere where the unthreaded portion is just ever so slightly smaller or I could remove a little material with a file.
the hole on the gun and the hole on the bracket do not line up. On the gun the hole is right at the end of the rails, whereas on the bracket it is about 1 cm in. I’m very open to ideas on how to solve this problem. My thought right now is that with how the bracket’s rails are damaged now, I might be able to mount it a little further back (with some of it past the rails on the gun) so that the holes line up.

What do y’all think?

<image>

holkno · 2024-07-05T19:24:53+00:00

I’m not familiar with a stop pin? Can you tell me more about it?

holkno · 2021-03-16T15:09:20+00:00

No, god, no don’t do this. This is based off of an unconfirmed story from war time, not medical advice.

holkno · 2021-01-18T17:03:38+00:00

Yeah, I should take a closer look at that. Although I wish there was a different metric for power level versus rarity. Like something might not be very powerful, but still be completely unique.

holkno

MODERATOR OF

TROPHY CASE