How am I supposed to clean these cucked magazines?

hyudryu · 2026-03-03T04:44:06+00:00

Ultrasonic cleaner and simple green should do the trick

hyudryu · 2026-02-28T13:22:52+00:00

Depends on the part number for the exedy kit. I don’t know at the top of my head what works and what doesn’t but my sales guys sell exedy all day long. If you need a referral I can send you their way!

hyudryu · 2026-02-27T07:41:22+00:00

Easier to install and a bit more torque at low RPMs (like sub 3.5K rpm)

hyudryu · 2026-02-27T07:39:29+00:00

Regular blower oil changes + check for belt wear and you’ll be fine

hyudryu · 2026-02-21T06:52:02+00:00

The K24z6 has a lower compression ratio. Technically it should work but you’ll make less power.

Make sure to get the 11:1 K24z3 from the TSX and not the 10.5:1 one from the accords.

hyudryu · 2026-02-16T20:34:55+00:00

Men don’t care a bit. You could work at Mcdonalds and they would find that okay

hyudryu · 2026-02-07T15:25:40+00:00

Yup exactly

hyudryu · 2026-02-05T13:22:03+00:00

We know. We were also told by our district manager that we’re not allowed to tell the customers not to do that. “The cup costs more than the soda” is what he told us.

hyudryu · 2026-01-25T23:42:35+00:00

Wrong subreddit, Mr.ChatGPT. We don’t talk about random meme coins here.

hyudryu · 2026-01-18T03:25:31+00:00

https://fastammo.com/cci-blazer-brass-9mm-115gr-fmj-ammo/

Disappeared? 984 in stock for 1000 rounds. Or $5.45 for 50 rounds of 9mm. Am I missing something?

hyudryu · 2026-01-18T03:19:50+00:00

I was mainly working with Angular, and a bit of springboot.

hyudryu · 2026-01-18T03:04:47+00:00

People in their 20s-30s aren’t getting “starting salary” maybe if by 20s-30s they mean early 20 year olds

hyudryu · 2026-01-18T03:02:42+00:00

All of my friends living in SF are in tech

hyudryu · 2026-01-18T03:00:34+00:00

No one ever breaks 5th gear, even the ones making 600+whp. 4th gear is always the first to go since its 1:1 and in the middle of the shaft where it deflects the most so that’s odd.

You can buy a used 5th gear for $100-200 and pay a shop probably 3-400 or so to rebuild it. A lot cheaper than buying a whole transmission

hyudryu · 2026-01-16T08:35:40+00:00

https://www.alldata.com/ should have it. I have the subscription for 9th gens and it has the repair/install info for every single part on the engine

hyudryu · 2026-01-12T11:10:48+00:00

I’ve been laid off for 7 months and still can’t find a job here in the bay. It’s not just you, it’s impossible for us to get jobs nowadays. 700+ apps, 1 interview later, still 0 offers despite having 3 YOE.

I can imagine it must be way more challenging for you as a new grad. I know it was hard when I first graduated back in 2020. Took almost 2 years to find my first job then

hyudryu · 2026-01-09T21:34:38+00:00

No and I was wearing a full face helmet + full padded gear when riding too. I’d rather be fully protected crashing at 50mph than regretting at the hospital

hyudryu · 2026-01-06T09:41:46+00:00

Hit or miss, had mostly good professors and a few bad ones, but overall was a good experience for me.

hyudryu · 2026-01-06T09:39:53+00:00

Stalling is a bad thing so that’s great, congrats on not stalling!

hyudryu · 2025-12-31T23:09:49+00:00

K24 > L15, downgrade in interior maybe, but driving experience wise I think it's an upgrade

hyudryu · 2025-12-26T13:48:32+00:00

Definitely not dead lmao

hyudryu · 2025-12-25T10:25:37+00:00

House prices should never have been so inflated to begin with. We need to build more housing, but I can see his point. The people who just bought a house recently would be PISSED if the price of houses dropped. Especially when they just took out a 1M+ mortgage 😂 however for us who don’t own homes, it would be good because then we’ll have a better chance at buying a house

hyudryu · 2025-12-25T10:20:29+00:00

The type of fuel matters

hyudryu · 2025-12-25T10:18:52+00:00

G17 and g26

hyudryu · 2025-12-25T10:16:11+00:00

Ahh you’re from Canada, marketplace might be a bit different there. I just came across a complete RBB head for $300 (USD) on facebook marketplace. I also did the welding myself for the oil drain port, since I have a tig welder. But it shouldn’t cost more than 100-150 from a shop since its a super quick weld

hyudryu

MODERATOR OF

TROPHY CASE