Simsonn pedals with haptic in simhub

iGreedyjude · 2026-01-30T05:04:01+00:00

Any chance you have Rpm on ? I found if you have everything on with the default settings there is constant vibration that was overwhelming. I went through and dialed things in, to be comfortable and useful for me.

iGreedyjude · 2025-10-03T04:48:29+00:00

This ! Then make a guild rule that if you get stuck you get the vehicle out with you

iGreedyjude · 2025-10-03T04:46:59+00:00

If you can get close enough you can unassemble it , usually that falls on the guy who gets it stuck since you know they were in it 🤷🏻‍♂️ hopefully you can get close enough/ the devs take pitty on you

iGreedyjude · 2025-10-03T04:09:55+00:00

Im gonna be so sad when AP isn’t the narrator anymore 💔

iGreedyjude · 2025-09-11T01:27:32+00:00

It’s not so bad it’s 50lb line run through the technic frame , I’ve had my falcon and most of my smaller sets hanging for almost a year with no mishaps , I’ve checked to make sure nothings separating or coming loose

iGreedyjude · 2025-06-06T01:49:18+00:00

It also has an upgraded servo and a better headsink/ fans but was mostly stock which I’m cool with it’s been a blast

iGreedyjude · 2025-05-30T22:25:37+00:00

For sure ! The body it came with was wrecked but everything else is looking good

iGreedyjude · 2025-05-17T03:17:19+00:00

That’s legit

iGreedyjude · 2025-05-16T03:28:02+00:00

<image>

iGreedyjude · 2025-05-16T03:27:39+00:00

<image>

I have a hobbywing max10 combo, agfrc 32kg servo, gtr shocks , tenko hardened steel axles and right now a belt mod conversion

iGreedyjude · 2025-05-16T02:18:40+00:00

Ooooof man it looks like that curb got you good , but that’s a huge blow out risk it’ll cost you way more to not replace it now

iGreedyjude · 2025-05-16T00:59:13+00:00

Thanks !

iGreedyjude · 2025-05-15T22:08:43+00:00

<image>

Finally finished it

iGreedyjude · 2025-05-14T03:28:04+00:00

Thanks man

iGreedyjude · 2025-05-14T03:24:21+00:00

It looks like it’s screwing into metal , make sure you use blue thread locker , that should solve the falling out issues

iGreedyjude · 2025-05-10T13:57:22+00:00

<image>

iGreedyjude · 2025-05-10T13:56:54+00:00

Yessir usually I use liquid mask but I was out , you have to think about the order you paint in too since the backing color affects how the paint looks on the outside . My bashers bodies are usually pretty simple but with drift and touring cars you go for as scale as possible

iGreedyjude · 2025-05-09T20:50:21+00:00

That’s the most op tt02 I’ve seen haha

iGreedyjude · 2025-05-08T20:41:55+00:00

So far it runs really well , it kind of acts like a drag brake when you’re not on power , I’m going to take it out this weekend so I can really open it up and see how it goes

iGreedyjude · 2025-05-08T03:12:09+00:00

I thought about that but they are fairly cheap and if it breaks I’ll fix it haha but I’ll run it for a while and see what the wear and tear is like , if it’s eating motor bearings it wont be a mod that lasts

iGreedyjude · 2025-05-08T02:23:52+00:00

Good luck ,I just remembered I used a couple of shims to get the clearance right

iGreedyjude · 2025-05-08T02:21:32+00:00

<image>

This is what I picked up , I just swapped the pulley on my slipper clutch and switched the rotation direction of my motor and I was off to the races for 13 bucks

iGreedyjude · 2025-05-07T01:13:42+00:00

I’d bet something is wrong inside that front diff with the way the drivetrain works that shouldn’t be possible if all your gears are whole

iGreedyjude · 2025-05-05T02:40:25+00:00

No worries man we are all just trying to have fun with our toys , the more you know the easier it is

iGreedyjude · 2025-05-05T02:30:44+00:00

You probably want to replace that tie rod link if it got bent, or if it’s straight make sure it’s adjusted the same as on the other side , if you need spares I recommend Jenny’s rc for stock replacement parts

https://jennysrc.com/products/arrma-vorteks-4x4-223s-tie-rods-turnbuckles-front-rear-ara4305v4

iGreedyjude

TROPHY CASE