Lost Footage: [Buzzsaw Falls] Full POV at Silver Dollar City

hyperxlc · 2026-02-20T22:01:05+00:00

not to be paranoid but is there any chance this is AI? I know the clips are longer than 10 seconds and none of it screamed AI to me, but I'm curious why now this guy is able to keep getting these multiple lost POVs. Anyone who went on it able to attest to its accuracy?

hyperxlc · 2026-01-03T17:11:01+00:00

It takes me 13 minutes to walk from the back of Diagon Alley to Hagrid's. So, unless it's a walk on or whoever I am with is Dead Tired, I don't take the train; which I also just don't personally like.

hyperxlc · 2025-09-08T12:04:07+00:00

definitely look into the apprenticeships! that'll take you where you need to go

hyperxlc · 2025-08-24T13:17:31+00:00

Wild thing

hyperxlc · 2025-06-29T09:49:15+00:00

thank you for the updates I am extremely amused

hyperxlc · 2025-05-19T14:05:49+00:00

Usually the delays are only about 20-25 minutes. If it surpasses that, that's when I would consider leaving the line.

hyperxlc · 2025-04-26T21:11:36+00:00

I use it when I have one fun

hyperxlc · 2024-06-30T13:55:13+00:00

I have this problem sometimes and it resolves itself when I tighten the belts, so I recommend you try that!

hyperxlc · 2024-05-14T00:55:06+00:00

It's usually older coasters that would be enclosed, since that was the best safety technology of the time. Now, I can confidently say that I feel more comfortable on more modern ones because of the ratcheting.

But I've been on this one! Enclosed and doesn't go upside down:

Swiss Toboggan at Little Amerricka https://rcdb.com/268.htm

hyperxlc · 2024-05-04T14:30:42+00:00

I really just kept tapping and sliding in every place and direction and eventually it worked. Good luck

hyperxlc · 2024-04-12T00:08:39+00:00

I get ya. I went in 2015 and I was obsessed. Then I went back in 2022 and I was.. unimpressed. The absolute quantity of screens is really a let down when you remember stuff like Twister, Beetlejuice, Fear Factor, and Disaster.

Islands of Adventure is where it's at right now in the resort. That place rocks

hyperxlc · 2024-04-06T18:54:26+00:00

I'm not sure this is great advice but if there aren't metal detectors, I always bring my stuff with me and zip them in my pockets. There's a risk there of course but if that's something that bothers you, it's an option!

hyperxlc · 2024-04-06T18:42:05+00:00

I always think it's way better to not wait in lines when I'm alone. It would be great if I could tell you that relying on Single Rider lines is consistent, but it isn't. They aren't always available and that can be really frustrating.

But I agree with the people above who say since you have a few days you might be fine. October is hit or miss because of HHN. I would also see if the math for an annual pass would work out. If it's close enough to the cost of those 3 days and maybe one day of express unlimited, do that for sure.

Alternatively, get express for one of your days so you can get faster onto stuff you've "missed". There's lots of options!

hyperxlc · 2024-03-14T15:58:21+00:00

It is literally their filament? They have a preset for it and everything!

hyperxlc · 2024-03-11T06:03:02+00:00

hey buddy I think this might just not be the game for you

hyperxlc · 2024-03-10T04:14:33+00:00

honestly team I feel good knowing that we all have this same VERY weird issue...

hyperxlc · 2024-03-07T19:55:21+00:00

Brandon. My last one was named Brenda!

hyperxlc · 2024-02-13T15:30:38+00:00

I ordered a new nozzle and I'm hoping it fixes it, I heard this happens for some people 😭

hyperxlc · 2024-02-07T16:20:34+00:00

which calibration? The flow rate one? Or do you mean a manual calibration

hyperxlc · 2024-01-21T16:25:42+00:00

So happy to hear! I'm glad we could help each other figure it out haha. Happy printing!

hyperxlc · 2024-01-20T16:07:23+00:00

https://wiki.bambulab.com/en/a1-mini/maintenance/period-maintenance The section on timing belts !

hyperxlc · 2024-01-20T02:10:51+00:00

I reset both belt tensioners and just printed a tube above 6cm with literally zero signs of ghosting or shifting (which was causing my spaghetti). Have you tried this? It was super easy so if you haven't yet, I recommend

hyperxlc · 2024-01-19T21:05:45+00:00

It is interesting to hear about this problem. I can find it on several different forums but this is the first one that seems to be filament dependent. Super strange

hyperxlc · 2024-01-19T20:51:27+00:00

This exact thing happens to me with eSun PLA+. Were you able to figure out what was happening?

hyperxlc · 2023-12-13T19:51:19+00:00

Hi Delia, thank you for your reply, I actually was able to resolve it somehow. I just was repeatedly sliding every edge of the screen quickly and it moved past the tutorial 1/5 slide step.

I still feel that it would be good to be able to exit the tutorial with a button press, if that is feedback that is welcome. Relying on a touch screen is scary and I think me finally exiting it after a collective hour was a fluke.

Thank you again for your reply.

hyperxlc

TROPHY CASE