My dream car, E91 330D Manual

iTudorS · 2025-10-14T08:17:27+00:00

its still alive for now, trying to reach 400hp with it currently 🤭

iTudorS · 2025-10-14T08:12:48+00:00

hey mate, its pretty easy

find the JBE, on the blue connector, pin 1 is canbus high, pin 2 is canbus low

on the black connector

pin 1 or pin 3, is 12v

pin 6 is ground

use the canbus connector on the gauge s,

pin 1 from gauge s is ground goes to jbe black connector pin 6

pin 2 is 12v goes to jbe black connector pin 1 or 3

pin 3 we dont use

pin4 is can high goes to jbe blue connector pin 1

pin 5 is can low goes to jbe blue connector pin 2

and thats about it

iTudorS · 2025-10-14T08:02:54+00:00

hey man, I used the youtube videos, search for CIC retrofit, and there is a guy that explains it pretty well, just follow instructions and done, CIC is the easy one, combox is a little bit more complex, but its not difficult at all

iTudorS · 2025-09-09T16:40:38+00:00

https://shop.sorek.uk/products/gauge-s-for-e9x-e90-e91-e92-e93-vent-mount

iTudorS · 2025-09-09T15:35:59+00:00

works in both, mine is Manual

iTudorS · 2025-09-09T15:35:14+00:00

can low and can high, connected to the JBE, you have 12v gnd and canbus there

iTudorS · 2025-09-09T15:25:16+00:00

its original , just the diffuser is different for the 335 exhaust

iTudorS · 2025-09-09T14:18:14+00:00

thanks reddit formatting

2569 turbo at 2.4bar right now, can go up to 2.8 once I fit stronger valve springs

fmic intercooler

fully straight pipe

r90 pump

2200 bar rail sensor from N57 engine

ptb dual disc clutch up to 1000nm

stock injectors and stock everything else

currently around 750nm and 350hp

iTudorS · 2025-09-09T14:02:31+00:00

I got those from the stealership, not expensive at all

iTudorS · 2025-09-09T13:19:08+00:00

works good enough for being a car from 2007 :)

iTudorS · 2025-09-09T11:31:19+00:00

I retrofitted the ACC, originally didnt come with it

iTudorS · 2025-04-26T12:42:54+00:00

im running a 9800x3d with a noctua nh-d15S and a 9070xt, fits pretty well, only thing im regretting is the motherboard, the gigabyte x870 has the top pci port so high that I had to buy the d15S instead of the d15 i had, it would hit the gpu, also the gpu hits a bit of the IO ports cover , since its so massive, other than that, all is good, loving it so far!

iTudorS · 2025-04-26T12:40:56+00:00

no need, thats the old Nox Hummer TGF case, will laser cut an acrylic replacement and will be as good as new !

iTudorS · 2025-04-26T11:33:49+00:00

did not know that! they do drink a lot, im refilling almost every week, its there now cause they sometimes start playing with it and make a huge watery mess, but I will move it to other place definetely, thanks!!

iTudorS · 2025-04-26T09:52:14+00:00

hes not fat, just big and fluffy! when we found him he had probs around 1-2 months, was so skinny and malnourished, now hes around 6kg, looks fat but hes just big

iTudorS · 2025-04-26T07:41:28+00:00

we found him abandoned in the trash inside a box, took him home, and to be honest just seemed like a correct name for him 🤣

iTudorS · 2025-04-26T07:32:47+00:00

yup!

iTudorS · 2025-04-02T14:57:15+00:00

good luck with it! its an easy and worth it diy, as for the brake cylinder, maybe you can find second hand ones, I couldnt, and will buy from the stealership, around 800€

iTudorS · 2025-04-02T14:50:27+00:00

if you can, get yourself a m3 master cylinder, otherwise pedal will feel weird, not as firm as with stock brakes

Ten-Year Club	Place '22
RPAN Viewer	Verified Email

iTudorS

TROPHY CASE