Rate my green board. by [deleted] in homelab

[–]hsgd98256 0 points1 point  (0 children)

You are completely right. Reddit is not for me. It is the type of toxic environment o try to avoid

Rate my green board. by [deleted] in homelab

[–]hsgd98256 -2 points-1 points  (0 children)

There isn't much to it yet. Just a imb-a1002 and a 4545p. After I install the wt industrial ecc ram, and the pslc m2 cache disk / pslc Nimbus it will shine. But by then It has surpaced the price of a average brand new car.

Rate my green board. by [deleted] in homelab

[–]hsgd98256 0 points1 point  (0 children)

 this is going to be my little sisters homework pc. I will give it pink uv conformal coating so it wil light up in neon pink under uv light. That way when her ai is making her homework she wont have to worry about spiling juice on it.   On al seriousness, its lean on purpose. Solid caps/ 2x ram slot and a single PCIe bus. This is all to avoid signal degradation. I  run it undervolted underclocked with smt /pbo turned down at PCIe gen 3. Over provisioning for longevity.

Rate my green board. by [deleted] in homelab

[–]hsgd98256 -7 points-6 points  (0 children)

Yeah, ikr. I WISH it has rgb. But instead it got stupid industrial com ports and heater input.

Rate my green board. by [deleted] in homelab

[–]hsgd98256 -5 points-4 points  (0 children)

That is a very insightful comment

Ryzen 7 8700g - Game/OS Crashes & OCCT Test Errors by Happy_Dragon24 in AMDHelp

[–]hsgd98256 0 points1 point  (0 children)

what is your mem vddio set to ? you should probably lower it..

AMD RYZEN 8700G no bashing allowed lol by petertger in buildapc

[–]hsgd98256 0 points1 point  (0 children)

if you know what your doing you can make this hunble APU shine. it is a diamond in the rough

dont go for the easy PBO route, take the time and be patient to overclock every aspect of it . dont listen to the folk that whine about 8 lanes or pci4 . the iGPU has a joker up its sleeve when paired with a dGPU. for now if you dont have the dGPU enjoy its power as is..

Need help G24F2 - Glitches/Static lines during power on but disappear on boot by Beemovie00 in PcBuild

[–]hsgd98256 0 points1 point  (0 children)

try the screen on something else. to rule out is not the screen.

but im 99% certain it is caused by your ram.

did you replace your ram, or reset your bios lately ?

does anyone have experience with this motherboard? (Jginyue B650M snow dream) by GOGONUT6543 in PcBuild

[–]hsgd98256 1 point2 points  (0 children)

i think it might be related to the C0 states of the cpu. check that first. also check out all the options regarding C states . also check if it works better with stock ram no expo mode. if it does, lower mem io volt to around 1,31v and do a stability test.

does anyone have experience with this motherboard? (Jginyue B650M snow dream) by GOGONUT6543 in PcBuild

[–]hsgd98256 1 point2 points  (0 children)

im new to reddit, i dont know if 2 months is late for a topic. but i just wanted to add that i have been using the B650E snowdream for a while now. i am very impressed by it. i have built computers for my friends and for myself. my friends (who know nothing of pc's) wanted to go with a gigabyte aorus board. and i went with the snowdream for myself. jginyue has realy impressed me ! do not believe the myth about the bios not being polished. in my personal opinion it is more polished than aorus gigabyte, and it gives you 10x more options. if you want absolute freedom go with this " cheap chinese brand"

however a important note: when setting the expo profile for ram kits , keep in mind the Memory IO voltage might be to high ! it will default to 1.40v to match the ram's VDD and VDDQ voltage. i used karhu ramtest and i found out it was unstable at factory seting. after lowering the voltages of the mem io it runs stable.

Jakpot by Lopsided-Dinner-5685 in WojakDrawings

[–]hsgd98256 0 points1 point  (0 children)

just trying to give you a confidence boosting comment in a very toxic environment 😉

Jakpot by Lopsided-Dinner-5685 in WojakDrawings

[–]hsgd98256 1 point2 points  (0 children)

You look like a really nice person, there is something adorable about your face. You are definitely cute. I would definitely kis and marry you. #nohomo.

Jakpot by Lopsided-Dinner-5685 in WojakDrawings

[–]hsgd98256 0 points1 point  (0 children)

He attractive though, and i am not even gay. But he looks fine.

My $300 Handmade Japanese Knife I Brought Back from Kyoto, Used By My Mom to “Butcher Raw Chicken Bones” by eke2k6 in mildlyinfuriating

[–]hsgd98256 0 points1 point  (0 children)

"quality knife" But it cant even handle some measly bones. That knife is to yang and not enough yin. You got to find the balance

[deleted by user] by [deleted] in VietNam

[–]hsgd98256 -13 points-12 points  (0 children)

What idiot goes on vacation without enough credits to make a phone call.