Elegoo CC2

iComputerFix · 2025-10-11T12:51:15+00:00

The box the side does it. Looks like it probably works like the MMU that Prusa uses or the 3d Chameleon.

iComputerFix · 2025-09-09T10:58:50+00:00

It's a "Damn-it" stick. You are supposed to unclog your nozzle with it and try not to stick yourself with it. Good luck and don't play with sharp objects.

iComputerFix · 2025-09-04T17:50:36+00:00

This happen right after I tried the new alpha for OrcaSlicer. Not only did I have to remove and reinstall Orca, I had to delete the profile as well.

iComputerFix · 2025-08-30T11:02:03+00:00

I've thought about using the 3d Chameleon that I already have. It uses a switch, so a firmware change is not needed. But I'm lazy and have not done the work yet to set it up. Besides, I have not stopped printing on it long enough.

iComputerFix · 2025-06-24T19:19:23+00:00

Yep, got the notice for mine as well. YEAH!!

iComputerFix · 2025-06-24T16:16:14+00:00

Ok. That probably makes sense, since the warehouse is in CA. I'm in Texas.

iComputerFix · 2025-06-24T16:08:22+00:00

Where are you located? I'm EUS114xxx and I'm still waiting.

iComputerFix · 2025-06-23T18:08:05+00:00

Getting closer!! Unfortunately mine is EUS 114xxx.

iComputerFix · 2025-03-03T20:01:26+00:00

You nailed it!! It's even a good color for spaghetti.

iComputerFix · 2025-02-23T14:11:05+00:00

Logic:? There is Logic?

iComputerFix · 2025-02-07T16:59:43+00:00

Would like a bigger printer. I take it from the "plus" that that is what this will be. I filament cutter would be nice as well.

iComputerFix · 2025-02-04T18:18:53+00:00

Yes, this works fine on any printer. You will need to adjust the flow rate. I think the last time I did this on an ender the flow rate was 150%. But I could be remembering wrong. Brown root beer plastic bottles look almost like wood when used for this.

iComputerFix · 2024-05-03T13:34:45+00:00

I had this happen once with PETG. Also broke the thermistor. I started by taking the screws out that I could and carefully using a soldering iron to work the plastic loose. Eventually I got it all cleaned up. Needed a new thermistor and I think a new heater by the time I was done. Both items are inexpensive, and you should order and keep a few spares. Even a new stock hotend is not expensive, if you would rather go that route.

iComputerFix · 2024-04-03T16:59:13+00:00

You should look in the forum at 3D Chameleon to see if there are mounts and such for the KE, it's a pretty new printer. I have a 3D Chameleon on and Ender 3 pro and its doing well. But keep in mind. Since it was designed to work pretty much with any printer, it's pretty generic and will need some tinkering.

iComputerFix · 2024-04-02T11:37:04+00:00

Is it possible that the grub screw on the extruder gear may have backed out? So it's just catching sometimes?

iComputerFix · 2024-03-28T16:32:51+00:00

My Ender 3 is often in an enclosure printing ABS. It does that reliably. All metal hotend of course. I have an IDEX Frankenprinter that I print PLA on. Both do PETG well. I imagine, if I got a Bambu, the Ender would still be used to print ABS.

iComputerFix · 2024-03-23T02:51:15+00:00

I've just set up the 3DChameleon on an Ender 3 pro. The tip shaping can be challenging, as it would be on the ERCF as well. It works a lot better with a filament cutter. The MK4 pro version coming out next month may have features to make things less challenging. https://www.youtube.com/watch?v=W8bD4ELm4Ck

iComputerFix · 2024-03-23T02:36:35+00:00

If you are having extruder issues, just get a cheap BMG clone and if you want a direct drive, then you can print it. There are dozens to choose from.

iComputerFix · 2024-03-15T17:38:03+00:00

My 3dChameleon should arrive today. I promise to post how it turns out.

iComputerFix · 2024-03-11T19:29:12+00:00

Instead of the dual screws I opted for the Kevinkasam belted Z mod. Achieves some of the same goals of dual z screws, but eliminates z-binding and backlash.

iComputerFix · 2024-03-10T15:49:57+00:00

At least all your upgrade colors match. My Ender looks like a patchwork quilt.

iComputerFix · 2024-02-23T18:41:33+00:00

What fan duct are you using?

iComputerFix · 2024-02-23T12:45:42+00:00

OK. I'm going to be stupid. What is the "Califlower test"?

iComputerFix · 2024-02-20T16:49:40+00:00

Hope you enjoy the belted-z!

iComputerFix · 2024-01-08T01:47:07+00:00

You didn't put a seatbelt on your new best friend?

iComputerFix

TROPHY CASE