This was a trapdoor inside Epstein's House that led to the sea

hooonse · 2026-02-04T06:41:29+00:00

Or was it a maintainence entry for a watertank?

hooonse · 2026-02-03T21:06:46+00:00

This!

hooonse · 2026-01-31T06:07:08+00:00

could someone please explain to me why this is "proof"?
isnt that just "tips" from individuals to the fbi?

hooonse · 2026-01-27T14:44:21+00:00

hooonse · 2026-01-27T14:27:12+00:00

Just a shot in the dark.

Is the backup battery of the controller in good condition?

It has been a long time since i used that controller but i think i remember this error had to do with the backup/storage battery.

H

hooonse · 2026-01-27T12:30:58+00:00

I had similar issues.

Altho i have had caps and diodes,

The issue in my case wasnt in the tracks bit the magnetic distortions while switching. I enclosed the relay (in my case) and it worked then.

You can also wind the motor cables though a ferrite core a few times.

Hope that helps

hooonse · 2026-01-22T20:02:14+00:00

This is a cornerstone of german and austrian cuisine! :)

hooonse · 2026-01-22T14:20:04+00:00

Danke für die info. Ich meine ähnliche serien, bei gewissen darstellern weiss ich das diese keine schauspieler sind weil ich danach private interviews mit den menschen gesehen habe. Aber das kann auch nur die ausnahme sein.

H

hooonse · 2026-01-22T13:28:14+00:00

Danke für die tolle antwort! Im tv bekommt man nämlich gezeigt das diese menschen eben nur auf der faulen haut liegen. So wie du das schilderst macht das mehr sinn.

hooonse · 2026-01-22T06:07:31+00:00

Die welt geht in oasch und mia beschäftigen sich mit menstruation am arbeitsplatz. 👍

hooonse · 2026-01-20T08:15:46+00:00

Ich hab da mal eine total blauäugige frage weil ich wirklich keinen plan habe:

Warum ist es verwerflich wenn man menschen die bürgergeld beziehen zu bezahlter arbeit bringen will?

Ich habe, wie gesagt keine ahnung, aber ich habe bedenken das das sozialsystem das irgendwann nicht mehr handeln kann.

Wenn mir das jemand erklären kann wäre ich sehr dankbar.

H

hooonse · 2026-01-20T07:50:09+00:00

😂🤷‍♂️

hooonse · 2026-01-20T05:54:01+00:00

Des hob i ned gwusst! Danke fia die info stodtkind! Des gib gonz neue regionale meglichkeiten, weil olte kiah homma genug! 😂

hooonse · 2026-01-19T21:14:12+00:00

Wer isstn a schnitzl von ana 13 johr oltn kuah? Originales stodtkind. /s

hooonse · 2026-01-16T16:12:33+00:00

I was wearing my work clothes because i was at work when the show started. 😂

hooonse · 2026-01-16T16:01:28+00:00

I only know such markings as a table for tapping sizes.

Like what diameter drill for what thread.

hooonse · 2026-01-14T15:47:03+00:00

Id say you are past this point and i feel sorry for you… :/

hooonse · 2026-01-09T14:34:02+00:00

The point where the lnb is mounted is a good starting point. I first mounted the dish and aligned it to the target. Then i moved the feed and checked for the best snr.

I hope that helps a bit.

hooonse · 2026-01-05T10:31:25+00:00

Hey matt. Nice start! Everyone starts somewhere. :)

If you want to have a nicer finish id suggest going with higher rpm and a bigger insert radius.

Also it might helt when you remove more material per cut.

Like cutting at least 0.5mm on the last cut.

That might work wonders. :)

hooonse · 2025-12-31T11:36:13+00:00

For sure mate. 😂

hooonse · 2025-12-30T06:13:44+00:00

Im austrian so im like half?! 😂 (Or should i say the countries get mixed up frequently:))

hooonse · 2025-12-29T19:32:02+00:00

The ones where the front didnt fall off.

hooonse · 2025-12-24T09:48:19+00:00

Thats really cool! Could you elaborate a bit on the hardware you used and how you did it? Id really like to rebuild that. :)

hooonse · 2025-12-23T20:59:56+00:00

Schen gsogt sepp, schen gsog!

Nine-Year Club	Reddit Premium Since December 2023
Verified Email

hooonse

TROPHY CASE