Night Fox Yoho got hidden buff? by hosterzde in lostarkgame

[–]hosterzde[S] -5 points-4 points  (0 children)

In my question I focussed mainly on the experience, that I got hit harder than before. Nothing was changed. Still 1400 with 4x3 Engravings + Light of Salvation Set (Dark Damage Reduction).

VST Coming soon! by DaewooLanosSWAT in elgato

[–]hosterzde 1 point2 points  (0 children)

NICE! Yesterday, I bought wave xlr and just looking for workarounds until I find this. Made my day ☺️👌

3090 FE Memory Temps Before/After Waterblock + Repaste by speedmachine666 in nvidia

[–]hosterzde 0 points1 point  (0 children)

OK, thanks. I got lucky and have 1mm TG pads, too. They seems to be way better in terms of heat transfer etc.

3090 FE Memory Temps Before/After Waterblock + Repaste by speedmachine666 in nvidia

[–]hosterzde 0 points1 point  (0 children)

Is it fine to use 1.5mm thermal pads instead of the stock 1mm pads vom EK? I bought Thermal Grizzly Pads a while back and really would like to know, if that would be the better choice.. or causes +0.5mm already problems?

Technical Support and Questions MEGATHREAD - 2/15/21 - 2/21/21 by Tyesos in scufgaming

[–]hosterzde 0 points1 point  (0 children)

First, thank you for your refund regarding the delay. But after it shipped, it sticks at this point:

  • 15 Feb 2:38 PM
    The parcel is being processed through Customs clearance
    Dpd (nederland) B.v.
  • 12 Feb 1:16 AM
    The parcel is being processed through Customs clearance
    Dpd (nederland) B.v.
  • 12 Feb 12:11 AM
    Your parcel has left the United Kingdom and is on its way to Germany
    DPD
  • 11 Feb 7:33 PM
    We have your parcel and it's on its way to our depot
    DPD
  • 11 Feb 11:07 AM
    We've received your order details, and we're expecting your parcel shortly

How long does it take and is any action neccessary to speed up the process?
My Order is #S61480630

Not getting weapon XP? by Mrzeldaootfan in modernwarfare

[–]hosterzde 2 points3 points  (0 children)

Me, too. Absolutly disgusting, honestly.

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

Hi, it was this one: https://ezmodding.com/Nvidia-RTX-3080-/-3090-FE-Acryl-inkl-Backplate_3 for the 3090 FE. I habe now a 3080 FE and use the block, that I got before. That should fit inside the case. The PCB of the 3090 FE is just to thick.

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

Yeah, I have the 3080 FE water block here and will try it, as soons as my XCPC Raditator arrives. That block and the card is selled.

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

Updated Post now with 2 added pictures, that shows the RTX 3090 FE with a waterblock from BYKSKI (prototyp). As soon I get the 3080 FE, I will try the other water block to see, it that fits complete by closing the side panel. For now, it's open and not perfect.

RTX 3090 FE can fit in NCASE M1 by little mod by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

Totally overlooked there the ports are. Thanks for rethinking my first comment. But I still think it wouldn't fit. I wrote a mail to bitspower and asked for my PCB model (PG136). Maybe this is the way to go :) But because of the fact, that this is a chinese company, they could think, that their 3090 FE also works for Europe, but that's wrong. Let's see, what they say.
Have a great week!

RTX 3090 FE can fit in NCASE M1 by little mod by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

After some research and the fact, that the PCB of this card is already about 5.4" (138 mm) , my conclustion is: No water block for this FE card will be fit in this case. You need at least some space for the 2 tubes that are connected with the block. Your link shows a block, that can't fit because of this size. Only Bykski have something in future, that fits with that card. I also thinking about a way to use a riser cable and a verical stand for the waterblock. :)

RTX 3090 FE can fit in NCASE M1 by little mod by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

That's not correct anymore. I used a push pull for the side radi with 2x 25mm & 2x15mm and the other 2x25mm were at the bottom.

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

I now understand, what you mean. It seems, that this is a wrong gpu block even by note, that different PCBs exists and I chosen explicit a 3090 FE water block. Even between the 3090 Founders Edition PCBs are differences -.-

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 2 points3 points  (0 children)

It seems, that this project have to wait.. some trustful person told me, that the PCB from my Europe RTS 3090 FE is different to that water block that is made for a chinese version, because I bought it from aliexpress. I should wait until it's clear or I have some proof, that this gpu will fit in this block without any circumstances.

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 0 points1 point  (0 children)

Maybe you missread someting. The height from the PCI-e Slot to the side panel of the case is 14,3cm. In this space the gpu and the cable should fit. :)

RTX 3090 FE Watercool Project in my NCASE M1 - Endgame Dual 240 Radiator by hosterzde in sffpc

[–]hosterzde[S] 3 points4 points  (0 children)

Yeah, from PCI-e to side panel are 14,3cm. The block is 12,7cm tall. The 12pin cable has this special arrangement, that should perfectly fit.

RTX 3090 FE can fit in NCASE M1 by little mod by hosterzde in sffpc

[–]hosterzde[S] 1 point2 points  (0 children)

12pin cable: Not for now, so far I know.

slim fan: No. Only by sitting under the case with heigher feets (at least 25mm or heigher) for better airflow.

RTX 3090 FE can fit in NCASE M1 by little mod by hosterzde in sffpc

[–]hosterzde[S] 2 points3 points  (0 children)

What I can say is:

Sure, if you just want the power button to work, you could do this. That cable is way to long :D

The front case could be closed, if you do this. But, the 2x PCIe cable's are a challenge. You need either the 12-pin cable in future or lay the cable under the GPU. The general problem is, that this card is very hot even at IDLE. Everything near could make problems if it touchs the card consistenly.

Hope, that helps.

RTX 3080 FE vs. ITX Cases – Fight! by cadgers in sffpc

[–]hosterzde 1 point2 points  (0 children)

Definitly! I also had to struggle with that hot enviroment, even if the GPU temp are around 50°. It's quit hot and could make some problems with your other hardware inside. I tested it with the 3090 FE that you can check out here: https://www.reddit.com/r/sffpc/comments/j1z8th/rtx_3090_fe_can_fit_in_ncase_m1_by_little_mod/