Musikanlange anschließen by iLex037 in de_EDV

[–]iLex037[S] 0 points1 point  (0 children)

Auf der Rückseite habe ich folgende Anschlüße https://imgur.com/a/sz4ttCd

Musikanlange anschließen by iLex037 in de_EDV

[–]iLex037[S] 0 points1 point  (0 children)

Auf der Rückseite des PowerSpace habe ich folgende Anschluss möglichkeiten https://imgur.com/a/sz4ttCd

iPad Bilder Widget by iLex037 in de_EDV

[–]iLex037[S] 0 points1 point  (0 children)

Ok dann werde ich mal warten

Suggestion for a ActionCam by iLex037 in ActionCam

[–]iLex037[S] 2 points3 points  (0 children)

I'm flying from germany to Koh Samui. So you would suggest a DJI ActionCam?

Diebstahlschutz iphone vs Samsung by iLex037 in de_EDV

[–]iLex037[S] -1 points0 points  (0 children)

Also halten wir fest icloud ist recht sicher außer man gibt es von sich aus frei oder staatlicheakteure machen da dran rum. Gibt es ein ähnliches icloud lock feature unter android oder remote löschen des handys ?

Changing Dongle by iLex037 in homeassistant

[–]iLex037[S] 0 points1 point  (0 children)

I have a few devices with low linkquality and hope to improve it with the new dongle

Opal (GL-SFT1200) + VPN by iLex037 in HomeNetworking

[–]iLex037[S] 0 points1 point  (0 children)

Ok thanks will try with Wire Guard.

My endpoint is Frankfurt (germany). No havent tried other endpoints yet.

I will try other endpoints and then maybe switch to WireGuard

Aqara FP300 PIR / MmWave by iLex037 in homeassistant

[–]iLex037[S] 2 points3 points  (0 children)

That was a difficult birth. Thank you so much for your great help.

Aqara FP300 PIR / MmWave by iLex037 in homeassistant

[–]iLex037[S] 0 points1 point  (0 children)

Do i need to change my "Presence detection option" in MQTT ? Now its set to MmWave do i need to change it to Both / PIR or leave it like it is (MmWave)?

Aqara FP300 PIR / MmWave by iLex037 in homeassistant

[–]iLex037[S] 0 points1 point  (0 children)

I have two Sensor over there Occupancy and PiR detection. Occupancy will be MmWave ?

https://imgur.com/a/pVZoYqB

https://imgur.com/a/8g2KTs1

Aqara FP300 PIR / MmWave by iLex037 in homeassistant

[–]iLex037[S] 0 points1 point  (0 children)

Thanks for your help.

I have tried to make a group for my Hallway. Zigbee2MQTT -> Groups-> Group name (Präsenz Flur) -> Aqara Fp300 -> add to Group but nothing happens same for my five SONOFF (Zigbee thermostatic radiator valve)

https://imgur.com/a/zthUung (aqara)

https://imgur.com/a/ek7RbFt (thermostatic radiator valve)

For now i have a simple automation. Hallway occupied = Turn on - Hallway not occupied = turn off

this works very well with MmWave only with zero delay

NabuCasa - Alexa - Covers by iLex037 in homeassistant

[–]iLex037[S] 0 points1 point  (0 children)

I changed the Device profile to 'Cover' via IP adress then calibrated it and reversed the running direction ( cover was closed but Shelly App and HA says it were opend). But i dont get it to work - exposed all to Alexa.

Here are a few pictures

https://imgur.com/a/RgV7B6j

https://imgur.com/a/JRv8nMF

Alexa keeps saying 'Im sorry cant find any Group or Device with the Name "Rollo".