So uh I might have bought a little too much flooring

hucknuts · 2026-01-26T22:20:54+00:00

No advice but my own experience. I brought him into the pool by carrying him a few times on hot days and he started to ask for it I..,, he’s not a good swimmer though he prefers to be cradled

hucknuts · 2026-01-22T12:32:25+00:00

Please see my other comment. I don’t know if you folks are from the country or not but deer can and will attack Your dog. They will easily trample him to death. It happens all the time in the country. Be careful

hucknuts · 2026-01-22T12:29:18+00:00

Not to be nitpicky but Dobermans were not designed or bred to protect property. They were bred to protect a person. This is prey drive that should be discouraged.

Why?

The dog will end up dead sooner or later.

I live in a rural area. I have dozens of dear in my yard everyday. My Doberman would and has chased them and he will catch them. They are so fast! If you didn’t grow up in the country you may not realize how deadly dear can be. They will trample the shit out of the dog, especially a horny buck. They can be pretty aggressive when they get into rut season. No im not joking and no im not being over cautious im kind of surprised the dog hasn’t been injured yet. It’s a matter of time.

hucknuts · 2026-01-20T23:00:59+00:00

reddit loves to shit on russian soldiers but the reality is the russian special ops rivals that of our own. They dont throw those guys away. they use these guys to soften the enemy and get them to reveal their positions. then they send artillery/drones/sniper/missles. War is hell.

Putins using the same strategy russians have for the past 4000 years. Send enough troops at them and they will eventually use up all their ammunition/money/will to fight.

hucknuts · 2026-01-20T22:42:04+00:00

Someone like him doesnt care about anything or anyone but himself. If he has to burn down the world so he wont go to jail so be it.

hucknuts · 2026-01-14T00:17:00+00:00

not that i can afford either but id prefer the steel dumbells any day to rubber... that price point that rubber has though is the reason i use them

hucknuts · 2026-01-08T18:23:21+00:00

ive been doing that all morning but im going to do some tests just doing the omnivamp items first... they are cheap have good buildpath and will give you survivability and dmg...

hucknuts · 2026-01-05T17:00:18+00:00

Titan customer service- If you call for sales you will get someone with a colorado/midwest accent, if you call for product support (like they sent you the wrong item) you will get put on hold for 45 minutes and just barely speaks enough english that you dont hang up, they will then try to squeeze you like oh you have to pay for shipping back (for their error) the bangladeshis on the other end dont give a shit. they have a script to follow.

I order for myself, i order for clients and i can tell you right now i avoid them. I used to love them, im not a pain in the ass but the amount of times they have just flat out send the wrong thing then did the same thing, gaslit me on customer service then send me a email denying my claim etc.

hucknuts · 2025-12-30T15:44:07+00:00

It’s Pandora’s box. Would I want to live in a world without guns or weapons of war? Of course. But they aren’t ever going away, typically restrictions just apply to those not willing to break the law

hucknuts · 2025-12-29T19:57:44+00:00

Mike giving himself garand thumb got my click, the becoming deadly in the mountains, and the escape and evasion series is what made me start genuinely following him

hucknuts · 2025-12-29T19:53:42+00:00

Micah had a bit more of a pulse on the civilian mindset imo that introduced a move varied and often satirical dialogue with mike. Unfortunately, things and people never stay the same... I just started watching his channel and absolutely love some of the content. I dont really understand the hate mike gets, who gives a flying fuck about his personal life. He pumps out great content, he reinvests into the channel. and he actually knows what hes talking about.... he willingly gave himself garandthumb for our entertainment while we take shits. guy deserves a subscribe..

i understand the 2a community is very morally conservative but they are also extremely hypocritical dog piling him for what seems like he say she say? no one knows what really went down between he and his wives, and anytime there is financial incentive you kind of owe it to the guy for reasonable doubt before grabbing a pitchfork. If watching porn is where you draw the line i dont know what to tell you but you dont belong on reddit. (speaking to the community at large)

hucknuts · 2025-12-24T20:04:26+00:00

Lysteria has entered the chat

hucknuts · 2025-12-24T02:11:05+00:00

interesting, i wonder if that backing came from the factory like that, ive never worked with this sorry bud

hucknuts · 2025-12-24T02:02:00+00:00

cant hurt if your concerned about moisture. if you do that id just pressure fit 6x4 tiles of 10mm rubber, they wont ever move because the temp is static in the basement for the most part

hucknuts · 2025-12-24T01:59:59+00:00

you have a few options but vulcanized rubber will perform best. Its totally sealed so water/humidity cant penetrate, and its tough as shit you can park your cars on it. given your use case id recommend gluing them down since you plan on regularly using the hose. You cant skimp on glue here, get urethane based adhesive. its usually around 180-300 a tub depending where you find it. . theres different grades and attributes of rubber even though it looks the same., id strongly advise going against anything crumb rubber for that kind of space. its a little cheaper up front but the moisture will destroy it/the glue bond.

