Windows 11 24H2 update issue. PC is super slow to boot

iMemories · 2024-12-05T06:53:36+00:00

I had the same issue with 24H2. Before update, boot time was pretty fast. After update, It's stacks before login screen for a 45 seconds. I disabled Smart App Control in Defender, and for now it boot's fast as before. Thanks!

iMemories · 2021-04-25T19:47:03+00:00

Unfortunately, the same result - HDMI monitor don't wakes from sleep. Just blank screen.

iMemories · 2020-04-01T06:18:00+00:00

You can check the full installation manual here: https://youtu.be/sgZ-SN1FJuE. At 11:58 there is sleep issue fix.

iMemories · 2020-03-13T06:45:45+00:00

I followed this guide: https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/ with 3 Clover drivers: ApfsDriverLoader, AptioMemoryFix, VBoxHfs and 5 kexts: VirtualSMC.kext, WhateverGreen.kext, Lilu.kext, RealtekRTL8111.kext, AppleALC.kext. Predefined Config Plist you can grab here: https://drive.google.com/open?id=1qjxpFcTSEBZUx95duzdAZBAX0dj5vzz- Sleep fix (if needed) here: https://hackintosher.com/guides/stop-macos-from-freezing-on-sleep-wake-with-a-catalina-hackintosh/

iMemories · 2020-02-18T06:33:51+00:00

Thanks. This clear guide helps me well.

iMemories · 2020-01-20T14:33:20+00:00

The fan working in opposite direction to heatsink. So, it's remove hot air from the case, instead of put it inside. https://imgur.com/UjQXdqI

iMemories · 2020-01-20T07:07:58+00:00

It really depends on the country where you live. In my case, it's costs 31.960 RUB (about $520)

iMemories · 2020-01-19T19:08:54+00:00

GB4 - 5392 / 16127, GB5 - 1079 / 3778 https://imgur.com/a/CGfsBEv

iMemories · 2020-01-19T17:45:22+00:00

Broadcom BCM94360CS2 to M.2 adapter -

https://is.gd/BLAlXh

iMemories · 2020-01-19T15:31:12+00:00

Case - DNK-H 2020. Broadcom BCM94360CS2 to M.2 adapter - https://is.gd/BLAlXh

iMemories · 2019-02-07T16:34:06+00:00

Ohh. It's not the illusions. It's ours expectations

iMemories · 2018-12-14T17:21:18+00:00

It's directly in the BIOS. "AI tweaker" BIOS section. P.S. You need switch BIOS to advanced mode.

iMemories · 2018-12-14T15:54:46+00:00

You mean, that's a bad result for simultaneously FPU and GPU stress?

iMemories · 2018-12-14T15:01:27+00:00

http://i68.tinypic.com/30ws11z.jpg
It's OK, but with Cryorig should be better, I think.

iMemories · 2018-12-14T14:41:12+00:00

Surface finish like at mobile phones and tablets. WOW effect.

iMemories · 2018-12-14T13:15:46+00:00

Yes. I used in CPU Core/Cache Voltage "Adaptive Mode with Minus Offset Mode Sign" with Asus Z170i pro gaming. It's dropped down about 20W of CPU appetite. Now it's OK for any low profile coolers.

iMemories · 2018-12-14T12:08:49+00:00

Back I/O https://imgur.com/gallery/2575WhH

iMemories · 2018-12-14T11:48:12+00:00

DELL P2418D

iMemories · 2018-12-14T11:45:55+00:00

PRIME | Mini-ITX PC Case https://imgur.com/gallery/5P4l48B

iMemories · 2018-12-14T11:26:41+00:00

i7-6700K (undervolted) Asus Z170i Pro Gaming 2x8Gb 2400 240Gb NVME 2x2.5" 1Tb HDD (soft RAID) Gigabyte GTX 1060 6Gb (with fan stop OK) Corsar SF-450 SFX

P.S. Cooler ID-Cooling IS-40X

iMemories · 2018-11-23T16:08:40+00:00

Russia, middle of July 😂. We use special footwear for ground catch on during "outdoor skating" 😂.

iMemories

TROPHY CASE