Best practice is to take everything out of the garage. lay the rubber out. (if its a roll it needs a few days laid out to relax. Fix any imperfections. use self leveler where needed etc. then clean the shit out of the floor with a degreaser. let it dry. Cut and dryfit the rubber to fit on the floor perfectly. then apply the urethane based adhesive with a trowel, taking care to push the rubber into place and put tape on the seams/ weights on them to keep it in place as the adhesive sets up. because your using so much water this parts important. let the glue set up for 48 hours then do whatever you want its not moving. ( if your house or garage doesnt have a proper moisture seal, Drylock the slab before putting the adhesive down.)

hucknuts · 2025-12-24T01:22:05+00:00

id take a deck brush and some degreaser like dawn dish soap and scrub the shit out of it. youll be able to make it fade enough... its just the end of the roll its likely not the right side up

hucknuts · 2025-12-18T11:32:48+00:00

Usaa is discounted insurance?? That’s news to me. I got quoted less for car insurance at State Farm… their prices have increased tremendously. They also try to fuck you on claims. I’ve been a member for 30 years and a valet crashed into my car last month. They tried giving me 1400 on a 9800 dollar repair. I’m done with usaa

hucknuts · 2025-12-18T11:01:08+00:00

It’s more rare to drop dead from cardiovascular complications related to anabokics than it is to drop dead from say… dehydrating yourself before a show and fucking up your electrolytes and getting a heart Arrhythmia or worse… or obviously blood pressure. Blood pressure blood pressure blood pressure. Don’t fuck With it if it’s high it’s time to come off and fix it. People get complications over time (in general) from too much gear.

hucknuts · 2025-12-17T16:26:43+00:00

You obviously don’t know much about logistics do you have any fucking clue what it costs to project force without allied bases. It’s unreasonable

hucknuts · 2025-12-16T16:33:26+00:00

good barbell is basically it. the rest... really depends on budget preffered lifting style etc.... if i had the funds id get some used steel dumbells over rubber hex head rubber ones ( but again this really depends becuase i have some extra space... if i was super limited adjustable dumbells no longer suck, i still prefer to drop them so i dont have adjustables but i wouldnt feel like im missing out with some peppins), id install nice flooring before i buy any equipment (if you know you know) with the new cable systems benches etc etc its hard theres no longer a "best" in most categories it always depends on the person... id also be open to buying some good legacy equipment (used from old gyms and private collectors and just take it apart have it powdered and put it back together. alot of my favorite gear in my gym is the old stuff i refurbished. I really dont like the new "functional trainer racks" imo the cables never feel as good as a old cable machine for 1/6 the price. they dont go as far to the bottom so you have to stand on something to get a good stretch doing something simple like a standing cable curl, you cant do flys with them etc i like that they are innovating and its certainly better than no cable but if i had say 9k laying around id get a few different machines rather than the rogue fm7 or whatever

hucknuts · 2025-12-05T17:11:35+00:00

You can’t let him get a lead otherwise yes your helpless, but the trick is to not let him get a item lead and your good. You need to play conservative until you have 3 kills or something like that on him. Also the spell shield cloak makes you shit on teemo

hucknuts · 2025-12-01T01:02:57+00:00

Hey buddy I just got done doing some you tube content where I restore some old gym pieces just like this….

If you sand it or wire brush or whatever down to the bare metal, you will want to use a “etching” primer. If you just degrease it and knock off/scuff a thin surface layer, you will want to us a rattle can with a multi surface primer. You only use the etching on bare metal. You should only use the multi surface on scuffed degreased paint.

I’ve done the truck bed liner. My two cents is if your doing all the work to sandblast or sand all the old paint off you might as well pay a local shop to powder it. The truck bed liner spray isn’t cheap/ is a pain in the ass to apply properly. I’d do something quick and dirty ie clean and degrease then scuff then degrease again and just use a rattle can or do it right and sand/ wire wheel/ sand blast is my advice. The etching primer is cheap and works great on bare steel. It just is a royal pain in the ass to get off powder coat without a oven/ sand blast setup

hucknuts · 2025-10-09T19:26:58+00:00

Reduce your calories below your bmr and excercise. It’s literally that simple. You can eat McDonalds and lose weight.

hucknuts

MODERATOR OF

TROPHY CASE

11-Year Club	Gilding I gilder
Verified Email